scholarly journals Recycled concrete with coarse recycled aggregate. An overview and analysis

2018 ◽  
Vol 68 (330) ◽  
pp. 151 ◽  
Author(s):  
B. González-Fonteboa ◽  
S. Seara-Paz ◽  
J. De Brito ◽  
I. González-Taboada ◽  
F. Martínez-Abella ◽  
...  

The construction field has contributed to environmental degradation, producing a high amount of construction and demolition waste (C&D waste) and consuming large volumes of natural resources. In this context, recycled concrete (RC) has been recognised as a means to preserve natural resources and reduce space for waste storage. During the last decades, many researchers have developed works studying different recycled concrete properties. This review focuses on structural RC made with coarse recycled aggregate from concrete waste. The main objective is to provide a state of the art report on RC’s properties and an analysis on how to predict them taking into account relevant research works. Moreover, the study tries to collect and update RC findings, proposing equations to define RC’s performance, in terms of mechanical strength, modulus of elasticity, stress-strain, creep and shrinkage.

Author(s):  
Iago Lopes dos Santos ◽  
Luciana Vanni Frantz ◽  
Angela Borges Masuero

abstract: Concern with the maintenance of natural resources has increased research about recycled aggregates for concrete production. However, the heterogeneity of recycled aggregates is one of the main constraints for their use in practice, because it can generate variability in concrete properties, hence reducing their final quality. Then, the jigging has been seen as a promising way of improving recycled aggregate quality. This paper aimed to evaluate its use for better application in concrete. A modified jig was used to sort recycled coarse aggregates. Concrete were produced with water/cement ratio from 0.5 and 100% of recycled coarse aggregate. The recycled aggregate properties upgrade were achieved and the results of compressive strength and modulus of elasticity of recycled concrete made with aggregate which were submitted to jigging were increased, indicating a potential application in wide scale.


2019 ◽  
Vol 12 (1) ◽  
pp. 250 ◽  
Author(s):  
Debora Acosta Álvarez ◽  
Anadelys Alonso Aenlle ◽  
Antonio José Tenza-Abril ◽  
Salvador Ivorra

The main objective of this work is to evaluate the properties of hot asphalt mixtures that have been manufactured with different recycled concrete aggregate (RCA) percentages (0%, 20%, 40%, 60% and 80% of the fraction 5–13 mm) and asphalt (4%, 4.5% and 5%). Dense asphalt mixtures were made; partially replacing the natural aggregate (NA) fraction between 5 and 13 mm. Marshall specimens were manufactured to determine the main properties of the asphalt concrete (AC) in terms of density, voids, stability and deformation. Additionally, the optimal asphalt content (OAC) was determined, and measured the water sensibility, the stiffness modulus and the permanent deformation. The results corroborate the potential for using these sources of construction and demolition waste (CDW) as a RCA in asphalt concrete and show that the hot asphalt mixtures with up to 40% substitution of natural aggregate by recycled aggregate in the fraction 5–13 mm present good behavior.


2012 ◽  
Vol 509 ◽  
pp. 1-5
Author(s):  
Su Ping Cui ◽  
Qi Dong Liu ◽  
Jian Hua Yan ◽  
Xin Du

In this paper, the construction and demolition waste (C&D waste) recycling techniques in China is summarized, and proposed the C&D waste recycling suggestions in this foundation. The C&D waste can be divided into construction waste, decorating waste, demolition waste and natural disaster ruin waste. In addition to be buried, domestic C&D waste can be made into landscape material, roadbed material, recycled aggregate, recycled brick, recycled concrete, recycled admixture and so on. The state should establish positive promoting policies, improve the recycling industrial chain, and promote the healthy development of the C&D waste recycling.


