Micro-Tremor Data Analysis for Site Response Studies of Srinagar, Garhwal (India)

2019 ◽  
Vol 10 (2) ◽  
pp. 69-83
Author(s):  
Pradeep Kumar Singh Chauhan ◽  
Abha Mittal ◽  
Gayatri Devi ◽  
Anirudh Singh
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Soft Soil ◽  
Seismic Hazard Assessment ◽  
Vulnerability Index ◽  
Earthquake Ground Motion ◽  
Seismic Zone ◽  
Noise Data ◽  
Thick Overburden ◽  
The City

Site response studies using micro-tremor or ambient noise data are one of the well-known tools of seismic hazard assessment and microzonation. Different soil types behave differently for the same ground motion - some amplify it and some do not. It is well-accepted that, besides the earthquake magnitude and epicenter distance, local geology exerts significant influence on earthquake ground motion at a given location. In general, soft soil and thick overburden amplify the ground motion. Micro-tremor data provides an important input in seismic microzonation studies. Srinagar (Garhwal Himalaya), the largest growing city of Uttarakhand, India, lies in seismic zone V and has long seismic history. The micro-tremor data using Altus K2SMA has been collected from 47 locations in different parts of the city. The city has been divided into three zones on the basis of natural frequency (Nf). The most part of the city lies in zone 1. The central part of the city has a share of rest zones i.e. II and III. Vulnerability index has been also computed and found in the range from 1–236.

scholarly journals A review on the multi-criteria seismic hazard analysis of Ethiopia: with implications of infrastructural development

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Alemayehu Ayele ◽  
Kifle Woldearegay ◽  
Matebie Meten
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Active Fault ◽  
Site Response ◽  
Seismic Hazard Assessment ◽  
Earthquake Ground Motion ◽  
Response Analysis ◽  
Ethiopian Rift ◽  
Rift System ◽  
Main Ethiopian Rift

AbstractEarthquake is a sudden release of energy due to faults. Natural calamities like earthquakes can neither be predicted nor prevented. However, the severity of the damages can be minimized by development of proper infrastructure which includes microzonation studies, appropriate construction procedures and earthquake resistant designs. The earthquake damaging effect depends on the source, path and site conditions. The earthquake ground motion is affected by topography (slope, hill, valley, canyon, ridge and basin effects), groundwater and surface hydrology. The seismic hazard damages are ground shaking, structural damage, retaining structure failures and lifeline hazards. The medium to large earthquake magnitude (< 6) reported in Ethiopia are controlled by the main Ethiopian rift System. The spatial and temporal variation of earthquake ground motion should be addressed using the following systematic methodology. The general approaches used to analyze damage of earthquake ground motions are probabilistic seismic hazard assessment (PSHA), deterministic seismic hazard assessment (DSHA) and dynamic site response analysis. PSHA considers all the scenarios of magnitude, distance and site conditions to estimate the intensity of ground motion distribution. Conversely, DSHA taken into account the worst case scenarios or maximum credible earthquake to estimate the intensity of seismic ground motion distribution. Furthermore, to design critical infrastructures, DSHA is more valuable than PSHA. The DSHA and PSHA ground motion distributions are estimated as a function of earthquake magnitude and distance using ground motion prediction equations (GMPEs) at top of the bedrock. Site response analysis performed to estimate the ground motion distributions at ground surface using dynamic properties of the soils such as shear wave velocity, density, modulus reduction, and material damping curves. Seismic hazard evaluation of Ethiopia shown that (i) amplification is occurred in the main Ethiopian Rift due to thick soil, (ii) the probability of earthquake recurrence due to active fault sources. The situation of active fault is oriented in the N-S direction. Ethiopia is involved in huge infrastructural development (including roads, industrial parks and railways), increasing population and agricultural activity in the main Ethiopian Rift system. In this activity, socio-economic development, earthquake and earthquake-generated ground failures need to be given attention in order to reduce losses from seismic hazards and create safe geo-environment.

