Exposing the 4D Seismic Time-Lapse Signal Imbedded in the Foinaven Active Reservoir Management Project

2000 ◽  
Author(s):  
Jack G. Bouska ◽  
Andrew R. O'Donovan
Keyword(s):  
Reservoir Management ◽  
Time Lapse ◽  
Management Project ◽  
4D Seismic

Time-Lapse Seismic for Reservoir Management: Case Studies From Offshore Niger Delta, Nigeria

2016 ◽  
Vol 19 (03) ◽  
pp. 391-402
Author(s):  
Sunday Amoyedo ◽  
Emmanuel Ekut ◽  
Rasaki Salami ◽  
Liliana Goncalves-Ferreira ◽  
Pascal Desegaulx
Keyword(s):  
Case Studies ◽  
Niger Delta ◽  
Reservoir Management ◽  
Time Lapse ◽  
Seismic Survey ◽  
Elastic Model ◽  
Field Development ◽  
4D Seismic ◽  
The Impact

Summary This paper presents case studies focused on the interpretation and integration of seismic reservoir monitoring from several fields in conventional offshore and deepwater Niger Delta. The fields are characterized by different geological settings and development-maturity stages. We show different applications varying from qualitative to quantitative use of time-lapse (4D) seismic information. In the first case study, which is in shallow water, the field has specific reservoir-development challenges, simple geology, and is in phased development. On this field, 4D seismic, which was acquired several years ago, is characterized by poor seismic repeatability. Nevertheless, we show that because of improvements from seismic reprocessing, 4D seismic makes qualitative contributions to the ongoing field development. In the second case study, the field is characterized by complex geological settings. The 4D seismic is affected by overburden with strong lateral variations in velocity and steeply dipping structure (up to 40°). Prestack-depth-imaging (PSDM) 4D seismic is used in a more-qualitative manner to monitor gas injection, validate the geologic/reservoir models, optimize infill injector placement, and consequently, enhance field-development economics. The third case study presents a deep offshore field characterized by a complex depositional system for some reservoirs. In this example, good 4D-seismic repeatability (sum of source- and receiver-placement differences between surveys, dS+dR) is achieved, leading to an increased quantitative use of 4D monitoring for the assessment of sand/sand communication, mapping of oil/water (OWC) front, pressure evolution, and dynamic calibration of petro-elastic model (PEM), and also as a seismic-based production-logging tool. In addition, 4D seismic is used to update seismic interpretation, provide a better understanding of internal architecture of the reservoirs units, and, thereby, yield a more-robust reservoir model. The 4D seismic in this field is a key tool for field-development optimization and reservoir management. The last case study illustrates the need for seismic-feasibility studies to detect 4D responses related to production. In addition to assessing the impact of the field environment on the 4D- seismic signal, these studies also help in choosing the optimum seismic-survey type, design, and acquisition parameters. These studies would possibly lead to the adoption of new technologies such as broad-band streamer or nodes acquisition in the near future.

Time Lapse (4D) Seismic for Reservoir Management: Case Studies from Offshore Niger Delta, Nigeria

2014 ◽  
Author(s):  
Sunday Oluleye Amoyedo ◽  
Emmanuel Ekut ◽  
Rasaki Salami ◽  
Liliana Goncalves-Ferreira ◽  
Pascal Desegaulx
Keyword(s):  
Case Studies ◽  
Niger Delta ◽  
Reservoir Management ◽  
Time Lapse ◽  
4D Seismic

Machine learning to reduce cycle time for time-lapse seismic data assimilation into reservoir management

2019 ◽  
Vol 7 (3) ◽  
pp. SE123-SE130
Author(s):  
Yang Xue ◽  
Mariela Araujo ◽  
Jorge Lopez ◽  
Kanglin Wang ◽  
Gautam Kumar
Keyword(s):  
Machine Learning ◽  
Data Assimilation ◽  
Seismic Data ◽  
Reservoir Management ◽  
Time Lapse ◽  
Water Flooding ◽  
Reservoir Models ◽  
Reservoir Property ◽  
Property Changes ◽  
4D Seismic