Author(s):  
Carine N. S. Reis ◽  
Paulo R. L. Lima ◽  
Mônica B. Leite

The operation of reinforced concrete structures is directly associated with the adhesion between the steel bar and the concrete, which allows the internal forces to be transferred to the reinforcement during the process of loading the structural elements. The modification of the concrete composition, with the introduction of recycled aggregate from construction and demolition waste (CDW), affects the steel-concrete interface and can modify the bonding stress, which is also influenced by the type and diameter of the bar used. In this work, the influence of the recycled fine aggregate (RFA) and types of steel bar on the steel-concrete bond was experimentally evaluated using the pullout test. Conventional concrete and recycled concrete, with RFA replacement level of 25%, were produced. Two types of steel rebars (i.e.,plain and deformed) with  diameters of 10.0 and 16.0mm were considered in this paper. The results indicate a reduction in the adhesion stress with the introduction of recycled aggregate, but this trend is influenced by the diameter of the bar used. The use of ribbed bars modifies the stress bon-slip behavior, with an increase in the average bond strength, which is also observed with the reduction of the diameter of the bar.


Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6545
Author(s):  
Lorena Serrano-González ◽  
Daniel Merino-Maldonado ◽  
Manuel Ignacio Guerra-Romero ◽  
Julia María Morán-Del Pozo ◽  
Paulo Costa Lemos ◽  
...  

One approach to tackle the problems created by the vast amounts of construction and demolition waste (CDW) generated worldwide while at the same time lengthening concrete durability and service life is to foster the use of recycled aggregate (RA) rather than natural aggregate (NA). This article discusses the use of polyhydroxyalkanoates (PHAs)-producing mixed microbial cultures (MMCs) to treat the surface of recycled concrete with a view to increase its resistance to water-mediated deterioration. The microorganisms were cultured in a minimal medium using waste pinewood bio-oil as a carbon source. Post-application variations in substrate permeability were determined with the water drop absorption and penetration by water under pressure tests. The significant reduction in water absorption recorded reveals that this bioproduct is a promising surface treatment for recycled concrete.


2015 ◽  
Vol 732 ◽  
pp. 411-414 ◽  
Author(s):  
Tereza Pavlů ◽  
Magdaléna Šefflová

Recycled construction and demolition waste, especially recycled concrete, is able to use as an aggregate for concrete. The high water absorption capacity (WA) of recycled aggregate has a negative impact of concrete mix workability and influences the water-cement ratio. This paper presents results of experimental measurement of WA of recycled aggregate and recycled concrete. Series of concrete samples with various replacement ratios of natural aggregate and recycled aggregate were prepared for this study. The main aim of this study is to analyze the influence of recycled aggregate WA, and mixture ratios on the WA of hardened concrete (HC). Regression model to estimate the WA of hardened concrete is presented.


Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 695
Author(s):  
Natt Makul ◽  
Roman Fediuk ◽  
Mugahed Amran ◽  
Abdullah M. Zeyad ◽  
Sergey Klyuev ◽  
...  

Currently, a number of disadvantages hampers the use of recycled concrete aggregates (RCA). The current review proves that concretes made with complete replacement of natural aggregate with RCA allow the production of high-quality concrete. One of the possibilities for improving concrete properties with RCA is the use of extended curing and pozzolanic materials with varying cement ratios. The potential use of RCA concretes is in the production of high-value materials that increase environmental and financial benefits. RCA have strong potential in the development of a new generation of concrete and stimulate economic activity in many countries in addition to optimizing natural resources. Economic benefits include minimal travel costs; cheaper sources of concrete than newly mined aggregates; reduction of the landfill area required for the placement of concrete waste; the use of RCA minimizes the need for gravel extraction, etc. The proposed strategy could be to sequentially separate demolition waste such as roof finishes, waterproof materials, interior and exterior materials, etc. Closing life cycles is the main approach used for efficient structures for the recycling and reuse of construction and demolition waste in the production and recovery of materials, especially when recycling and reusing materials. In the life cycle, the recycling of recovered materials allows them to be used for new construction purposes, avoiding the use of natural concrete aggregates. Government, design institutes, construction departments and project managers should be involved in the creation and use of RCA. In demolition and construction, the main players are the project owners. Their obligations, expectations and responsibilities must be properly aligned. For the past 20 years, recycled concrete aggregate from demolition and construction waste has been considered as an alternative to pure concrete in structural concrete to minimize the environmental impact of construction waste and demolition waste and the conversion of natural aggregate resources. It is now recognized that the use of RCA for the generations of concrete is a promising and very attractive technology for reducing the environmental impact of the construction sector and conserving natural resources. In the market, the selling price is not an obstacle for market applications of RCA, as there are scenarios in which their cost is lower than the cost of products made from conventional building materials. This is more of an acceptance factor in the market for recycled concrete aggregates. In this sector, the lack of identification, accreditation and uniform quality certification systems and their narrow application cause some marketing problems. With proper RCA preparation, concrete with standard physical and mechanical properties and performance characteristics can be obtained.