scholarly journals A hybrid model for mapping simplified seismic response via a GIS-metamodel approach

2014 ◽  
Vol 14 (7) ◽  
pp. 1703-1718 ◽  
Author(s):  
G. Grelle ◽  
L. Bonito ◽  
P. Revellino ◽  
L. Guerriero ◽  
F. M. Guadagno
Keyword(s):  
Seismic Hazard ◽  
Seismic Response ◽  
Hybrid Model ◽  
Computational Models ◽  
Site Response ◽  
Seismic Hazard Assessment ◽  
Physical Parameters ◽  
Seismic Zone ◽  
Acceleration Response ◽  
Good Correspondence

Abstract. In earthquake-prone areas, site seismic response due to lithostratigraphic sequence plays a key role in seismic hazard assessment. A hybrid model, consisting of GIS and metamodel (model of model) procedures, was introduced aimed at estimating the 1-D spatial seismic site response in accordance with spatial variability of sediment parameters. Inputs and outputs are provided and processed by means of an appropriate GIS model, named GIS Cubic Model (GCM). This consists of a block-layered parametric structure aimed at resolving a predicted metamodel by means of pixel to pixel vertical computing. The metamodel, opportunely calibrated, is able to emulate the classic shape of the spectral acceleration response in relation to the main physical parameters that characterize the spectrum itself. Therefore, via the GCM structure and the metamodel, the hybrid model provides maps of normalized acceleration response spectra. The hybrid model was applied and tested on the built-up area of the San Giorgio del Sannio village, located in a high-risk seismic zone of southern Italy. Efficiency tests showed a good correspondence between the spectral values resulting from the proposed approach and the 1-D physical computational models. Supported by lithology and geophysical data and corresponding accurate interpretation regarding modelling, the hybrid model can be an efficient tool in assessing urban planning seismic hazard/risk.

scholarly journals The effect of seismic base isolation on structural response of a 12-story hotel building in Padang, Indonesia

2020 ◽  
Vol 156 ◽  
pp. 05026
Author(s):  
Fauzan ◽  
Afdhalul Ihsan ◽  
Mutia Putri Monika ◽  
Zev Al Jauhari
Keyword(s):  
Base Isolation ◽  
Response Spectrum ◽  
Soft Soil ◽  
Structural Response ◽  
Time History ◽  
Seismic Zone ◽  
Isolation System ◽  
Rubber Bearing ◽  
Seismic Base Isolation ◽  
The City

The amount of potential investment in Padang City, Indonesia since 2017 attracted many investors to contribute to the city. One of the investments is a 12-story hotel that will be constructed in By Pass Street of the city. The hotel is located in a high seismic zone area, so the seismic base isolation has been proposed to be used in the hotel building. The main aim of using a seismic base isolation device is to reduce the inertia forces introduced in the structure due to earthquakes by shifting the fundamental period of the structure out of dangerous resonance range and concentration of the deformation demand at the isolation system. An analytical study on the Reinforced Concrete (RC) hotel building with and without rubber bearing (RB) base isolation is carried out using the response spectrum and time history analysis methods. The results show that internal forces and inter-story drift of the building with high damping rubber bearing (HDRB) are lower than that of the fixed base with a remarkable margin. From this study, it is recommended to use the HDRB base isolation for medium and high rise buildings with soft soil in Padang City, Indonesia.

