scholarly journals Recent advances in structural fibre-reinforced concrete focused on polyolefin-based macro-synthetic fibres

2020 ◽  
Vol 70 (337) ◽  
pp. 206 ◽  
Author(s):  
M. G. Alberti ◽  
A. Enfedaque ◽  
J. C. Gálvez ◽  
A. Picazo
Keyword(s):  
Reinforced Concrete ◽  
Reinforce Concrete ◽  
Tensile Tests ◽  
Environmental Benefits ◽  
Fibre Reinforced Concrete ◽  
Steel Fibres ◽  
Lower Weight ◽  
Steel Bars ◽  
Future Challenges ◽  
And Storage

Fibre-reinforced concrete (FRC) allows reduction in, or substitution of, steel-bars to reinforce concrete and led to the commonly named structural FRC, with steel fibres being the most widespread. Macro-polymer fibres are an alternative to steel fibres, being the main benefits: chemical stability and lower weight for analogous residual strengths of polyolefin-fibre-reinforced concrete (PFRC). Furthermore, polyolefin fibres offer additional advantages such as safe-handling, low pump-wear, light weight in transport and storage, and an absence of corrosion. Other studies have also revealed environmental benefits. After 30 years of research and practice, there remains a need to review the opportunities that such a type of fibre may provide for structural FRC. This study seeks to show the advances and future challenges of use of these polyolefin fibres and summarise the main properties obtained in both fresh and hardened states of PFRC, focussing on the residual strengths obtained from flexural tensile tests.

scholarly journals Mechanical Optimization of Concrete with Recycled PET Fibres Based on a Statistical-Experimental Study

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 240
Author(s):  
Alejandro Meza ◽  
Pablo Pujadas ◽  
Laura Montserrat Meza ◽  
Francesc Pardo-Bosch ◽  
Rubén D. López-Carreño
Keyword(s):  
Reinforced Concrete ◽  
Aspect Ratio ◽  
Mechanical Performance ◽  
Tensile Tests ◽  
Superior Performance ◽  
Fibre Reinforced Concrete ◽  
Marine Fauna ◽  
Recycled Pet ◽  
Pet Bottles ◽  
Fibre Aspect Ratio

Discarded polyethylene terephthalate (PET) bottles have damaged our ecosystem. Problems of marine fauna conservation and land fertility have been related to the disposal of these materials. Recycled fibre is an opportunity to reduce the levels of waste in the world and increase the mechanical performance of the concrete. PET as concrete reinforcement has demonstrated ductility and post-cracking strength. However, its performance could be optimized. This study considers a statistical-experimental analysis to evaluate recycled PET fibre reinforced concrete with various fibre dose and aspect ratio. 120 samples were experimented under workability, compressive, flexural, and splitting tensile tests. The results pointed out that the fibre dose has more influence on the responses than its fibre aspect ratio, with statistical relation on the tensional toughness, equivalent flexural strength ratio, volumetric weight, and the number of fibres. Moreover, the fibre aspect ratio has a statistical impact on the tensional toughness. In general, the data indicates that the optimal recycled PET fibre reinforced concrete generates a superior performance than control samples, with an improvement similar to those reinforced with virgin fibres.

scholarly journals Experimental Investigation of Shear Strength for Steel Fibre Reinforced Concrete Beams

2021 ◽  
Vol 15 (1) ◽  
pp. 81-92
Author(s):  
Constantinos B. Demakos ◽  
Constantinos C. Repapis ◽  
Dimitros P. Drivas
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Shear Strength ◽  
Reinforced Concrete ◽  
Steel Fibre ◽  
Concrete Beams ◽  
Reinforced Concrete Beams ◽  
Fibre Reinforced Concrete ◽  
Steel Fibres ◽  
Steel Fibre Reinforced Concrete

