scholarly journals Effect of a self-etching primer and phosphoric acid etching on the bond strength of 4-META/MMA-TBB resin to human enamel

2015 ◽  
Vol 34 (2) ◽  
pp. 219-226 ◽  
Author(s):  
Hiroshi NOGAWA ◽  
Hiroyasu KOIZUMI ◽  
Osamu SAIKI ◽  
Haruto HIRABA ◽  
Mitsuo NAKAMURA ◽  
...  
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Acid Etching ◽  
Human Enamel ◽  
Phosphoric Acid Etching

scholarly journals Four chemical methods of porcelain conditioning and their influence over bond strength and surface integrity

2015 ◽  
Vol 20 (4) ◽  
pp. 51-56 ◽  
Author(s):  
João Paulo Fragomeni Stella ◽  
Andrea Becker Oliveira ◽  
Lincoln Issamu Nojima ◽  
Mariana Marquezan
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Surface Integrity ◽  
Hydrofluoric Acid ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Acid Etching ◽  
Ceramic Surface ◽  
Surface Conditioning ◽  
Phosphoric Acid Etching

OBJECTIVE: To assess four different chemical surface conditioning methods for ceramic material before bracket bonding, and their impact on shear bond strength and surface integrity at debonding.METHODS: Four experimental groups (n = 13) were set up according to the ceramic conditioning method: G1 = 37% phosphoric acid etching followed by silane application; G2 = 37% liquid phosphoric acid etching, no rinsing, followed by silane application; G3 = 10% hydrofluoric acid etching alone; and G4 = 10% hydrofluoric acid etching followed by silane application. After surface conditioning, metal brackets were bonded to porcelain by means of the Transbond XP system (3M Unitek). Samples were submitted to shear bond strength tests in a universal testing machine and the surfaces were later assessed with a microscope under 8 X magnification. ANOVA/Tukey tests were performed to establish the difference between groups (α= 5%).RESULTS: The highest shear bond strength values were found in groups G3 and G4 (22.01 ± 2.15 MPa and 22.83 ± 3.32 Mpa, respectively), followed by G1 (16.42 ± 3.61 MPa) and G2 (9.29 ± 1.95 MPa). As regards surface evaluation after bracket debonding, the use of liquid phosphoric acid followed by silane application (G2) produced the least damage to porcelain. When hydrofluoric acid and silane were applied, the risk of ceramic fracture increased.CONCLUSIONS: Acceptable levels of bond strength for clinical use were reached by all methods tested; however, liquid phosphoric acid etching followed by silane application (G2) resulted in the least damage to the ceramic surface.

scholarly journals Effect of Over-Etching and Prolonged Application Time of a Universal Adhesive on Dentin Bond Strength

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2902
Author(s):  
Phoebe Burrer ◽  
Hoang Dang ◽  
Matej Par ◽  
Thomas Attin ◽  
Tobias T. Tauböck
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Linear Regression Analysis ◽  
Acid Etching ◽  
Control Group ◽  
Application Time ◽  
Universal Adhesive ◽  
Adhesive Application ◽  
Post Hoc ◽  
Phosphoric Acid Etching

This study investigated the effect of over-etching and prolonged application time of a universal adhesive on dentin bond strength. Ninety extracted human molars were ground to dentin and randomly allocated into nine groups (G1–9; n = 10 per group), according to the following acid etching and adhesive application times. In the control group (G1), phosphoric acid etching was performed for 15 s followed by application of the universal adhesive Scotchbond Universal (3M) for 20 s, as per manufacturer’s instructions. In groups G2–5, both the etching and adhesive application times were either halved, doubled, quadrupled, or increased eightfold. In groups G6–9, etching times remained the same as in G2–5 (7.5 s, 30 s, 60 s, and 120 s, respectively), but the adhesive application time was set at 20 s as in the control group (G1). Specimens were then restored with a nanofilled composite material and subjected to microtensile bond strength testing. Bond strength data were statistically analyzed by ANOVA and Tukey’s post-hoc tests (α = 0.05). The relationship of bond strength with etching and adhesive application time was examined using linear regression analysis. Treatment of dentin with halved phosphoric acid etching and adhesive application times (G2) resulted in a significant bond strength decrease compared to the control group (G1) and all other test groups, including the group with halved acid etching, but 20 s of adhesive application time (G6). No significant differences in bond strength were found for groups with multiplied etching times and an adhesive application time of 20 s or more, when compared to the control group (G1). In conclusion, a universal adhesive application time of at least 20 s is recommended when bonding to over-etched dentin.

