PARTICULATE FORMULATIONS OF ABATE® AND METHOXYCHLOR AS BLACK FLY LARVICIDES: THEIR SELECTIVE EFFECTS ON STREAM FAUNA

1978 ◽  
Vol 110 (6) ◽  
pp. 591-602 ◽  
Author(s):  
B. V. Helson ◽  
A. S. West
Keyword(s):  
Particle Size ◽  
Aerial Application ◽  
Promising Alternative ◽  
Chironomid Larvae ◽  
Black Fly ◽  
Before And After ◽  
Fly Larvae ◽  
And Performance ◽  
Selective Effects

AbstractSeveral streams near Baie Comeau, Quebec were treated with a particulate formulation of methoxychlor (particle size 8–15 μ) or Abate® (particle size 2.5–20 μ) at a dosage of 0.1 ppm for 15 min to determine if such a formulation is effective against and selective for black fly larvae. The effects of these larvicides were evaluated by sampling the stream fauna before and after treatment with cones, Surber samplers, drift nets, and rock sampling. A new caging device, the entrapment sampler, was used to assess mortality directly.Both larvicides were effective against Simuliidae. Neither particulate insecticide was completely selective for black fly larvae, since philopotamid larvae and some chironomid larvae were also killed. Although some other detritus-feeding insects also were affected, numerous families of insects including potential predators of Simuliidae were not affected appreciably by these particulate larvicides. Particulate Abate affected a few more families of insects than particulate methoxychlor. The comparative effects of these formulations and the corresponding liquid formulations on stream fauna are discussed. Particulate formulations are a promising alternative to the present formulations used for black fly larviciding, and further research on their safety and performance and on methods of aerial application is recommended.

THE INFLUENCE OF FORMULATION ON TOXICITY AND AVAILABILITY OF A PESTICIDE (METHOXYCHLOR) TO BLACK FLY LARVAE (DIPTERA: SIMULIIDAE), SOME NON-TARGET AQUATIC INSECTS AND FISH

1981 ◽  
Vol 113 (4) ◽  
pp. 281-293 ◽  
Author(s):  
R. J. Sebastien ◽  
W. L. Lockhart
Keyword(s):  
Aquatic Insects ◽  
Aquatic Organisms ◽  
Filter Feeding ◽  
Chironomid Larvae ◽  
Black Fly ◽  
Fly Larvae

AbstractTwo formulations of methoxychlor were compared with regard to toxicity and availability to aquatic organisms. A particulate formulation was less toxic than an emulsifiable formulation to chironomid larvae, stonefly nymphs, and fish. Similarly the particulate methoxychlor was less rapidly accumulated from water by those same animals than was the emulsified methoxychlor. With black fly larvae, the only filter-feeding animal used, the two formulations were about equal in toxicity, but the particulate formulation was accumulated more readily than emulsified material. Both formulations induced larvae to detach from substrate but emulsifiable methoxychlor acted more quickly. At the time of detachment, larvae exposed to the particulate formulation contained an average of 68 times more methoxychlor than larvae exposed to the emulsion.

scholarly journals Dexamethasone PLGA Microspheres for Sub-Tenon Administration: Influence of Sterilization and Tolerance Studies

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 228
Author(s):  
Deyanira Barbosa-Alfaro ◽  
Vanessa Andrés-Guerrero ◽  
Ivan Fernandez-Bueno ◽  
María Teresa García-Gutiérrez ◽  
Esther Gil-Alegre ◽  
...  
Keyword(s):  
Particle Size ◽  
In Vitro Release ◽  
Intravitreal Injections ◽  
Plga Microspheres ◽  
Promising Alternative ◽  
Before And After ◽  
Evaporation Technique ◽  
Release Profiles

Many diseases affecting the posterior segment of the eye require repeated intravitreal injections with corticosteroids in chronic treatments. The periocular administration is a less invasive route attracting considerable attention for long-term therapies. In the present work, dexamethasone-loaded poly(lactic-co-glycolic) acid (PLGA) microspheres (Dx-MS) were prepared using the oil-in-water (O/W) emulsion solvent evaporation technique. MS were characterized in terms of mean particle size and particle size distribution, external morphology, polymer integrity, drug content, and in vitro release profiles. MS were sterilized by gamma irradiation (25 kGy), and dexamethasone release profiles from sterilized and non-sterilized microspheres were compared by means of the similarity factor (f2). The mechanism of drug release before and after irradiation exposure of Dx-MS was identified using appropriate mathematical models. Dexamethasone release was sustained in vitro for 9 weeks. The evaluation of the in vivo tolerance was carried out in rabbit eyes, which received a sub-Tenon injection of 5 mg of sterilized Dx-MS (20–53 µm size containing 165.6 ± 3.6 µg Dx/mg MS) equivalent to 828 µg of Dx. No detectable increase in intraocular pressure was reported, and clinical and histological analysis of the ocular tissues showed no adverse events up to 6 weeks after the administration. According to the data presented in this work, the sub-Tenon administration of Dx-MS could be a promising alternative to successive intravitreal injections for the treatment of chronic diseases of the back of the eye.

