SS: Offshore Wind Energy Special Session: On Hurricane Risk to Offshore Wind Turbines in US Waters

2010 ◽  
Author(s):  
Alok Jha ◽  
Daniel K. Dolan ◽  
Walter Musial ◽  
Charles Smith
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Special Session ◽  
Offshore Wind Energy ◽  
Offshore Wind Turbines ◽  
Hurricane Risk

scholarly journals Offshore Wind Energy Resource Assessment across the Territory of Oman: A Spatial-Temporal Data Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2862
Author(s):  
Amer Al-Hinai ◽  
Yassine Charabi ◽  
Seyed H. Aghay Kaboli
Keyword(s):  
Data Analysis ◽  
Wind Energy ◽  
Wind Turbines ◽  
Energy Resource ◽  
Wind Farms ◽  
Offshore Wind ◽  
Wind Data ◽  
Offshore Wind Energy ◽  
Offshore Wind Turbines ◽  
Wind Potential

Despite the long shoreline of Oman, the wind energy industry is still confined to onshore due to the lack of knowledge about offshore wind potential. A spatial-temporal wind data analysis is performed in this research to find the locations in Oman’s territorial seas with the highest potential for offshore wind energy. Thus, wind data are statistically analyzed for assessing wind characteristics. Statistical analysis of wind data include the wind power density, and Weibull scale and shape factors. In addition, there is an estimation of the possible energy production and capacity factor by three commercial offshore wind turbines suitable for 80 up to a 110 m hub height. The findings show that offshore wind turbines can produce at least 1.34 times more energy than land-based and nearshore wind turbines. Additionally, offshore wind turbines generate more power in the Omani peak electricity demand during the summer. Thus, offshore wind turbines have great advantages over land-based wind turbines in Oman. Overall, this work provides guidance on the deployment and production of offshore wind energy in Oman. A thorough study using bankable wind data along with various logistical considerations would still be required to turn offshore wind potential into real wind farms in Oman.

Advanced Concept Offshore Wind Turbine Development

2014 ◽  
Vol 18 (5) ◽  
pp. 728-735 ◽  
Author(s):  
Abdollah A. Afjeh ◽  
◽  
Brett Andersen ◽  
Jin Woo Lee ◽  
Mahdi Norouzi ◽  
...  
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cost Savings ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Offshore Wind Energy ◽  
Offshore Wind Turbines ◽  
Floating Foundation ◽  
The Cost

Development of novel offshore wind turbine designs and technologies are necessary to reduce the cost of offshore wind energy since offshore wind turbines need to withstand ice and waves in addition to wind, a markedly different environment from their onshore counterparts. This paper focuses on major design challenges of offshore wind turbines and offers an advanced concept wind turbine that can significantly reduce the cost of offshore wind energy as an alternative to the current popular designs. The design consists of a two-blade, downwind rotor configuration fitted to a fixed bottom or floating foundation. Preliminary results indicate that cost savings of nearly 25% are possible compared with the conventional upwind wind turbine designs.

scholarly journals Optimal Design of Rated Wind Speed and Rotor Radius to Minimizing the Cost of Energy for Offshore Wind Turbines

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2728 ◽  
Author(s):  
Longfu Luo ◽  
Xiaofeng Zhang ◽  
Dongran Song ◽  
Weiyi Tang ◽  
Jian Yang ◽  
...  
Keyword(s):  
Wind Speed ◽  
Optimal Design ◽  
Wind Energy ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Design Parameters ◽  
Offshore Wind Energy ◽  
Offshore Wind Turbines ◽  
Cost Of Energy ◽  
The Cost

As onshore wind energy has depleted, the utilization of offshore wind energy has gradually played an important role in globally meeting growing green energy demands. However, the cost of energy (COE) for offshore wind energy is very high compared to the onshore one. To minimize the COE, implementing optimal design of offshore turbines is an effective way, but the relevant studies are lacking. This study proposes a method to minimize the COE of offshore wind turbines, in which two design parameters, including the rated wind speed and rotor radius are optimally designed. Through this study, the relation among the COE and the two design parameters is explored. To this end, based on the power-coefficient power curve model, the annual energy production (AEP) model is designed as a function of the rated wind speed and the Weibull distribution parameters. On the other hand, the detailed cost model of offshore turbines developed by the National Renewable Energy Laboratory is formulated as a function of the rated wind speed and the rotor radius. Then, the COE is formulated as the ratio of the total cost and the AEP. Following that, an iterative method is proposed to search the minimal COE which corresponds to the optimal rated wind speed and rotor radius. Finally, the proposed method has been applied to the wind classes of USA, and some useful findings have been obtained.

scholarly journals Quantifying the hurricane risk to offshore wind turbines

2012 ◽  
Vol 109 (9) ◽  
pp. 3247-3252 ◽  
Author(s):  
S. Rose ◽  
P. Jaramillo ◽  
M. J. Small ◽  
I. Grossmann ◽  
J. Apt
Keyword(s):  
Wind Turbines ◽  
Offshore Wind ◽  
Offshore Wind Turbines ◽  
Hurricane Risk

scholarly journals The Techno-Economic Potential of Offshore Wind Energy with Optimized Future Turbine Designs in Europe

2019 ◽  
Author(s):  
Dilara Gulcin Caglayan ◽  
Severin Ryberg ◽  
Heidi Heinrichs ◽  
Jochen Linßen ◽  
Detlef Stolten ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Wind Energy ◽  
Spatial Resolution ◽  
Wind Turbines ◽  
Energy Systems ◽  
Offshore Wind ◽  
Economic Potential ◽  
Offshore Wind Energy ◽  
The Future ◽  
Turbine Design

