The Hibernia Oil Field: Integration of Geophysical, Geological, and Production Data Into Reservoir Characterization and Monitoring

1999 ◽  
Author(s):  
Larry J. Sydora
Keyword(s):  
Reservoir Characterization ◽  
Oil Field ◽  
Production Data ◽  
Hibernia Oil Field

Analytical Work Flows Enable Continuous Waterflooding Optimization for a Mature Field

2021 ◽  
Vol 73 (01) ◽  
pp. 55-56
Author(s):  
Chris Carpenter
Keyword(s):  
Correlation Analysis ◽  
Cross Correlation ◽  
Reservoir Characterization ◽  
Oil Field ◽  
Water Flooding ◽  
Analytical Models ◽  
Production Data ◽  
Cross Correlation Analysis ◽  
Analytical Work ◽  
Performance Behavior

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 198586, “A New Continuous Waterflood Operations Optimization for a Mature Oil Field by Use of Analytical Work Flows That Improve Reservoir Characterization,” by Atul Yadav and Anton Malkov, SPE, Wintershall, and Essam Omara, Suez Oil Company, et al., prepared for the 2019 SPE Gas and Oil Technology Showcase and Conference, Dubai, 21–23 October. The paper has not been peer reviewed. In the complete paper, the authors present a novel approach that uses data-mining techniques on operations data of a complex mature oil field in the Gulf of Suez that is currently being waterflooded. Evidence is presented about how salinity data can be used to further justify the linkages between different wells obtained from cross-correlation analysis. The results presented in this research can be adapted to any waterflooded field to optimize recovery at frequent intervals where injection and production data are available continuously. Introduction Mature oil fields typically present challenges of increased water production and water handling. Considering the geological complexity and associated field-performance behavior, reservoir characterization to optimize water flooding is a major challenge. An integrated reservoir study was con ducted to minimize reservoir uncertainties and increase understanding of the field’s performance behavior. The acceptable history-matched model was used to estimate remaining oil potential, maintain and increase current production levels, and optimize the water-injection rate. Generally, history-matched models need to be updated throughout the life of producing fields as new subsurface data are acquired. Such integrated reservoir modeling studies, however, can be time-consuming and do not necessarily enable quicker decision-making around operational activities. The continuous recording of production and injection data presents new opportunities to apply novel analytical techniques to understand interwell connectivity in the reservoir. The current ability to store and analyze data, coupled with advances in the ability to interpret big data sets, has helped create an independent toolkit that provides analysis without the geological model. In addition, geological information such as pre-existing faults and the commingled or disconnected nature of production between different layers can be integrated to obtain and improve analyses from the analytical models. The authors analyze the results using Pearson’s cross-correlation analysis measure to obtain a qualitative analysis of the field. They also apply Spearman’s rank correlation analysis for the discussed field (henceforth named GOS for purposes of this paper) that helps compare injection and production data. The objective is to present a comparison between the analytical and the stream-lined approach to show consistency in reservoir characterization. The effective injector/producer pairs identified form an important component of the field development.

scholarly journals Ensemble Machine Learning Assisted Reservoir Characterization Using Field Production Data–An Offshore Field Case Study

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1052
Author(s):  
Baozhong Wang ◽  
Jyotsna Sharma ◽  
Jianhua Chen ◽  
Patricia Persaud
Keyword(s):  
Machine Learning ◽  
Random Forest ◽  
Reservoir Characterization ◽  
Time Lapse ◽  
Production Data ◽  
Oil Saturation ◽  
Ensemble Machine Learning ◽  
Input Parameters ◽  
Saturation Profiles ◽  
Field Production

Estimation of fluid saturation is an important step in dynamic reservoir characterization. Machine learning techniques have been increasingly used in recent years for reservoir saturation prediction workflows. However, most of these studies require input parameters derived from cores, petrophysical logs, or seismic data, which may not always be readily available. Additionally, very few studies incorporate the production data, which is an important reflection of the dynamic reservoir properties and also typically the most frequently and reliably measured quantity throughout the life of a field. In this research, the random forest ensemble machine learning algorithm is implemented that uses the field-wide production and injection data (both measured at the surface) as the only input parameters to predict the time-lapse oil saturation profiles at well locations. The algorithm is optimized using feature selection based on feature importance score and Pearson correlation coefficient, in combination with geophysical domain-knowledge. The workflow is demonstrated using the actual field data from a structurally complex, heterogeneous, and heavily faulted offshore reservoir. The random forest model captures the trends from three and a half years of historical field production, injection, and simulated saturation data to predict future time-lapse oil saturation profiles at four deviated well locations with over 90% R-square, less than 6% Root Mean Square Error, and less than 7% Mean Absolute Percentage Error, in each case.