Aims: The aim of this paper is to investigate the influence of the volume fraction of fibres, the depth of the beam and the shear span-to-depth ratio on the shear strength of steel fibre reinforced concrete beams. Background: Concrete is a material widely used in structures, as it has high compressive strength and stiffness with low cost manufacturing. However, it presents low tensile strength and ductility. Therefore, through years various materials have been embedded inside it to improve its properties, one of which is steel fibres. Steel fibre reinforced concrete presents improved flexural, tensile, shear and torsional strength and post-cracking ductility. Objective: A better understanding of the shear performance of SFRC could lead to improved behaviour and higher safety of structures subject to high shear forces. Therefore, the influence of steel fibres on shear strength of reinforced concrete beams without transverse reinforcement is experimentally investigated. Methods: Eighteen concrete beams were constructed for this purpose and tested under monotonic four-point bending, six of which were made of plain concrete and twelve of SFRC. Two different aspect ratios of beams, steel fibres volume fractions and shear span-to-depth ratios were selected. Results: During the experimental tests, the ultimate loading, deformation at the mid-span, propagation of cracks and failure mode were detected. From the tests, it was shown that SFRC beams with high volume fractions of fibres exhibited an increased shear capacity. Conclusion: The addition of steel fibres resulted in a slight increase of the compressive strength and a significant increase in the tensile strength of concrete and shear resistance capacity of the beam. Moreover, these beams exhibit a more ductile behaviour. Empirical relations predicting the shear strength capacity of fibre reinforced concrete beams were revised and applied successfully to verify the experimental results obtained in this study.

scholarly journals Numerical Simulation of the Fracture Behaviour of High-Performance Fibre Reinforced Concrete by Using a Cohesive-Crack-Based Inverse Analysis

2021 ◽  
Author(s):  
Alejandro Enfedaque ◽  
Marcos G. Alberti ◽  
Jaime C. Gálvez ◽  
Pedro Cabanas
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Inverse Analysis ◽  
High Performance ◽  
Fracture Behaviour ◽  
Constitutive Models ◽  
Cohesive Crack ◽  
Fibre Reinforced Concrete ◽  
Steel Fibres ◽  
Structural Applications

Fibre reinforced concrete (FRC) has become an alternative for structural applications due its outstanding mechanical properties. The appearance of new types of fibres and the fibre cocktails that can be configured mixing them has created FRC that clearly exceed the minimum mechanical properties required in the standards. Consequently, in order to take full advantage of the contribution of the fibres in construction projects, it is of great interest to have constitutive models that simulate the behaviour of the materials. This study aimed to simulate the fracture behaviour of five types of FRC, three with steel hooked fibres, one with a combination of two types of steel fibres and one with a combination of polyolefin fibres and two types of steel fibres, by means of an inverse analysis based on the cohesive crack approach. The results of the numerical simulations defined the softening functions of each FRC formulation and have pointed out the synergies that are created through use of fibre cocktails. The information obtained might suppose a remarkable advance for designers using high-performance FRC in structural elements.

scholarly journals Preparation and characterization of glass fibers – polymers (epoxy) bars (GFRP) reinforced concrete for structural applications

2016 ◽  
Vol 11 (1) ◽  
pp. 15-22
Author(s):  
Saeed Alkjk ◽  
Rafee Jabra ◽  
Salem Alkhater
Keyword(s):  
Tensile Strength ◽  
Reinforced Concrete ◽  
Concrete Beams ◽  
Glass Fibers ◽  
Reinforce Concrete ◽  
Experimental Program ◽  
Gfrp Bars ◽  
Structural Applications ◽  
Steel Bars ◽  
Deflection Test

Abstract The paper presents some of the results from a large experimental program undertaken at the Department of Civil Engineering of Damascus University. The project aims to study the ability to reinforce and strengthen the concrete by bars from Epoxy polymer reinforced with glass fibers (GFRP) and compared with reinforce concrete by steel bars in terms of mechanical properties. Five diameters of GFRP bars, and steel bars (4mm, 6mm, 8mm, 10mm, 12mm) tested on tensile strength tests. The test shown that GFRP bars need tensile strength more than steel bars. The concrete beams measuring (15cm wide × 15cm deep × and 70cm long) reinforced by GFRP with 0.5 vol.% ratio, then the concrete beams reinforced by steel with 0.89 vol.% ratio. The concrete beams tested on deflection test. The test shown that beams which reinforced by GFRP has higher deflection resistance, than beams which reinforced by steel. Which give more advantage to reinforced concrete by GFRP.

scholarly journals Failure mode in shear of steel fiber reinforced concrete beams

2018 ◽  
Vol 163 ◽  
pp. 02003 ◽  
Author(s):  
Julita Krassowska ◽  
Marta Kosior-Kazberuk
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Concrete Beams ◽  
Fiber Reinforced Concrete ◽  
Reinforced Concrete Beams ◽  
Bending Test ◽  
Fibre Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Steel Fibres