Effects of Pulsed Nd:YAG Laser on Tensile Bond Strength and Caries Resistance of Human Enamel

2014 ◽  
Vol 39 (3) ◽  
pp. 273-282 ◽  
Author(s):  
X Wen ◽  
L Zhang ◽  
R Liu ◽  
M Deng ◽  
Y Wang ◽  
...  
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Nd:Yag Laser ◽  
Acid Resistance ◽  
Enamel Surface ◽  
Acid Etching ◽  
Laser Parameter ◽  
Pulsed Nd:Yag Laser ◽  
Resistance Evaluation ◽  
Human Enamel

SUMMARY This study aims to evaluate the effects of pulsed Nd:YAG laser on the tensile bond strength (TBS) of resin to human enamel and caries resistance of human enamel. A total of 201 human premolars were used in this in vitro study. A flat enamel surface greater than 4 × 4 mm in area was prepared on each specimen using a low-speed cutting machine under a water coolant. Twenty-one specimens were divided into seven groups for morphology observations with no treatment, 35% phosphoric acid etching (30 seconds), and laser irradiation (30 seconds) of pulsed Nd:YAG laser with five different laser-parameter combinations. Another 100 specimens were used for TBS testing. They were embedded in self-cured acrylic resin and randomly divided into 10 groups. After enamel surface pretreatments according to the group design, resin was applied. The TBS values were tested using a universal testing machine. The other 80 specimens were randomly divided into eight groups for acid resistance evaluation. Scanning electron microscope (SEM) results showed that the enamel surfaces treated with 1.5 W/20 Hz and 2.0 W/20 Hz showed more etching-like appearance than those with other laser-parameter combinations. The laser-parameter combinations of 1.5 W/15 Hz and 1.5 W/20 Hz were found to be efficient for the TBS test. The mean TBS value of 14.45 ± 1.67 MPa in the laser irradiated group was significantly higher than that in the untreated group (3.48 ± 0.35 MPa) but lower than that in the 35% phosphoric acid group (21.50 ± 3.02 MPa). The highest mean TBS value of 26.64 ± 5.22 MPa was identified in the combination group (laser irradiation and then acid etching). Acid resistance evaluation showed that the pulsed Nd:YAG laser was efficient in preventing enamel demineralization. The SEM results of the fractured enamel surfaces, resin/enamel interfaces, and demineralization depths were consistent with those of the TBS test and the acid resistance evaluation. Pulsed Nd:YAG laser as an enamel surface pretreatment method presents a potential clinical application, especially for the caries-susceptible population or individuals with recently bleached teeth.

Influence of phosphoric acid etching on bond strength of adhesives

2015 ◽  
Vol 31 ◽  
pp. e8
Author(s):  
Y. Tamura ◽  
S. Shibasaki ◽  
S. Matsuyoshi ◽  
K. Tsubota ◽  
T. Takamizawa ◽  
...  
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Acid Etching ◽  
Phosphoric Acid Etching

Repair Surface Conditioning Measures Affect Enamel and Dentin Bond Strength

2020 ◽  
Vol 45 (6) ◽  
pp. 643-654
Author(s):  
P Kanzow ◽  
L Piecha ◽  
J Biermann ◽  
A Wiegand
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Hydrofluoric Acid ◽  
Silica Coating ◽  
Acid Etching ◽  
Universal Adhesive ◽  
Universal Primer ◽  
Surface Conditioning ◽  
Etch And Rinse ◽  
Phosphoric Acid Etching

Clinical Relevance Contamination of enamel and dentin with repair surface conditioning measures should be avoided. SUMMARY Objectives: To analyze whether the contamination with different repair conditioning measures impairs the adhesive performance of a universal adhesive applied in etch-and-rinse mode (ER) or self-etch mode (SE). Methods and Materials: Bovine enamel and dentin surfaces (each subgroup n=16) were bonded with a universal adhesive in ER or SE after contamination with different repair conditioning measures (sandblasting, silica coating, hydrofluoric acid etching, self-etching ceramic primer). In half of the groups, sand-blasting, silica coating, and hydrofluoric acid etching was followed by the use of a universal primer. If the universal adhesive was applied in ER, contamination was performed either before or after phosphoric acid etching. If the universal adhesive was applied in SE, bonding was performed after contamination. In the control groups, no contamination was simulated. Shear bond strength (SBS) and failure modes of composite buildups were determined after thermal cycling (10,000 cycles, 5°C-55°C). Statistical analysis was performed using analyses of variance, Weibull statistics, and χ2 tests (p<0.05). Results: In ER, sandblasting and silica coating significantly reduced SBS (control: enamel =25.7±4.2 MPa; dentin = 22.0±5.3 MPa) only when performed after phosphoric acid etching. Contamination with hydrofluoric acid impaired SBS on enamel but not on dentin. The self-etching ceramic primer reduced SBS, but not significantly. The contamination with the universal primer had no significant effect. In SE, all repair conditioning measures except the universal primer reduced SBS (control: enamel = 20.3±5.5 MPa; dentin = 23.0±4.0 MPa). Conclusion: Contamination of enamel and dentin by repair conditioning measures potentially affects bond strength.

