Base Material Considerations and the Selection of NACE Approved High-Strength Alloy Overlay for Use on HP/HT Exploration and Production Equipment

2008 ◽  
Author(s):  
Phil Huff ◽  
Shafiqul Islam Khandoker ◽  
Greg Landthrip ◽  
Melissa Newbury
Keyword(s):  
Base Material ◽  
High Strength ◽  
Production Equipment ◽  
Exploration And Production ◽  
Strength Alloy ◽  
Selection Of

Nanomaterials and Nanocomposites Thermal and Mechanical Properties Modelling

2019 ◽  
pp. 234-256 ◽  
Author(s):  
Siddhartha Kosti
Keyword(s):  
Thermal Properties ◽  
Structural Properties ◽  
Base Material ◽  
High Strength ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Weight Percentage ◽  
Structural Applications ◽  
Glass Frp ◽  
Selection Of

This chapter deals with the modelling of nanomaterial and nanocomposite mechanical and thermal properties. Enrichment in the technology requires materials having higher thermal properties or higher structural properties. Nanomaterials and nanocomposites can serve this purpose accurately for aerospace or thermal applications and structural applications respectively. The thermal system requires materials having high thermal conductivity while structural system requires materials having high strength. Selection of the material for particular application is very critical and requires knowledge and experience. Al, Cu, TiO2, Al2O3, etc. are considered for thermal applications while epoxy-glass, FRP, etc. are considered for structural applications. Modelling of these nanomaterials and nanocomposites is done with the help of different mathematical models available in the literature. Results show that addition of the nanoparticle/composite in the base material can enhance the thermal and structural properties. Results also show that amount of weight percentage added also affects the properties.

Nanomaterials and Nanocomposites Thermal and Mechanical Properties Modelling

2021 ◽  
pp. 180-199
Author(s):  
Siddhartha Kosti
Keyword(s):  
Thermal Properties ◽  
Structural Properties ◽  
Base Material ◽  
High Strength ◽  
Mechanical And Thermal Properties ◽  
Thermal And Mechanical Properties ◽  
Weight Percentage ◽  
Structural Applications ◽  
Glass Frp ◽  
Selection Of

This chapter deals with the modelling of nanomaterial and nanocomposite mechanical and thermal properties. Enrichment in the technology requires materials having higher thermal properties or higher structural properties. Nanomaterials and nanocomposites can serve this purpose accurately for aerospace or thermal applications and structural applications respectively. The thermal system requires materials having high thermal conductivity while structural system requires materials having high strength. Selection of the material for particular application is very critical and requires knowledge and experience. Al, Cu, TiO2, Al2O3, etc. are considered for thermal applications while epoxy-glass, FRP, etc. are considered for structural applications. Modelling of these nanomaterials and nanocomposites is done with the help of different mathematical models available in the literature. Results show that addition of the nanoparticle/composite in the base material can enhance the thermal and structural properties. Results also show that amount of weight percentage added also affects the properties.

HREM interface studies in SiC-whisker-reinforced Al2O3 and Si3N4 ceramics

1988 ◽  
Vol 46 ◽  
pp. 734-735
Author(s):  
W. Braue ◽  
R.W. Carpenter ◽  
D.J. Smith
Keyword(s):  
Analytical Data ◽  
Base Material ◽  
High Strength ◽  
Ceramic Composites ◽  
Good Thermal Stability ◽  
All Ceramic ◽  
Sic Whiskers ◽  
Base Composite ◽  
C 30 ◽  
Si3n4 Ceramics

Whisker and fiber reinforcement has been established as an effective toughening concept for monolithic structural ceramics to overcome limited fracture toughness and brittleness. SiC whiskers in particular combine both high strength and elastic moduli with good thermal stability and are compatible with most oxide and nonoxide matrices. As the major toughening mechanisms - crack branching, deflection and bridging - in SiC whiskenreinforced Al2O3 and Si3N41 are critically dependent on interface properties, a detailed TEM investigation was conducted on whisker/matrix interfaces in these all-ceramic- composites.In this study we present HREM images obtained at 400 kV from β-SiC/α-Al2O3 and β-SiC/β-Si3N4 interfaces, as well as preliminary analytical data. The Al2O3- base composite was hotpressed at 1830 °C/60 MPa in vacuum and the Si3N4-base material at 1725 °C/30 MPa in argon atmosphere, respectively, adding a total of 6 vt.% (Y2O3 + Al2O3) to the latter to promote densification.