Experimental tests were carried out to assess the failure model of steel fiber reinforced concrete beams. Experimental research was focused on observing changes in the behavior of the tested elements depending on the amount of shear reinforcement and the fiber. Model two-span beams with a cross-section of 80x180 mm and a length of 2000 mm were tested. The beams had varied stirrup spacing. The following amounts of steel fibres in concrete were used: 78.5 kg/m3 (1.0%) i 118 kg/m3 (1.5%). Concrete beams without fibres were examined at the same time. The beams were loaded in a five-point bending test until they were destroyed. Shear or bending capacity of the element was observed. Fibre reinforced concrete beams were not destroyed rapidly, but they kept their shape consistent under load. Larger number of diagonal cracks with a smaller width were observed in fibre reinforced concrete beams. Failure of concrete beams without fibres was rapid, with a characteristic brittle cracking. Steel fibres revealed the ability to transfer significant shear stress after cracking in comparison to plain concrete.

Les bétons renforcés de fibres d'acier et la multifissuration

2000 ◽  
Vol 27 (4) ◽  
pp. 774-784 ◽  
Author(s):  
Benoît Bissonnette ◽  
Yves Therrien ◽  
Richard Pleau ◽  
Michel Pigeon ◽  
François Saucier
Keyword(s):  
Reinforced Concrete ◽  
Large Scale ◽  
Intrinsic Property ◽  
Tensile Tests ◽  
Experimental Program ◽  
Fibre Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Restrained Shrinkage ◽  
Test Results ◽  
Multiple Cracking

This paper presents the results of an investigation aimed at establishing if multiple cracking can be an intrinsic property of steel fibre reinforced concrete (SFRC) in the hardened state and identifying the conditions to obtain it systematically. For this purpose, uniaxial restrained shrinkage tests and tensile tests were performed on large-scale SFRC specimens. The parameters studied in the experimental program were the fibre content (0-100 kg/m3), the fibre geometry, and the water to cement ratio of the concrete matrix (w/c = 0.40-0.80). The test results tend to indicate that multiple cracking is not a property of SFRC as such, at least within the range of concrete matrices and fibre contents investigated and that were intended to be compatible with practical considerations. While it does not mean that fibre reinforcement is not effective in terms of crack control, it is important to be careful in the analysis of test results where the effect of the restraining and exposure conditions might have been significant.Key words: cracking, drying shrinkage, fibre-reinforced concrete, multiple cracking, repairs, restrained shrinkage, steel fibres, tension.

scholarly journals Investigating Flexural Behaviour of Prestressed Concrete Girders Cast by Fibre-Reinforced Concrete

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Muhammad U. Rashid ◽  
Liaqat A. Qureshi ◽  
Muhammad F. Tahir
Keyword(s):  
Reinforced Concrete ◽  
Construction Industry ◽  
Prestressed Concrete ◽  
Volume Fraction ◽  
Small Scale ◽  
Fibre Reinforced Concrete ◽  
Flexural Behaviour ◽  
Steel Fibres ◽  
Concrete Girders ◽  
Prestressed Concrete Girders

The main objective of this research was to investigate the effect of adding polypropylene and steel fibres on flexural behaviour of prestressed concrete girders. Although the construction industry is frequently using prestressed concrete to increase the load-carrying capacity of structures, it can be further enhanced by using fibres. In this paper, experimental work was carried out to encourage the construction industry in utilizing fibres in prestressed concrete members to improve the mechanical properties of these members. As past investigations on fibre-reinforced prestressed beams were limited, the present work was done on small-scale fibre-reinforced I-shaped prestressed concrete girders. Six small-scale prestressed concrete girders were cast comprising a control girder, a hybrid girder, two girders with varying percentages of steel fibres, and two girders with varying percentages of polypropylene fibres. These girders were tested by centre point loading up to failure. It was concluded that, by the addition of small volume fraction of fibres, not only the ductility but also the tensile strength and flexural strength of FRC girders could be improved. It also altered the failure pattern positively by enhancing large strains in concrete and steel. Steel fibre-reinforced concrete showed higher energy absorption and deflection at ultimate loads in comparison to other specimens.

Sign in / Sign up

Export Citation Format

Share Document