Development and Ex-vivo Evaluation of Topiramate Mucoadhesive Nanoparticles for Intranasal Delivery

2020 ◽  
Vol 13 (6) ◽  
pp. 5250-5255
Author(s):  
Ashwin Kumar Tulasi ◽  
Anil Goud Kandhula ◽  
Ravi Krishna Velupula
Keyword(s):  
Particle Size ◽  
Nasal Mucosa ◽  
Intranasal Administration ◽  
Ex Vivo ◽  
Chemical Properties ◽  
Brain Targeting ◽  
Oral Tablet ◽  
Promising Alternative ◽  
Ex Vivo Permeation

Topiramate is a second-generation antiepileptic drug used in partial, generalized seizures as an oral tablet. Oral route of administration is most convenient but shows delayed absorption. Moreover, in emergency cases, parenteral administration is not possible as it requires medical assistance. Hence, the present study was aimed to develop topiramate mucoadhesive nanoparticles for intranasal administration using ionotropic gelation method. The developed nanoparticles were evaluated for physico-chemical properties like particle size, zeta potential, surface morphology, drug content, entrapment efficiency, in vitro drug release, mucoadhesive strength, and ex vivo permeation studies in excised porcine nasal mucosa. Optimized nanoparticle formulation (T9) was composed oil mucoadhesive agent (Chitosan 1% w/w), cross linking polymer (TPP) and topiramate 275mg, 100mg and 4% respectively. It showed particle size of 350nm, high encapsulation efficacy and strong mucoadhesive strength. In vitro drug diffusion of optimized formulation showed 95.12% release of drug after 180min. Ex-vivo permeation of drug across nasal mucosa was   88.05 % after 180min. Nasocilial toxicity studies showed optimized formulation did not damage the nasal mucosa. Thus, the intranasal administration of topiramate using chitosan can be a promising alternative for brain targeting and the treatment of epilepsy.

scholarly journals Effects of cooled floor pads combined with chilled drinking water on behavior and performance of lactating sows under heat stress

2021 ◽  
Vol 99 (3) ◽  
Author(s):  
Y Zhu ◽  
L J Johnston ◽  
M H Reese ◽  
E S Buchanan ◽  
J E Tallaksen ◽  
...  
Keyword(s):  
Drinking Water ◽  
Heat Stress ◽  
Respiration Rate ◽  
Rectal Temperature ◽  
Time Budget ◽  
Video Recording ◽  
Lactating Sows ◽  
Before And After ◽  
And Performance ◽  
Drinking Frequency

Abstract This study was conducted to evaluate whether cooled floor pads combined with chilled drinking water could alleviate negative impacts of heat stress on lactating sows. Thirty sows (Landrace × Yorkshire, Parity = 1 to 6) were housed in individual farrowing stalls in two rooms with temperatures being controlled at 29.4°C (0700–1900 hours) and 23.9°C (1900–0700 hours). Sows in one room (Cool), but not in the other room (Control) were provided cooled floor pads (21–22°C) and chilled drinking water (13–15°C). Behavior of sows (15 sows/treatment) was video recorded during farrowing, and days 1, 3, 7, 14, and 21 after farrowing. Videos were viewed continuously to register the birth time of each piglet, from which total farrowing duration and birth intervals were calculated. The number of drinking bouts and the duration of each drinking bout were registered for each sow through viewing videos continuously for 2 h (1530–1730 hours) each video-recording day. Postures (lying laterally, lying ventrally, sitting, and standing) were recorded by scanning video recordings at 5-min intervals for 24 h each video-recording day, and time budget for each posture was calculated. Rectal temperature and respiration rate were measured for all sows the day before and after farrowing, and then once weekly. Sow and litter performance was recorded. Data were analyzed using the Glimmix procedure of SAS. The cooling treatment did not affect sow behavior or litter performance. Sows in the Cool room had lower rectal temperature (P = 0.03) and lower respiration rate (P < 0.001), consumed more feed (P = 0.03), tended to have reduced weight loss (P = 0.07), and backfat loss (P = 0.07) during lactation than sows in the Control room. As lactation progressed, sows increased drinking frequency (P < 0.001) and time spent lying ventrally (P < 0.0001), standing (P < 0.001), and sitting (P < 0.0001), and decreased time spent lying laterally (P < 0.0001) in both Cool and Control rooms. While cooled floor pads combined with chilled drinking water did not affect sow behavior, they did alleviate heat stress partially, as indicated by decreased rectal temperature, respiration rate, weight, and backfat loss, and increased feed intake in lactating sows.