Digital Workflow to Enhance Reservoir Management Strategies for A Complex Oil Field Through Real Time and Advanced Engineering Monitoring Solution

2021 ◽  
Author(s):  
Julieta Alvarez ◽  
Oswaldo Espinola ◽  
Luis Rodrigo Diaz ◽  
Lilith Cruces
Keyword(s):  
Real Time ◽  
Reservoir Characterization ◽  
Management Strategies ◽  
Reservoir Management ◽  
Gas Production ◽  
Oil Field ◽  
Oil Reservoirs ◽  
Production Operation ◽  
Digital Workflow ◽  
Operational Decisions

Abstract Increase recovery from mature oil reservoirs requires the definition of enhanced reservoir management strategies, involving the implementation of advanced methodologies and technologies in the field's operation. This paper presents a digital workflow enabling the integration of commonly isolated elements such as: gauges, flowmeters, inflow control devices; analysis methods and data, used to improve scientific understanding of subsurface flow dynamics and determine improved operational decisions that support field's reservoir management strategy. It also supports evaluation of reservoir extent, hydraulic communication, artificial lift impact in the near-wellbore zone and reservoir response to injected fluids and coning phenomenon. This latest is used as an example to demonstrate the applicability of this workflow to improve and support operational decisions, minimizing water and gas production due to coning, that usually results in increasing production operation costs and it has a direct impact decreasing reservoir energy in mature saturated oil reservoirs. This innovative workflow consists on the continuous interpretation of data from downhole gauges, referred in this paper as data-driven; as well as analytical and numerical simulation methodologies using real-time raw data as an input, referred in this paper as model-driven, not commonly used to analyze near wellbore subsurface phenomena like coning and its impact in surface operation. The resulting analyses are displayed through an extensive visualization tool that provides instant insight to reservoir characterization and productivity groups, improving well and reservoir performance prediction capabilities for complex reservoirs such as mature saturated reservoirs with an associated aquifer, where undesired water and gas production is a continuous challenge that incorporates unexpected operational expenses.

Diagnostic Plots for Production Decline During the Transition of Oil Field Development From Depletion to Water Injection

2021 ◽  
Author(s):  
Vil Syrtlanov ◽  
Yury Golovatskiy ◽  
Ivan Ishimov
Keyword(s):  
Water Injection ◽  
Simulation Models ◽  
Oil Field ◽  
Production Data ◽  
Oil Reservoir ◽  
Field Development ◽  
Well Production ◽  
Diagnostic Plots ◽  
Oil Field Development ◽  
Analytical Approaches

Abstract In this paper the simplified way is proposed for predicting the dynamics of liquid production and estimating the parameters of the oil reservoir using diagnostic curves, which are a generalization of analytical approaches, partially compared with the results of calculations on 3D simulation models and with actual well production data.

scholarly journals Estimation of Oil-Water Contact Level Using Different Approaches: A Case Study for an Iraqi Carbonate Reservoir

2020 ◽  
Vol 10 (2) ◽  
pp. 95-113
Author(s):  
Wisam I. Al-Rubaye ◽  
Dhiaa S. Ghanem ◽  
Hussein Mohammed Kh ◽  
Hayder Abdulzahra ◽  
Ali M. Saleem ◽  
...  
Keyword(s):  
Capillary Pressure ◽  
Reservoir Characterization ◽  
Petroleum Industry ◽  
Carbonate Reservoir ◽  
Oil Field ◽  
Accurate Estimation ◽  
Water Contact ◽  
Oil Water ◽  
Original Oil In Place ◽  
Drainage Data

In petroleum industry, an accurate description and estimation of the Oil-Water Contact(OWC) is very important in quantifying the resources (i.e. original oil in place (OIIP)), andoptimizing production techniques, rates and overall management of the reservoir. Thus,OWC accurate estimation is crucial step for optimum reservoir characterization andexploration. This paper presents a comparison of three different methods (i.e. open holewell logging, MDT test and capillary pressure drainage data) to determine the oil watercontact of a carbonate reservoir (Main Mishrif) in an Iraqi oil field "BG”. A total of threewells from "BG" oil field were evaluated by using interactive petrophysics software "IPv3.6". The results show that using the well logging interpretations leads to predict OWCdepth of -3881 mssl. However, it shows variance in the estimated depth (WELL X; -3939,WELL Y; -3844, WELL Z; -3860) mssl, which is considered as an acceptable variationrange due to the fact that OWC height level in reality is not constant and its elevation isusually changed laterally due to the complicated heterogeneity nature of the reservoirs.Furthermore, the results indicate that the MDT test can predict a depth of OWC at -3889mssl, while the capillary drainage data results in a OWC depth of -3879 mssl. The properMDT data and SCAL data are necessary to reduce the uncertainty in the estimationprocess. Accordingly, the best approach for estimating OWC is the combination of MDTand capillary pressure due to the field data obtained are more reliable than open hole welllogs with many measurement uncertainties due to the fact of frequent borehole conditions.