Earthquake Ground Motion Scenarios for the City of Ruse

2021 ◽  
pp. 243-262
Author(s):  
Dimcho Solakov ◽  
Stela Simeonova ◽  
Plamena Raykova ◽  
Boyko Rangelov ◽  
Constantin Ionescu
Keyword(s):  
Ground Motion ◽  
Earthquake Ground Motion ◽  
Ground Motion Scenarios ◽  
The City

scholarly journals Regional-Scale 3D Ground-Motion Simulations of Mw 7 Earthquakes on the Hayward Fault, Northern California Resolving Frequencies 0–10 Hz and Including Site-Response Corrections

2020 ◽  
Vol 110 (6) ◽  
pp. 2862-2881
Author(s):  
Arthur J. Rodgers ◽  
Arben Pitarka ◽  
Ramesh Pankajakshan ◽  
Bjorn Sjögreen ◽  
N. Anders Petersson
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Regional Scale ◽  
Frequency Resolution ◽  
Earthquake Ground Motion ◽  
Northern California ◽  
Soft Soils ◽  
Near Surface ◽  
Ground Motion Simulations ◽  
Scenario Earthquakes

ABSTRACT Large earthquake ground-motion simulations in 3D Earth models provide constraints on site-specific shaking intensities but have suffered from limited frequency resolution and ignored site response in soft soils. We report new regional-scale 3D simulations for moment magnitude 7.0 scenario earthquakes on the Hayward Fault, northern California with SW4. Simulations resolved significantly broader band frequencies (0–10 Hz) than previous studies and represent the highest resolution simulations for any such earthquake to date. Seismic waves were excited by a kinematic rupture following Graves and Pitarka (2016) and obeyed wave propagation in a 3D Earth model with topography from the U.S. Geological Survey (USGS) assuming a minimum shear wavespeed, VSmin, of 500  m/s. We corrected motions for linear and nonlinear site response for the shear wavespeed, VS, from the USGS 3D model, using a recently developed ground-motion model (GMM) for Fourier amplitude spectra (Bayless and Abrahamson, 2018, 2019a). At soft soil locations subjected to strong shaking, the site-corrected intensities reflect the competing effects of linear amplification by low VS material, reduction of stiffness during nonlinear deformation, and damping of high frequencies. Sites with near-surface VS of 500  m/s or greater require no linear site correction but can experience amplitude reduction due to nonlinear response. Averaged over all sites, we obtained reasonable agreement with empirical ergodic median GMMs currently used for seismic hazard and design ground motions (epsilon less than 1), with marked improvement at soft sedimentary sites. At specific locations, the simulated shaking intensities show systematic differences from the GMMs that reveal path and site effects not captured in these ergodic models. Results suggest how next generation regional-scale earthquake simulations can provide higher spatial and frequency resolution while including effects of soft soils that are commonly ignored in scenario earthquake ground-motion simulations.

scholarly journals Neo-deterministic seismic hazard assessment of Corsica-Sardinia block

2021 ◽  
Author(s):  
Enrico Brandmayr ◽  
Franco Vaccari ◽  
Giuliano Francesco Panza
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Hazard Assessment ◽  
Seismic Hazard Assessment ◽  
Earthquake Ground Motion ◽  
Earthquake Catalog ◽  
Hazard Maps ◽  
Source Information ◽  
Deterministic Seismic Hazard ◽  
Seismogenic Nodes

AbstractThe Corsica-Sardinia lithospheric block is commonly considered as a region of very low seismicity and the scarce reported seismicity for the area has till now precluded the reliable assessment of its seismic hazard. The time-honored assumption has been recently questioned and the historical seismicity of Sardinia has been reevaluated. Even more, several seismogenic nodes capable of M5 + have been recognized in the Corsica-Sardinia block exploiting the morphostructural zonation technique, calibrated to earlier results obtained for the Iberian peninsula, which has structural lithospheric affinities with the Corsica-Sardinia block. All this allows now for the computation of reliable earthquake hazard maps at bedrock conditions exploiting the power of Neo Deterministic Seismic Hazard Assessment (NDSHA) evaluation. NDSHA relies upon the fundamental physics of wave generation and propagation in complex geologic structures and generates realistic time series from which several earthquake ground motion parameters can be readily extracted. NDSHA exploits in an optimized way all the available knowledge about lithospheric mechanical parameters, seismic history, seismogenic zones and nodes. In accordance with continuum mechanics, the tensor nature of earthquake ground motion is preserved computing realistic signals using structural models obtained by tomographic inversion and earthquake source information readily available in literature. The way to this approach has been open by studies focused on continental Italy and Sicily, where the agreement between hazard maps obtained using seismogenic zones, informed by earthquake catalog data, and the maps obtained using only seismogenic nodes are very good.