scholarly journals Effects of Feeding Time on Markers of Muscle Metabolic Flexibility Following Acute Aerobic Exercise in Trained Mice Undergoing Time Restricted Feeding

Nutrients ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 1717
Author(s):  
Aaron Persinger ◽  
Matthew Butawan ◽  
Martina Faietti ◽  
Ashley Pryke ◽  
Kyley Rose ◽  
...  
Keyword(s):  
Exercise Training ◽  
Performance Outcomes ◽  
Metabolic Flexibility ◽  
Feeding Time ◽  
Restricted Feeding ◽  
Physically Active ◽  
Impact Performance ◽  
Before And After ◽  
And Performance ◽  
Access To Food

Time-restricted feeding (TRF) is becoming a popular way of eating in physically active populations, despite a lack of research on metabolic and performance outcomes as they relate to the timing of food consumption in relation to the time of exercise. The purpose of this study was to determine if the timing of feeding/fasting after exercise training differently affects muscle metabolic flexibility and response to an acute bout of exercise. Male C57BL/6 mice were randomized to one of three groups for 8 weeks. The control had ad libitum access to food before and after exercise training. TRF-immediate had immediate access to food for 6 h following exercise training and the TRF-delayed group had access to food 5-h post exercise for 6 h. The timing of fasting did not impact performance in a run to fatigue despite TRF groups having lower hindlimb muscle mass. TRF-delayed had lower levels of muscle HSL mRNA expression and lower levels of PGC-1α expression but displayed no changes in electron transport chain enzymes. These results suggest that in young populations consuming a healthy diet and exercising, the timing of fasting may not substantially impact metabolic flexibility and running performance.

Effect of particle size and delignification on the rate of digestion of hemicellulose and cellulose by cellulase in mature pangola grass stems

1983 ◽  
Vol 34 (3) ◽  
pp. 241 ◽  
Author(s):  
CW Ford
Keyword(s):  
Particle Size ◽  
Cell Walls ◽  
Trichoderma Viride ◽  
Structural Features ◽  
Cell Wall Polysaccharides ◽  
Particle Size Reduction ◽  
Digitaria Decumbens ◽  
Hemicellulose Degradation ◽  
Before And After ◽  
The Difference

Stem cell walls of pangola grass (Digitaria decumbens) were ground to two particle sizes (c. 1 and 0.1 mm diameter), and incubated with cellulase (ex. Trichoderma viride) for varying times before and after delignification. Total cell walls finely ground (0.1 mm) with a Spex Shatterbox mill were initially degraded more rapidly (to 24 h) than delignified 1 mm particles. Thereafter the delignified material was solubilized to a greater extent. Subsequent specific determinations of cell wall polysaccharides indicated that delignification increased the rate of hemicellulose degradation to a greater extent than did particle size reduction, whereas the opposite was found for cellulose. The difference between delignified and Spex-ground residues, in terms of the amount of polysaccharide digested, was much greater for cellulose than hemicellulose. It is concluded that structural features play a more important role in limiting cellulase degradation of cellulose than does association with lignin, the reverse being so for hemicellulose.

scholarly journals Cost-Effectiveness of Black Soldier Fly Larvae Meal as Substitute of Fishmeal in Diets for Layer Chicks and Growers

2021 ◽  
Vol 13 (11) ◽  
pp. 6074
Author(s):  
Esther Khayanga Sumbule ◽  
Mary Kivali Ambula ◽  
Isaac Maina Osuga ◽  
Janice Ghemoh Changeh ◽  
David Miano Mwangi ◽  
...  
Keyword(s):  
Weight Gain ◽  
Live Weight ◽  
Daily Weight Gain ◽  
Feed Conversion ◽  
Alternative Source ◽  
Black Soldier Fly ◽  
Promising Alternative ◽  
Black Soldier Fly Larvae ◽  
Fly Larvae ◽  
The Impact

