Performance and emissions evaluation of absorption refrigeration cooling from biomass waste heat

2011 ◽  
Author(s):  
Oberweis
Keyword(s):  
Waste Heat ◽  
Absorption Refrigeration ◽  
Biomass Waste ◽  
Performance And Emissions

A Parametric Examination of the Factors Affecting the Performance of a Diffusion Absorption Refrigeration System

2021 ◽  
pp. 1-38
Author(s):  
Noman Yousuf ◽  
Timothy Anderson ◽  
Roy Nates
Keyword(s):  
Waste Heat ◽  
Operating Conditions ◽  
Design Parameters ◽  
Working Fluid ◽  
Low Grade ◽  
Absorption Refrigeration ◽  
Factors Affecting ◽  
Thermally Driven ◽  
Mass Flowrate ◽  
Diffusion Absorption

Abstract Despite being identified nearly a century ago, the diffusion absorption refrigeration (DAR) cycle has received relatively little attention. One of the strongest attractions of the DAR cycle lies in the fact that it is thermally driven and does not require high value work. This makes it a prime candidate for harnessing low grade heat from solar collectors, or the waste heat from stationary generators, to produce cooling. However, to realize the benefits of the DAR cycle, there is a need to develop an improved understanding of how design parameters influence its performance. In this vein, this work developed a new parametric model that can be used to examine the performance of the DAR cycle for a range of operating conditions. The results showed that the cycle's performance was particularly sensitive to several factors: the rate of heat added and the temperature of the generator, the effectiveness of the gas and solution heat exchangers, the mass flowrate of the refrigerant and the type of the working fluid. It was shown that can deliver good performance at low generator temperatures if the refrigerant mass fraction in the strong solution is made as high as possible. Moreover, it was shown that a H2O-LiBr working pair could be useful for achieving cooling at low generator temperatures.

Thermal Energy Requirements of Air-Conditioning Systems

1971 ◽  
Vol 93 (2) ◽  
pp. 172-176
Author(s):  
M. E. Lackey
Keyword(s):  
Thermal Energy ◽  
Air Conditioning ◽  
Waste Heat ◽  
Energy Requirements ◽  
Absorption Refrigeration ◽  
Refrigeration System ◽  
Fast Breeder Reactors ◽  
Breeder Reactors ◽  
Absorption Refrigeration System ◽  
Air Conditioning Systems

The thermal energy requirements for air conditioning by compressive and absorption methods were determined for light-water, thermal-breeder, and fast-breeder reactors. The energy required to produce a ton-hour of refrigeration varied from 5100 Btu to 13,100 Btu by absorption and from 5600 to 8800 Btu by compression. The amount of waste heat dissipated to the environment at the reactor site as a consequence of producing a ton-hour of air conditioning ranged from an increase of 21,000 Btu for the electric-motor-driven refrigeration system to a decrease of 6000 Btu for the absorption refrigeration system.

Sign in / Sign up

Export Citation Format

Share Document