Time-lapse (4D) seismic is widely deployed in offshore operations to monitor improved oil recovery methods including water flooding, yet its value for enhanced well and reservoir management is not fully realized due to the long cycle times required for quantitative 4D seismic data assimilation into dynamic reservoir models. To shorten the cycle, we have designed a simple inversion workflow to estimate reservoir property changes directly from 4D attribute maps using machine-learning (ML) methods. We generated tens of thousands of training samples by Monte Carlo sampling from the rock-physics model within reasonable ranges of the relevant parameters. Then, we applied ML methods to build the relationship between the reservoir property changes and the 4D attributes, and we used the learnings to estimate the reservoir property changes given the 4D attribute maps. The estimated reservoir property changes (e.g., water saturation changes) can be used to analyze injection efficiency, update dynamic reservoir models, and support reservoir management decisions. We can reduce the turnaround time from months to days, allowing early engagements with reservoir engineers to enhance integration. This accelerated data assimilation removes a deterrent for the acquisition of frequent 4D surveys.

scholarly journals Time-Lapse Seismic Monitoring of Onshore Reservoirs in Niger Delta, Field ‘K’ as a Case Study

2017 ◽  
Vol 1 (1) ◽  
pp. 23-27 ◽  
Author(s):  
A. Ogbamikhumi ◽  
T. Tralagba ◽  
E. E. Osagiede
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
Niger Delta ◽  
Rock Physics ◽  
Time Lapse ◽  
Seismic Survey ◽  
Impedance Change ◽  
Data Set ◽  
Reservoir Fluid ◽  
4D Seismic

Field ‘K’ is a mature field in the coastal swamp onshore Niger delta, which has been producing since 1960. As a huge producing field with some potential for further sustainable production, field monitoring is therefore important in the identification of areas of unproduced hydrocarbon. This can be achieved by comparing production data with the corresponding changes in acoustic impedance observed in the maps generated from base survey (initial 3D seismic) and monitor seismic survey (4D seismic) across the field. This will enable the 4D seismic data set to be used for mapping reservoir details such as advancing water front and un-swept zones. The availability of good quality onshore time-lapse seismic data for Field ‘K’ acquired in 1987 and 2002 provided the opportunity to evaluate the effect of changes in reservoir fluid saturations on time-lapse amplitudes. Rock physics modelling and fluid substitution studies on well logs were carried out, and acoustic impedance change in the reservoir was estimated to be in the range of 0.25% to about 8%. Changes in reservoir fluid saturations were confirmed with time-lapse amplitudes within the crest area of the reservoir structure where reservoir porosity is 0.25%. In this paper, we demonstrated the use of repeat Seismic to delineate swept zones and areas hit with water override in a producing onshore reservoir.

3D DAS-VSP Illumination Modeling for CO2 Plume Migration Monitoring in Offshore Sarawak, Malaysia

2021 ◽  
Author(s):  
Pankaj Kumar Tiwari ◽  
Zoann Low ◽  
Parimal Arjun Patil ◽  
Debasis Priyadarshan Das ◽  
Prasanna Chidambaram ◽  
...  
Keyword(s):  
Dynamic Simulation ◽  
Seismic Velocity ◽  
Time Lapse ◽  
Carbonate Reservoir ◽  
Fiber Optic Sensor ◽  
Co2 Injection ◽  
Storage Site ◽  
Plume Migration ◽  
Co2 Plume ◽  
4D Seismic