Microstructure of resistance spot welding of maraging steels

1990 ◽  
Vol 48 (4) ◽  
pp. 900-901
Author(s):  
I. Neuman ◽  
S.F. Dirnfeld ◽  
I. Minkoff
Keyword(s):  
Maraging Steel ◽  
Spot Welding ◽  
Lath Martensite ◽  
Base Material ◽  
Aging Treatment ◽  
High Strength ◽  
Maraging Steels ◽  
Heat Treated ◽  
Current Cycle ◽  
Welding Processes

Experimental work on the spot welding of Maraging Steels revealed a surprisingly low level of strength - both in the as welded and in aged conditions. This appeared unusual since in the welding of these materials by other welding processes (TIG,MIG) the strength level is almost that of the base material. The maraging steel C250 investigated had the composition: 18wt%Ni, 8wt%Co, 5wt%Mo and additions of Al and Ti. It has a nominal tensile strength of 250 KSI. The heat treated structure of maraging steel is lath martensite the final high strength is reached by aging treatment at 485°C for 3-4 hours. During the aging process precipitation takes place of Ni3Mo and Ni3Ti and an ordered solid solution containing Co is formed.Three types of spot welding cycles were investigated: multi-pulse current cycle, bi-pulse cycle and single pulsle cycle. TIG welded samples were also tested for comparison.The microstructure investigations were carried out by SEM and EDS as well as by fractography. For multicycle spot welded maraging C250 (without aging), the dendrites start from the fusion line towards the nugget centre with an epitaxial growth region of various widths, as seen in Figure 1.

ASTM A710

Alloy Digest ◽  
1990 ◽  
Vol 39 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Steel Plate ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Bethlehem Steel Corporation ◽  
Strength Alloy ◽  
Carbon Precipitation

Abstract ASTM A710 is a low-carbon, precipitation hardening high-strength alloy steel plate. It is well suited to critical applications. This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: SA-446. Producer or source: Bethlehem Steel Corporation.

scholarly journals Circular Economy Strategies for Equipment Lifetime Extension: A Systematic Review

2021 ◽  
Vol 13 (3) ◽  
pp. 1117
Author(s):  
Alessandro Fontana ◽  
Andrea Barni ◽  
Deborah Leone ◽  
Maurizio Spirito ◽  
Agata Tringale ◽  
...  
Keyword(s):  
Life Cycle ◽  
Circular Economy ◽  
Resource Scarcity ◽  
Production Equipment ◽  
Environmental Standards ◽  
Multiple Strategies ◽  
Medium Enterprise ◽  
Equipment Lifetime ◽  
Selection Of ◽  
Lifetime Extension

Even if the economy nowadays is still locked into a linear model of production, tighter environmental standards, resource scarcity and changing consumer expectations are forcing organizations to find alternatives to lighten their impacts. The concept of Circular Economy (CE) is to an increasing extent treated as a solution to this series of challenges. That said, the multitude of approaches and definitions around CE and Life Cycle Extension Strategies (LCES) makes it difficult to provide (Small and Medium Enterprise) SMEs with a consistent understanding of the topic. This paper aims at bridging this gap by providing a systematic literature review of the most prominent papers related to the CE and lifetime extension, with a particular focus on the equipment and machinery sector. A taxonomy was used to define and cluster a subset of selected papers to build a homogeneous approach for understanding the multiple strategies used in the industry, and the standards in maintenance and remanufacturing strategies. As a final research step, we also propose a Strategy Characterization Framework (SCF) to build the ground for the selection of the best strategy to be applied for production equipment life cycle extension on several industrial use cases.

scholarly journals Development of laser welding of high strength aluminium alloy 2024-T4 with controlled thermal cycle

2020 ◽  
Vol 326 ◽  
pp. 08005
Author(s):  
Mete Demirorer ◽  
Wojciech Suder ◽  
Supriyo Ganguly ◽  
Simon Hogg ◽  
Hassam Naeem
Keyword(s):  
Laser Beam ◽  
Laser Welding ◽  
Heat Input ◽  
Thermal Cycle ◽  
Laser Beam Welding ◽  
Base Material ◽  
High Strength ◽  
Cooling Rates ◽  
Aa 2024 ◽  
Welding Processes

An innovative process design, to avoid thermal degradation during autogenous fusion welding of high strength AA 2024-T4 alloy, based on laser beam welding, is being developed. A series of instrumented laser welds in 2 mm thick AA 2024-T4 alloys were made with different processing conditions resulting in different thermal profiles and cooling rates. The welds were examined under SEM, TEM and LOM, and subjected to micro-hardness examination. This allowed us to understand the influence of cooling rate, peak temperature, and thermal cycle on the growth of precipitates, and related degradation in the weld and heat affected area, evident as softening. Although laser beam welding allows significant reduction of heat input, and higher cooling rates, as compared to other high heat input welding processes, this was found insufficient to completely supress coarsening of precipitate in HAZ. To understand the required range of thermal cycles, additional dilatometry tests were carried out using the same base material to understand the time-temperature relationship of precipitate formation. The results were used to design a novel laser welding process with enhanced cooling, such as with copper backing bar and cryogenic cooling.

Sign in / Sign up

Export Citation Format

Share Document