scholarly journals Neo-deterministic seismic hazard maps of Kosovo

2021 ◽  
Author(s):  
Enrico Brandmayr ◽  
Vaccari Franco ◽  
Romanelli Fabio ◽  
Vlahovic Gordana ◽  
Panza Giuliano Francesco
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Seismic Hazard Assessment ◽  
Active Regions ◽  
Earthquake Hazard ◽  
Earthquake Ground Motion ◽  
Hazard Maps ◽  
Source Information ◽  
Deterministic Seismic Hazard ◽  
Traditional Construction

Kosovo is one of the most seismically active regions in Europe, lying within the Alpine-Mediterranean tectonic belt. Historical records for the region show several catastrophic earthquakes with epicentral intensity IX (MCS). However, due to Kosovo’s high population density, high prevalence of traditional construction, and insufficient enforcement of building codes, Kosovo is vulnerable to earthquake damage. In this study, we present earthquake hazard maps for bedrock conditions in Kosovo based on the well-known Neo-deterministic Seismic Hazard Assessment (NDSHA) method. NDSHA relies upon the fundamental physics of wave generation and propagation in complex geologic structures to generate realistic time series, used as input for the computation of several ground motion parameters, integrating the available knowledge of seismic history, seismogenic zones and morphostructural nodes. In accordance with continuum mechanics, the tensor nature of earthquake ground motion is preserved, producing realistic signals using structural models obtained by tomographic inversion and earthquake source information readily available in literature. Our maps are generally consistent with the observed intensity IX (MCS) and suggest that, in some instances, intensity X could be reached.

From Ergodic to Region- and Site-Specific Probabilistic Seismic Hazard Assessment: Method Development and Application at European and Middle Eastern Sites

2017 ◽  
Vol 33 (4) ◽  
pp. 1433-1453 ◽  
Author(s):  
Sreeram Reddy Kotha ◽  
Dino Bindi ◽  
Fabrice Cotton
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Hazard Assessment ◽  
Method Development ◽  
Site Response ◽  
Seismic Hazard Assessment ◽  
Probabilistic Seismic Hazard Assessment ◽  
Probabilistic Seismic Hazard ◽  
Site Specific ◽  
Aleatory Variability

The increasing numbers of recordings at individual sites allows quantification of empirical linear site-response adjustment factors ( δS2 S s) from the ground motion prediction equation (GMPE) residuals. The δS2 S s are then used to linearly scale the ergodic GMPE predictions to obtain site-specific ground motion predictions in a partially non-ergodic Probabilistic Seismic Hazard Assessment (PSHA). To address key statistical and conceptual issues in the current practice, we introduce a novel empirical region- and site-specific PSHA methodology wherein, (1) site-to-site variability ( φ S2 S) is first estimated as a random-variance in a mixed-effects GMPE regression, (2) δS2 S s at new sites with strong motion are estimated using the a priori φ S2 S, and (3) the GMPE site-specific single-site aleatory variability σ ss,s is replaced with a generic site-corrected aleatory variability σ0. Comparison of region- and site-specific hazard curves from our method against the traditional ergodic estimates at 225 sites in Europe and Middle East shows an approximate 50% difference in predicted ground motions over a range of hazard levels—a strong motivation to increase seismological monitoring of critical facilities and enrich regional ground motion data sets.