Renewable energy sources will play a central role in the sustainable energy systems of the future. Scenario analyses of such hypothesized energy systems require sound knowledge of the techno-economic potential of renewable energy technologies. Although there have been various studies concerning the potential of offshore wind energy, higher spatial resolution, as well as the future design concepts of offshore wind turbines, has not yet been addressed in sufficient detail. Here, we aim to overcome this gap by applying a high spatial resolution to the three main aspects of offshore wind potential analysis, namely ocean suitability, the simulation of wind turbines and cost estimation. A set of constraints is determined that reveal the available areas for turbine placement across Europe’s maritime boundaries. Then, turbine designs specific to each location are selected by identifying turbines with the cheapest levelized cost of electricity (LCOE), restricted to capacities, hub heights and rotor diameters of between 3-20 MW, 80-200 m and 80-280 m, respectively. Ocean eligibility and turbine design are then combined to distribute turbines across the available areas. Finally, LCOE trends are calculated from the individual turbine costs, as well as the corresponding capacity factor obtained by hourly simulation with wind speeds from 1980 to 2017. The results of cost-optimal turbine design reveal that the overall potential for offshore wind energy across Europe will constitute nearly 8.6 TW and 40.0 PWh at roughly 7 €ct kWh-1 average LCOE by 2050. Averaged design parameters at national level are provided in an appendix.

Condition Monitoring of Wind Turbine Drivetrain Bearings

2019 ◽  
Author(s):  
Konstantinos Gryllias ◽  
Junyu Qi ◽  
Alexandre Mauricio ◽  
Chenyu Liu
Keyword(s):  
Wind Energy ◽  
Condition Monitoring ◽  
Wind Turbines ◽  
Wind Farm ◽  
The Other ◽  
Offshore Wind ◽  
Center Frequency ◽  
Classical Statistic ◽  
Offshore Wind Turbines ◽  
Other Hand

Abstract The current pace of renewable energy development around the world is unprecedented, with offshore wind in particular proving to be an extremely valuable and reliable energy source. The global installed capacity of offshore wind turbines by the end of 2022 is expected to reach the 46.4 GW, among which 33.9 GW in Europe. Costs are critical for the future success of the offshore wind sector. The industry is pushing hard to make cost reductions to show that offshore wind is economically comparable to conventional fossil fuels. Efficiencies in Operations and Maintenance (O&M) offer potential to achieve significant cost savings as it accounts for around 20%–30% of overall offshore wind farm costs. One of the most critical and rather complex assembly of onshore, offshore and floating wind turbines is the gearbox. Gearboxes are designed to last till the end of the lifetime of the asset, according to the IEC 61400-4 standards. On the other hand, a recent study over approximately 350 offshore wind turbines indicate that gearboxes might have to be replaced as early as 6.5 years. Therefore sensing and condition monitoring systems for onshore, offshore and floating wind turbines are needed in order to obtain reliable information on the state and condition of different critical parts, focusing towards the detection and/or prediction of damage before it reaches a critical stage. The development and use of such technologies will allow companies to schedule actions at the right time, and thus will help reducing the costs of operation and maintenance, resulting in an increase of wind energy at a competitive price and thus strengthening productivity of the wind energy sector. At the academic level a plethora of methodologies have been proposed during the last decades for the analysis of vibration signatures focusing towards early and accurate fault detection with limited false alarms and missed detections. Among others, Envelope Analysis is one of the most important methodologies, where an envelope of the vibration signal is estimated, usually after filtering around a selected frequency band excited by impacts due to the faults. Different tools, such as Kurtogram, have been proposed in order to accurately select the optimum filter parameters (center frequency and bandwidth). Cyclostationary Analysis and corresponding methodologies, i.e. the Cyclic Spectral Correlation and the Cyclic Spectral Coherence, have been proved as powerful tools for condition monitoring. On the other hand the application, test and evaluation of such tools on general industrial cases is still rather limited. Therefore the main aim of this paper is the application and evaluation of advanced diagnostic techniques and diagnostic indicators, including the Enhanced Envelope Spectrum and the Spectral Flatness on real world vibration data collected from vibration sensors on gearboxes in multiple wind turbines over an extended period of time of nearly four years. The diagnostic indicators are compared with classical statistic time and frequency indicators, i.e. Kurtosis, Crest Factor etc. and their effectiveness is evaluated based on the successful detection of two failure events.

Geotechnical Stability of Gravity Base Foundations for Offshore Wind Turbines on Granular Soils

2012 ◽  
Author(s):  
Germán Sedlacek ◽  
Alina Miehe ◽  
Ana Libreros ◽  
Yousef Heider
Keyword(s):  
Wind Energy ◽  
Wind Turbines ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Good Alternative ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbines ◽  
Geotechnical Design ◽  
And Performance

Offshore wind energy farms have gained much attention during the last years in Germany and all over the world. In the construction of offshore wind turbines, piled foundations have been mostly used so far. However, gravity base foundations represent a good alternative as they minimize the typical high risks of the offshore works, such as weather-dependent installation, operational safety, construction sequence and performance. The whole wind energy turbine is assembled onshore and promptly transported to the planned location. In the design of the gravity foundation under cyclic loading conditions, it is essential to avoid inadmissibly large reductions of the subsoil bearing capacity due to the excess pore-water pressure (loss of stability) and tilting of the foundation caused by the accumulation of settlements (loss of serviceability). This paper provides a description of the soil-mechanical behaviour of gravity base foundations and gives an account of the current available rules and standards for dimensioning foundations of this type. In this regard, a procedure for the geotechnical design of a gravity base foundation is laid out, where this work points out that the existing standards for designing gravity base foundations need to be further developed. Moreover, a brief summary of the results at a full-scale model test, according to the present state of testing and knowledge, are given.

Sign in / Sign up

Export Citation Format

Share Document