scholarly journals Influence of surface treatment of glass-ionomers on surface free energy and bond strength of resin composite

2013 ◽  
Vol 32 (5) ◽  
pp. 702-708 ◽  
Author(s):  
Eiichiro OTSUKA ◽  
Akimasa TSUJIMOTO ◽  
Toshiki TAKAMIZAWA ◽  
Tetsuya FURUICHI ◽  
Miho YOKOKAWA ◽  
...  
Keyword(s):  
Free Energy ◽  
Bond Strength ◽  
Surface Treatment ◽  
Surface Free Energy ◽  
Resin Composite

Interfacial Characteristics and Bond Durability of Universal Adhesive to Various Substrates

2017 ◽  
Vol 42 (2) ◽  
pp. E59-E70 ◽  
Author(s):  
A Tsujimoto ◽  
WW Barkmeier ◽  
T Takamizawa ◽  
TM Wilwerding ◽  
MA Latta ◽  
...  
Keyword(s):  
Free Energy ◽  
Bond Strength ◽  
Surface Free Energy ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Universal Adhesive ◽  
Universal Adhesives ◽  
Post Hoc ◽  
Interfacial Characteristics ◽  
Bond Durability

SUMMARY Objective: This study investigated the interfacial characteristics and bond durability of universal adhesives to various substrates. Methods and Materials: Two universal adhesives were used: 1) Scotchbond Universal and 2) G-Premio Bond. The substrates used were bovine enamel and dentin with or without phosphoric acid etching, resin composite, lithium disilicate and leucite-reinforced glass ceramics, zirconia, and metal alloys. The surface free energy and the parameters of various substrates and of substrates treated by adhesive after light irradiation were determined by measuring the contact angles of three test liquids. Resin composite was bonded to the various substrates to determine shear bond strength after 24 hours water storage and 10,000 thermal cycles. A one-way analysis of variance (ANOVA) and the Tukey post hoc test were used for the surface free energy data, and a two-way ANOVA and the Tukey post hoc test were used for analysis of shear bond strength data (α=0.05). Results: The interfacial characteristics of the various substrates show significant differences depending on the type of substrate, but the interfacial characteristics of substrate treated by adhesive after light irradiation did not show any significant differences regardless of the substrate used. The bond durability of two universal adhesives to various substrates differs depending on the type of substrate and the adhesive. Conclusions: The results of this study suggest that universal adhesives modify the interfacial characteristics of a wide range of substrates and create a consistent surface, but the bond durability of universal adhesive to various substrates differs depending on the type of substrate and the adhesive.

scholarly journals Effect of oxygen inhibition in two-step self-etch systems on surface free energy and dentin bond strength with a chemically cured resin composite

2014 ◽  
Vol 56 (3) ◽  
pp. 201-207 ◽  
Author(s):  
Ayumi Yamaji ◽  
Akimasa Tsujimoto ◽  
Tetsui Asaoka ◽  
Saki Matsuyoshi ◽  
Kenji Tsuchiya ◽  
...  
Keyword(s):  
Free Energy ◽  
Bond Strength ◽  
Surface Free Energy ◽  
Resin Composite ◽  
Oxygen Inhibition ◽  
Effect Of Oxygen ◽  
Self Etch

scholarly journals Improvement of Laser Transmission Welding of Glass with Titanium Alloy by Laser Surface Treatment

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2060
Author(s):  
Pin Li ◽  
Xingwen Xu ◽  
Wensheng Tan ◽  
Huixia Liu ◽  
Xiao Wang
Keyword(s):  
Free Energy ◽  
Titanium Alloy ◽  
Surface Treatment ◽  
Surface Free Energy ◽  
Laser Surface ◽  
Tensile Fracture ◽  
Laser Surface Treatment ◽  
Laser Transmission Welding ◽  
Fracture Failure ◽  
Welding Strength

Laser surface treatment of the titanium alloy was locally oxidized on the metal surface to improve the joint strength of laser transmission welding of high borosilicate glass with titanium alloy. The results find that the welding strength was increased 5 times. The welding mechanism was investigated by the morphology of the welded parts, the tensile-fracture failure mode, the diffusion of the interface elements, and the surface free energy. The results show that there are many adherents between the titanium alloy and high borosilicate glass after tensile fracture, the welding strength was higher when the laser voltage was 460 V, and the tensile–fracture failure mode is mainly ductile fracture. Element-line scanning analysis revealed that elemental diffusion occurred in the two materials, which is an important reason for the high welding strength. Surface free-energy analysis shows that laser surface treatment improves the surface free energy of titanium alloy, promotes the wettability and compatibility, and increases the welding strength of titanium alloy with glass.