An approach to construct a Netherlands-wide ground-motion amplification model

2021 ◽  
Author(s):  
Janneke van Ginkel ◽  
Elmer Ruigrok ◽  
Rien Herber
Keyword(s):  
The Netherlands ◽  
Ground Motion ◽  
Seismic Wave ◽  
Transfer Functions ◽  
Site Response ◽  
Data Availability ◽  
Earthquake Ground Motion ◽  
Sediment Layer ◽  
Small Magnitude ◽  
Near Surface

&lt;p&gt;Local site conditions can strongly influence the level of amplification of ground-motion at the surface during an earthquake. Especially near-surface low velocity sediments overlying stiffer seismic bedrock modify earthquake ground motions in terms of amplitudes and frequency content, the so-called site response. Earthquake ground-motion site response is of great concern because it can lead to amplified surface shaking resulting in significant damage on structures despite small magnitude events. The Netherlands has tectonically related seismic activity in the southern region with magnitudes up to 5.8 measured so far. In addition, gas extraction in the Groningen field in the northern part of the Netherlands, is regularly causing shallow (3 km), low magnitude (Mw max= 3.6), induced earthquakes. The shallow geology of the Netherlands consists of a very heterogeneous soft sediment cover, which has a strong effect on seismic wave propagation and in particular on the amplitude of ground shaking.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;The ambient seismic field and local earthquakes recorded over 69 borehole stations in Groningen are used to define relationships between the subsurface lithological composition, measured shear-wave velocity profiles, horizontal-to-vertical spectral ratios (HVSR) and empirical transfer functions (ETF). For the Groningen region we show that the HVSR matches the ETF well and conclude that the HVSR can be used as a first proxy for earthquake site-response. In addition, based on the ETFs we observe that most of the seismic wave amplification occurs in the top 50 m of the much thicker sediment layer. Here, a velocity contrast is present between the very soft Holocene clays and peat on top of the stiffer Pleistocene sands.&lt;/p&gt;&lt;p&gt;&amp;#160;&lt;/p&gt;&lt;p&gt;Based on the learnings from Groningen we first constructed sediment type classes for the Dutch subsurface, each class representing a level of expected amplification. Secondly, the HVSR curves are estimated for all surface seismometers in the Netherlands seismic network and a sediment class is assigned to each location. Highest HVSR peak amplitudes are measured at sites with the highest level of amplification of the sediment classification. Based on this correlation and the presence of a detailed shallow geological model at most sites in the Netherlands, a simplistic approach is presented to predict amplification at any location with sufficient lithologic information. With this approach based on the shallow sediment composition, we can obtain constraints on the seismic hazard in areas that have limited data availability but have potential risk of seismicity, for example due to geothermal energy extraction.&lt;/p&gt;

Ground-response maps for Tonopah, Nevada

1978 ◽  
Vol 68 (2) ◽  
pp. 451-469
Author(s):  
Walter W. Hays
Keyword(s):  
Ground Motion ◽  
Test Site ◽  
Earthquake Ground Motion ◽  
Nevada Test Site ◽  
Ground Response ◽  
Period Range ◽  
Ground Shaking ◽  
Motion Data ◽  
The City ◽  
Made In

Abstract Ground-response maps for Tonopah, Nevada, were prepared using ground-motion data from a Nevada Test Site explosion recorded on a 12-station seismic array in Tonopah. These data were used to define 10 frequency-dependent ground-response maps for the period range 0.05 to 2.5 sec. These data were combined with the probabilistic calculation of earthquake ground accelerations on rock sites in the Tonopah area, made in a 1976 study by S. T. Algermissen and D. M. Perkins, in order to give estimates of the ground shaking expected throughout the city in a 50-yr period of time, at the 90 per cent probability level. Although these relative ground-response estimates are based on low-strain data, they provide a preliminary basis for delineating geographic areas with different susceptibilities to earthquake ground shaking until the time that high-strain earthquake ground-motion measurements become available in Tonopah.

Sign in / Sign up

Export Citation Format

Share Document