scholarly journals Increasing Waterflood Reserves in the Wilmington Oil Field Through Improved Reservoir Characterization and Reservoir Management

10.2172/1464 ◽  
1998 ◽  
Author(s):  
Chris Phillips ◽  
Dan Moos ◽  
Don Clarke ◽  
John Nguyen ◽  
Kwasi Tagbor ◽  
...  
Keyword(s):  
Reservoir Characterization ◽  
Reservoir Management ◽  
Oil Field

Applications of Artificial Neural Networks for Seismic Facies Classification

2021 ◽  
Vol 73 (02) ◽  
pp. 68-69
Author(s):  
Chris Carpenter
Keyword(s):  
Neural Network ◽  
Seismic Data ◽  
Reservoir Characterization ◽  
Probabilistic Neural Network ◽  
Oil Field ◽  
Seismic Facies ◽  
Data Set ◽  
Full Field ◽  
Facies Classification

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 200577, “Applications of Artificial Neural Networks for Seismic Facies Classification: A Case Study From the Mid-Cretaceous Reservoir in a Supergiant Oil Field,” by Ali Al-Ali, Karl Stephen, SPE, and Asghar Shams, Heriot-Watt University, prepared for the 2020 SPE Europec featured at the 82nd EAGE Conference and Exhibition, originally scheduled to be held in Amsterdam, 1-3 December. The paper has not been peer reviewed. Facies classification using data from sources such as wells and outcrops cannot capture all reservoir characterization in the interwell region. Therefore, as an alternative approach, seismic facies classification schemes are applied to reduce the uncertainties in the reservoir model. In this study, a machine-learning neural network was introduced to predict the lithology required for building a full-field Earth model for carbonate reservoirs in southern Iraq. The work and the methodology provide a significant improvement in facies classification and reveal the capability of a probabilistic neural network technique. Introduction The use of machine learning in seismic facies classification has increased gradually during the past decade in the interpretation of 3D and 4D seismic volumes and reservoir characterization work flows. The complete paper provides a literature review regarding this topic. Previously, seismic reservoir characterization has revealed the heterogeneity of the Mishrif reservoir and its distribution in terms of the pore system and the structural model. However, the main objective of this work is to classify and predict the heterogeneous facies of the carbonate Mishrif reservoir in a giant oil field using a multilayer feed-forward network (MLFN) and a probabilistic neural network (PNN) in nonlinear facies classification techniques. A related objective was to find any domain-specific causal relationships among input and output variables. These two methods have been applied to classify and predict the presence of different facies in Mishrif reservoir rock types. Case Study Reservoir and Data Set Description. The West Qurna field is a giant, multibillion-barrel oil field in the southern Mesopotamian Basin with multiple carbonate and clastic reservoirs. The overall structure of the field is a north/south trending anticline steep on the western flank and gentle on the eastern flank. Many producing reservoirs developed in this oil field; however, the Mid- Cretaceous Mishrif reservoir is the main producing reservoir. The reservoir consists of thick carbonate strata (roughly 250 m) deposited on a shallow water platform adjacent to more-distal, deeper-water nonreservoir carbonate facies developing into three stratigraphic sequence units in the second order. Mishrif facies are characterized by a porosity greater than 20% and large permeability contrast from grainstones to microporosity (10-1000 md). The first full-field 3D seismic data set was achieved over 500 km2 during 2012 and 2013 in order to plan the development of all field reservoirs. A de-tailed description of the reservoir has been determined from well logs and core and seismic data. This study is mainly based on facies log (22 wells) and high-resolution 3D seismic volume to generate seismic attributes as the input data for the training of the neural network model. The model is used to evaluate lithofacies in wells without core data but with appropriate facies logs. Also, testing was carried out in parallel with the core data to verify the results of facies classification.

Sign in / Sign up

Export Citation Format

Share Document