Evaluating Various Preparation Protocols on the Shear Bond Strength of Repaired Composite

2017 ◽  
Vol 18 (3) ◽  
pp. 182-187
Author(s):  
Ayah A Al-Asmar ◽  
Khaled S Hatamleh ◽  
Muhanad Hatamleh ◽  
Mohammad Al-Rabab'ah
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Coupling Agent ◽  
Shear Bond Strength ◽  
Silane Coupling Agent ◽  
Acid Etching ◽  
Air Abrasion ◽  
Group V ◽  
Silane Coupling ◽  
Phosphoric Acid Etching

ABSTRACT Introduction The aim of this study is to evaluate the effect of different combinations of various surface treatments on the shear bond strength (SBS) of repaired composite resin. Materials and methods A total of 122 composite samples were prepared from Filtek Z350 XT. Samples were light cured and stored for 6 weeks. Surface treatment of old composite was done in five groups: Group I: bur roughening + phosphoric acid etching, group II: bur roughening + hydrofluoric acid etching + silane coupling agent, group II: air abrasion + phosphoric acid etching, group IV: air abrasion + phosphoric acid etching + silane coupling agent, group V: air abrasion + hydrofluoric acid etching + silane coupling agent. Bonding agent was applied to all surface-treated old composites and light cured. The fresh composite resin was bonded to treated surfaces and cured and stored in water at 37°C for 6 weeks. Shear bond strength was measured by a universal testing machine. Results Shear bond strength values of all groups were not statistically significant except for group V, which showed statistically significant higher SBS than group III. Conclusion Techniques with readily available materials at the clinic can attain similar SBS to more elaborate technique involving potentially hazardous materials. How to cite this article Al-Asmar AA, Hatamleh KS, Hatamleh M, Al-Rabab'ah M. Evaluating Various Preparation Protocols on the Shear Bond Strength of Repaired Composite. J Contemp Dent Pract 2017;18(3):182-187.

scholarly journals Effect of air abrasion on tensile bond strength of a single-bottle adhesive/indirect composite system to enamel

2007 ◽  
Vol 18 (1) ◽  
pp. 45-48 ◽  
Author(s):  
Paulo César G. Silva ◽  
Mariane Gonçalves ◽  
Telma N. do Nascimento ◽  
André Luiz B. Centola
Keyword(s):  
Phosphoric Acid ◽  
Bond Strength ◽  
Adhesive System ◽  
Tensile Bond Strength ◽  
Air Abrasion ◽  
Human Enamel ◽  
Significant Difference ◽  
Strength Tests ◽  
Indirect Composite ◽  
Phosphoric Acid Etching

This study evaluated the efficiency of air abrasion alone and associated with phosphoric acid etching on tensile bond strength of a single-bottle adhesive/indirect composite restorative system (Bond 1/Alert) to human enamel. Forty enamel surfaces from extracted human third molars were assigned to 4 groups (n= 10). Mach 4.1 (Kreativ Inc.) air abrasion equipment was used for 20 s. A special system of rod pairs aligned in a specific apparatus was used for tensile strength tests, according to ISO/TR 11405 standard (1994) with some modifications. Bond strength means were: G1 (air abrasion + rinsing + condensable composite resin Alert) = 3.46 ± 0.83 MPa; G2 (air abrasion + rinsing + Bond 1 adhesive system + Alert) = 4.00 ± 1.60 MPa; G3 (air abrasion + rinsing + 37% phosphoric acid + rinsing + Bond 1 + Alert) = 20.80 ± 3.95 MPa; and G4 (37% phosphoric acid + rinsing + Bond 1 + Alert) = 17.00 ± 2.74 MPa. The statistical analysis by Kruskal-Wallis test revealed that G1 and G2 presented statistically significant difference (p< 0.05) from G3 and G4 (p<0.01) and G1 and G3 did not differ significantly (p> 0.05) from G2 and G4, respectively.

Sign in / Sign up

Export Citation Format

Share Document