scholarly journals Influence of light intensity on surface-free energy and dentin bond strength of single-step self-etch adhesives

2015 ◽  
Vol 34 (5) ◽  
pp. 611-617 ◽  
Author(s):  
Kie NOJIRI ◽  
Akimasa TSUJIMOTO ◽  
Takayuki SUZUKI ◽  
Syo SHIBASAKI ◽  
Saki MATSUYOSHI ◽  
...  
Keyword(s):  
Free Energy ◽  
Light Intensity ◽  
Bond Strength ◽  
Surface Free Energy ◽  
Single Step ◽  
Self Etch

scholarly journals Influence of Light Intensity on Surface Free Energy and Dentin Bond Strength of Core Build-up Resins

2015 ◽  
Vol 40 (1) ◽  
pp. 87-95 ◽  
Author(s):  
Y Shimizu ◽  
A Tsujimoto ◽  
T Furuichi ◽  
T Suzuki ◽  
K Tsubota ◽  
...  
Keyword(s):  
Free Energy ◽  
Light Intensity ◽  
Bond Strength ◽  
Surface Free Energy ◽  
Testing Machine ◽  
Contact Angles ◽  
Significance Level ◽  
The Core ◽  
Light Intensities ◽  
Bond Strengths

SUMMARY Objective We examined the influence of light intensity on surface free energy characteristics and dentin bond strength of dual-cure direct core build-up resin systems. Methods Two commercially available dual-cure direct core build-up resin systems, Clearfil DC Core Automix with Clearfil Bond SE One and UniFil Core EM with Self-Etching Bond, were studied. Bovine mandibular incisors were mounted in acrylic resin and the facial dentin surfaces were wet ground on 600-grit silicon carbide paper. Adhesives were applied to dentin surfaces and cured with light intensities of 0 (no irradiation), 200, 400, and 600 mW/cm2. The surface free energy of the adhesives (five samples per group) was determined by measuring the contact angles of three test liquids placed on the cured adhesives. To determine the strength of the dentin bond, the core build-up resin pastes were condensed into the mold on the adhesive-treated dentin surfaces according to the methods described for the surface free energy measurement. The resin pastes were cured with the same light intensities as those used for the adhesives. Ten specimens per group were stored in water maintained at 37°C for 24 hours, after which they were shear tested at a crosshead speed of 1.0 mm/minute in a universal testing machine. Two-way analysis of variance (ANOVA) and a Tukey-Kramer test were performed, with the significance level set at 0.05. Results The surface free energies of the adhesive-treated dentin surfaces decreased with an increase in the light intensity of the curing unit. Two-way ANOVA revealed that the type of core build-up system and the light intensity significantly influence the bond strength, although there was no significant interaction between the two factors. The highest bond strengths were achieved when the resin pastes were cured with the strongest light intensity for all the core build-up systems. When polymerized with a light intensity of 200 mW/cm2 or less, significantly lower bond strengths were observed. Conclusions The data suggest that the dentin bond strength of core build-up systems are still affected by the light intensity of the curing unit, which is based on the surface free energy of the adhesives. On the basis of the results and limitations of the test conditions used in this study, it appears that a light intensity of >400 mW/cm2 may be required for achieving the optimal dentin bond strength.

scholarly journals Influence of air-powder polishing on bond strength and surface-free energy of universal adhesive systems

2017 ◽  
Vol 36 (6) ◽  
pp. 762-769 ◽  
Author(s):  
Yukie TAMURA ◽  
Toshiki TAKAMIZAWA ◽  
Yutaka SHIMAMURA ◽  
Shunsuke AKIBA ◽  
Chiaki YABUKI ◽  
...  
Keyword(s):  
Free Energy ◽  
Bond Strength ◽  
Surface Free Energy ◽  
Adhesive Systems ◽  
Universal Adhesive

scholarly journals Influence of surface treatment of contaminated zirconia on surface free energy and resin cement bonding

2015 ◽  
Vol 34 (1) ◽  
pp. 91-97 ◽  
Author(s):  
Ryo ISHII ◽  
Akimasa TSUJIMOTO ◽  
Toshiki TAKAMIZAWA ◽  
Keishi TSUBOTA ◽  
Takayuki SUZUKI ◽  
...  
Keyword(s):  
Free Energy ◽  
Surface Treatment ◽  
Surface Free Energy ◽  
Resin Cement
Sign in / Sign up

Export Citation Format

Share Document