Sand Management and Erosion in Oil & Gas Production Systems - Analysis and Prediction Tools

2017 ◽  
Author(s):  
Emad Gharaibah ◽  
Yongli Zhang
Keyword(s):  
Systems Analysis ◽  
Production Systems ◽  
Gas Production ◽  
Prediction Tools

scholarly journals Evaluation of Calcium Carbonate Inhibitors Using Sintered Metal Filter in a Pressurized Dynamic System

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1849 ◽  
Author(s):  
Adriana Velloso Alves de Souza ◽  
Francisca Rosário ◽  
João Cajaiba
Keyword(s):  
Calcium Carbonate ◽  
Dynamic System ◽  
Heterogeneous Nucleation ◽  
Oil And Gas ◽  
Production Systems ◽  
Dynamic Test ◽  
Gas Production ◽  
Oil And Gas Production ◽  
Sintered Metal ◽  
Organophosphorus Inhibitors

Calcium carbonate scale is formed during oil and gas production. Tube-blocking tests (TBTs) are used to define the minimum inhibitory concentration (MIC) in order to prevent scale adhesion in the petroleum production system equipment. However, non-adhered crystals may favor heterogeneous nucleation to other deposits such as calcium naphthenates, causing a more severe scale problem, increasing production losses and treatment costs. The objective of the present work was to develop a new dynamic test methodology to determine the MIC for CaCO3 using a sintered metal filter. Organophosphorus inhibitors were selected for comparison with the conventional dynamic tube-blocking system. The results demonstrated that the use of the filter allowed an MIC of the inhibitors to be obtained considering the precipitation prevention. The inhibitor concentration in the conventional tube-blocking system does not prevent precipitation, acting only on adhesion and crystal growth on the capillary wall. Tests to evaluate the potential of calcium naphthenates formation in a naphthenate flow rig dynamic system demonstrated the influence of heterogeneous nucleation from non-adhered carbonate crystals, potentially aggravating deposition problems in oil and gas production systems.

scholarly journals Silage of Intercropping Corn, Palisade Grass, and Pigeon Pea Increases Protein Content and Reduces In Vitro Methane Production

Agronomy ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1784
Author(s):  
Beatriz Ligoski ◽  
Lucas Ferreira Gonçalves ◽  
Flavio Lopes Claudio ◽  
Estenio Moreira Alves ◽  
Ana Maria Krüger ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Methane Production ◽  
Nutritional Quality ◽  
Production Systems ◽  
Animal Feed ◽  
Lignin Content ◽  
Pigeon Pea ◽  
Gas Production ◽  
In Vitro Gas Production

Legume–grass intercropping systems are a sustainable option to improve nutritional quality of animal feed and decrease livestock greenhouse gas emissions. Thus, the present study evaluated yield, chemical composition and in vitro gas production of silages produced with intercropped palisade grass (Urochloa brizantha.(A.Rich.) R.D.Webster), pigeon pea (Cajanus cajan cv. Super N) and corn (Zea mays. L.). Forage was harvested and placed inside micro-silos, which were opened after 100 days and samples were collected for chemical composition and in vitro gas production analyses. Intercropped silage had higher crude protein, acid detergent fiber, and lignin content than corn silage. Moreover, intercropped silage decreased total gas and methane production. Therefore, intercropped silage showed potential to increase conserved feed nutritional quality and reduce methane emissions in livestock production systems.

Production-Systems Analysis for Fractured Wells

1988 ◽  
Vol 3 (04) ◽  
pp. 608-614 ◽  
Author(s):  
James L. Hunt
Keyword(s):  
Systems Analysis ◽  
Production Systems

Exergoeconomic Optimization of Oil and Gas Production Systems

2020 ◽  
Author(s):  
Meziane Akchiche ◽  
Jean-Louis Beauquin ◽  
Sabine Sochard ◽  
Sylvain Serra ◽  
Jean-Michel Reneaume ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Production Systems ◽  
Gas Production ◽  
Oil And Gas Production

Erosion of Elbows in Oil and Gas Production Systems

2012 ◽  
Vol 479-481 ◽  
pp. 1129-1132
Author(s):  
Wang Ming Bo
Keyword(s):  
Oil And Gas ◽  
Production Systems ◽  
Oil And Gas Industry ◽  
Gas Production ◽  
Gas Industry ◽  
Oil And Gas Production ◽  
Sand Erosion ◽  
The Subject ◽  
Erosion Mechanisms ◽  
Definitive Methods

This paper gives an overview of erosion mechanisms in elbows in oil and gas production systems. The nature of the erosion process itself makes it very difficult to develop some definitive methods or models to prevent or predict the erosion in elbows in all conditions. This paper provides a review of the subject which will help petroleum engineers to handle the erosion problems in oil and gas industry. This review is given of different erosion mechanisms connected with sand erosion and the factors that influence them, and then the review goes on to look at particulate erosion in elbows in more details. Conclusions are then drawn based on the above analyses.

A Method for the Verification of Subsea Equipment Subject to Hydrogen Induced Stress Cracking

2010 ◽  
Author(s):  
Michelangelo Fabbrizzi ◽  
Paolo Di Sisto ◽  
Roberto Merlo
Keyword(s):  
Oil And Gas ◽  
Production Systems ◽  
Local Stress ◽  
Gas Production ◽  
Stress And Strain ◽  
3D Analysis ◽  
Oil And Gas Production ◽  
Safety Issues ◽  
Stress Cracking ◽  
Induced Stress

Subsea oil and gas production systems can be subject to Hydrogen Induced Stress Cracking (“HISC”) depending on the material, cathodic protection and other factors. A failure in this kind of systems can lead to safety issues as well as environmental hazards and high repair costs. The analysis of recent failures has led to the recognition of HISC as a very important issue related to local stress and strain. This has necessitated the extensive use of Finite Elements Methods for the analysis of all system components. Since HISC is a recent issue, there are very few cases of such assessments reported in the literature. This paper is based on the assessment of the susceptibility of subsea piping manifolds of Duplex stainless steel to Hydrogen Induced Stress Cracking, which was conducted during the Skarv project by General Electric Oil & Gas. A variety of cases consisting of different loads and configurations were considered to give a broad assessment using a recently developed code (DNV-RP-F112-October2008). This work has led to the development of a set of procedures and models for the assessment of the entire system which is described in the current paper. The proposed methodology is useful for both design purposes and also for the verification of parts, which, if found to be non-compliant, would require redesign. In general, parts that were determined to be non-compliant using a linear assessment were found to be compliant through non-linear analysis, in fact 3D plastic analysis leads to a redistribution of stress and strain and hence, to lower values. “Cold creep” was not considered since the levels of stress and strain were considered to be low enough to avoid this phenomenon. As a consequence of this experience, a new methodology was developed, which is able to speed up the analysis process and to predict local stresses from only pipe elements. The latter permits the use of a linear assessment for bends, T junctions and weldolet even with misalignment and erosion, avoiding the need to perform 3D analysis. The second part of the paper describes this method.

A short-term operational planning model for natural gas production systems

AIChE Journal ◽  
2008 ◽  
Vol 54 (2) ◽  
pp. 495-515 ◽  
Author(s):  
Ajay Selot ◽  
Loi Kwong Kuok ◽  
Mark Robinson ◽  
Thomas L. Mason ◽  
Paul I. Barton
Keyword(s):  
Natural Gas ◽  
Production Systems ◽  
Gas Production ◽  
Operational Planning ◽  
Planning Model ◽  
Short Term ◽  
Natural Gas Production
Sign in / Sign up

Export Citation Format

Share Document