The acceptance of eco-friendly black soldier fly larvae meal (BSFLM) as sustainable alternative protein ingredient in poultry feeds continues to gain momentum worldwide. This study evaluates the impact of BSFLM in layer chick and grower diets on the growth, carcass quality and economic returns. Mean weekly weight gain and total live weight per chick and grower varied significantly. The highest final weight gain was achieved when birds were provided diet with 25.6% BSFLM. Average daily feed intake (ADFI), average daily weight gain (ADG) and overall weight gain of the chick varied significantly, except for the feed conversion ratio (FCR). For grower birds, ADFI, ADG, FCR and overall weight gain did not vary significantly across the various feeding regimes. The weight of the wings and drumsticks had a quadratic response with a maximum weight obtained at 33% inclusion of BSFLM. The weight of the internal organs were not significantly affected by dietary types. Positive cost–benefit ratio and return on investment was recorded for diet types with higher BSFLM inclusion levels (>75%). Diets with 25% and 100% BSFLM inclusion were the most suitable and cost-effective, respectively. Thus, BSFLM represents a promising alternative source of protein that could be sustainably used in the poultry industries.

scholarly journals Identification of abnormal tribological regimes using a microphone and semi-supervised machine-learning algorithm

Friction ◽  
2021 ◽  
Author(s):  
Vigneashwara Pandiyan ◽  
Josef Prost ◽  
Georg Vorlaufer ◽  
Markus Varga ◽  
Kilian Wasmer
Keyword(s):  
Machine Learning ◽  
Learning Algorithm ◽  
Industrial Applications ◽  
Supervised Machine Learning ◽  
Normal Operation ◽  
Promising Alternative ◽  
Wear And Tear ◽  
Validation Procedure ◽  
And Performance

AbstractFunctional surfaces in relative contact and motion are prone to wear and tear, resulting in loss of efficiency and performance of the workpieces/machines. Wear occurs in the form of adhesion, abrasion, scuffing, galling, and scoring between contacts. However, the rate of the wear phenomenon depends primarily on the physical properties and the surrounding environment. Monitoring the integrity of surfaces by offline inspections leads to significant wasted machine time. A potential alternate option to offline inspection currently practiced in industries is the analysis of sensors signatures capable of capturing the wear state and correlating it with the wear phenomenon, followed by in situ classification using a state-of-the-art machine learning (ML) algorithm. Though this technique is better than offline inspection, it possesses inherent disadvantages for training the ML models. Ideally, supervised training of ML models requires the datasets considered for the classification to be of equal weightage to avoid biasing. The collection of such a dataset is very cumbersome and expensive in practice, as in real industrial applications, the malfunction period is minimal compared to normal operation. Furthermore, classification models would not classify new wear phenomena from the normal regime if they are unfamiliar. As a promising alternative, in this work, we propose a methodology able to differentiate the abnormal regimes, i.e., wear phenomenon regimes, from the normal regime. This is carried out by familiarizing the ML algorithms only with the distribution of the acoustic emission (AE) signals captured using a microphone related to the normal regime. As a result, the ML algorithms would be able to detect whether some overlaps exist with the learnt distributions when a new, unseen signal arrives. To achieve this goal, a generative convolutional neural network (CNN) architecture based on variational auto encoder (VAE) is built and trained. During the validation procedure of the proposed CNN architectures, we were capable of identifying acoustics signals corresponding to the normal and abnormal wear regime with an accuracy of 97% and 80%. Hence, our approach shows very promising results for in situ and real-time condition monitoring or even wear prediction in tribological applications.

Twenty Years After the Hype

2015 ◽  
Vol 2 (2) ◽  
pp. 1-21 ◽  
Author(s):  
Alois Paulin
Keyword(s):  
Performance Indicators ◽  
The State ◽  
Government Performance ◽  
Before And After ◽  
To Come ◽  
And Performance ◽  
Government Reforms

In this study the authors analyze the effects of e-government reforms that began in mid-90ies by confronting the promises which these reforms made to government performance in the period before and after the reforms took place. The authors use fiscal and performance indicators of the Slovenian government and courts to argue that e-government did not yield any notable effects on the state performance. Finally, the authors analyze the reasons why e-government technology cannot be regarded as sustainable and suggest a different approach towards researching how to sustainably improve governance for generations to come.

Sign in / Sign up

Export Citation Format

Share Document