Abstract Monitoring of CO2 plume migration in a depleted carbonate reservoir is challenging and demand comprehensive and trailblazing monitoring technologies. 4D time-lapse seismic exhibits the migration of CO2 plume within geological storage but in the area affected by gas chimney due to poor signal-to-noise ratio (SNR), uncertainty in identifying and interpretation of CO2 plume gets exaggerated. High resolution 3D vertical seismic profile (VSP) survey using distributed acoustic sensor (DAS) technology fulfil the objective of obtaining the detailed subsurface image which include CO2 plume migration, reservoir architecture, sub-seismic faults and fracture networks as well as the caprock. Integration of quantitative geophysics and dynamic simulation with illumination modelling dignify the capabilities of 3D DAS-VSP for CO2 plume migration monitoring. The storage site has been studied in detailed and an integrated coupled dynamic simulation were performed and results were integrated with seismic forward modeling to demonstrate the CO2 plume migration with in reservoir and its impact on seismic amplitude. 3D VSP illumination modelling was carried out by integrating reservoir and overburden interpretations, acoustic logs and seismic velocity to illustrate the subsurface coverage area at top of reservoir. Several acquisition survey geometries were simulated based on different source carpet size for effective surface source contribution for subsurface illumination and results were analyzed to design the 3D VSP survey for early CO2 plume migration monitoring. The illumination simulation was integrated with dynamic simulation for fullfield CO2 plume migration monitoring with 3D DAS-VSP by incorporating Pseudo wells illumination analysis. Results of integrated coupled dynamic simulation and 4D seismic feasibility were analyzed for selection of best well location to deploy the multi fiber optic sensor system (M-FOSS) technology. Amplitude response of synthetic AVO (amplitude vs offsets) gathers at the top of carbonate reservoir were analyzed for near, mid and far angle stacks with respect to pre-production as well as pre-injection reservoir conditions. Observed promising results of distinguishable 25-30% of CO2 saturation in depleted reservoir from 4D time-lapse seismic envisage the application of 3D DAS-VSP acquisition. The source patch analysis of 3D VSP illumination modelling results indicate that a source carpet of 6km×6km would be cos-effectively sufficient to produce a maximum of approximately 2km in diameter subsurface illumination at the top of the reservoir. The Pseudo wells illumination analysis results show that current planned injection wells would probably able to monitor early CO2 injection but for the fullfield monitoring additional monitoring wells or a hybrid survey of VSP and surface seismic would be required. The integrated modeling approach ensures that 4D Seismic in subsurface CO2 plume monitoring is robust. Monitoring pressure build-ups from 3D DAS-VSP will reduce the associated risks.

Coupling Time-lapse Monitoring by Satellite Data and Numerical Geomechanical Models for Reservoir Management

KazGeo 2012 ◽  
2012 ◽  
Author(s):  
A. Tamburini ◽  
M. Minini ◽  
A. Higgs ◽  
P. Teatini ◽  
M. Ferronato ◽  
...  
Keyword(s):  
Satellite Data ◽  
Reservoir Management ◽  
Time Lapse ◽  
Coupling Time

Assessment of 4D seismic repeatability and CO2 detection limits using a sparse permanent land array at the Aquistore CO2 storage site

Geophysics ◽  
2015 ◽  
Vol 80 (2) ◽  
pp. WA1-WA13 ◽  
Author(s):  
Lisa A. N. Roach ◽  
Donald J. White ◽  
Brian Roberts
Keyword(s):  
Co2 Storage ◽  
Time Lapse ◽  
Data Sets ◽  
Storage Site ◽  
Processing Sequence ◽  
Time Migration ◽  
Receiver Array ◽  
Co2 Detection ◽  
4D Seismic ◽  
The Impact

Two 3D time-lapse seismic surveys were acquired in 2012 and 2013 at the Aquistore [Formula: see text] storage site prior to the start of [Formula: see text] injection. Using these surveys, we determined the background time-lapse noise at the site and assessed the feasibility of using a sparse areal permanent receiver array as a monitoring tool. Applying a standard processing sequence to these data, we adequately imaged the reservoir at 3150–3350 m depth. Evaluation of the impact of each processing step on the repeatability revealed a general monotonic increase in similarity between the data sets as a function of processing. The prestack processing sequence reduced the normalized root mean squared difference (nrms) from 1.13 between the raw stacks to 0.13 after poststack time migration. The postmigration cross-equalization sequence further reduced the global nrms to 0.07. A simulation of the changes in seismic response due to a range of [Formula: see text] injection scenarios suggested that [Formula: see text] was detectable within the reservoir at the Aquistore site provided that zones of greater thickness than 6–13 m have reached [Formula: see text] saturations of greater than 5%.

Sign in / Sign up

Export Citation Format

Share Document