2021 ◽  
Vol 6 (11) ◽  
pp. 155
Author(s):  
Natividad Garcia-Troncoso ◽  
Bowen Xu ◽  
Wilhenn Probst-Pesantez

Recycling of construction and demolition waste is a central point of discussion throughout the world. The application of recycled concrete as partial replacement of mineral aggregates in concrete mixes is one of the alternatives in the reduction of pollution and savings in carbon emissions. The combined influence of the recycled crushed concrete, lime, and natural pozzolana on the mechanical and sustainable properties of concrete materials is firstly proposed in this study. In this research, unconventional construction materials are employed to produce concrete: the recycled crushed concrete is used as coarse aggregate, while lime and natural pozzolana are used as a partial replacement for cement. Substitutions of 10%, 20%, 50% of gravel are made with recycled aggregates, and 2%, 5%, 10% of cement with lime and natural pozzolan. Tests on the fresh and hardened properties, destructive (compressive strength) and non-destructive tests (sclerometer rebound and ultrasound) of mixtures are carried out. It is shown that the use of recycled materials can provide an increase in compressive strength of up to 34% with respect to conventional concrete. Life cycle cost and sustainability assessments indicate that concrete materials incorporating recycled aggregate possess good economic and environmental impacts.


2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Mirjana Malešev ◽  
Vlastimir Radonjanin ◽  
Gordana Broćeta

Following an example of the world's great powers that developed the recycling industry after natural disasters and wars, the paper points to the possibility of using large quantities of construction and demolition waste, generated as a result of the recent floods in the BiH and Serbia. Based on the years of extensive experimental research, and the research conducted by eminent experts, an overview is provided of the most basic properties and application of recycled aggregate concrete. It has been shown that the application of coarse recycled concrete aggregate, as the component materials in the concrete mixtures, it is possible to produce structural concrete that can be satisfactory and even with high quality, which primarily depends on the characteristics of crushed demolished concrete.


2016 ◽  
Vol 847 ◽  
pp. 156-165
Author(s):  
Marco Pepe ◽  
Eduardus Koenders ◽  
Romildo Dias Toledo Filho ◽  
Enzo Martinelli

The construction sector is more and more committed to reduce its environmental impacts. One of the key actions undertaken in the last decade deals with the ability of turning construction and demolition waste into new raw materials. For instance, the use of recycled aggregates for producing new concrete was one of the most investigated. Thus, in the last decade, plenty of researches were involved in project on characterising the mechanical behaviour of concrete made with recycled aggregates. However, these projects were mainly experimental in nature and generally led to merely empirical formulations. Conversely, this paper is intended at providing a contribution for predicting the mechanical properties of Recycled Aggregates Concrete (RAC). Particularly, it aims at quantifying the effect of replacing ordinary aggregates with Recycled Concrete Aggregates (RCA) on the resulting compressive strength of RAC. To this end, a conceptual model considering both the relevant physical properties of regular and recycled aggregates, including the attached mortar content, and the hydration reactions of Portland cement paste is proposed. The actual predictive capacity of the proposed model is assessed through an experimental validation against experimental tests carried out on several concrete batches produced with various values for the different keys parameters, such as the nominal water-to-cement ratio, the aggregates replacement ratio and the initial moisture condition of aggregates. Both the experimental data and the theoretical formulations proposed in this paper stem out from the inter-university collaboration developed as part of the EU funded EnCoRe Project (www.encore-fp7.unisa.it).


Sign in / Sign up

Export Citation Format

Share Document