Experimental and Full Scale Investigation of the Importance of Fatigue Damage Due to Wave-Induced Vibration Stress in A Container Vessel

2006 ◽  
Author(s):  
I Drummen ◽  
◽  
T Moan ◽  
G Storhaug ◽  
E Moe ◽  
...  
Keyword(s):  
Fatigue Damage ◽  
Full Scale ◽  
Vibration Stress ◽  
Wave Induced

First Ocean Going Ships With Springing and Whipping Included in the Ship Design

2011 ◽  
Author(s):  
Gaute Storhaug ◽  
Erlend Moe ◽  
Ricardo Barreto Portella ◽  
Tomazo Garzia Neto ◽  
Nelson Luiz Coelho Alves ◽  
...  
Keyword(s):  
Fatigue Damage ◽  
Current Model ◽  
Life Time ◽  
Model Tests ◽  
Full Scale ◽  
Development Projects ◽  
Transient Vibration ◽  
Hull Girder ◽  
Fatigue Evaluation ◽  
Wave Induced

It is well known that ships vibrate due to waves. The wave induced vibrations of the hull girder are referred to as springing (resonance) and whipping (transient vibration from impacts). These vibrations contribute to the fatigue damage of fatigue sensitive details. An Ore Carrier of 400 000 dwt is currently being built by DSME, and at time of delivery, it will be the world’s largest bulk (ore) carrier. The scantlings of large ships must be carefully designed with respect to global loading, and when extending the design beyond experience, it is also wise to consider all aspects that may affect operation and the life time costs. The vessel will also enter a long term contract and is therefore to be evaluated for 30 year Brazil-China operation. In order to minimize the risk of fatigue damage, the vessel is designed according to DNV’s class notation CSA-2 requiring direct calculations of the loading and strength. Further it has been requested to include the effect of springing and whipping in the design. Reliable numerical tools for assessing the additional fatigue effect of vibrations are non-existing. DNV has, however, developed an empirical guidance on how the additional effect may be taken into account based on previous development projects related to the effect of vibrations on large ore carriers Due to the size and route of operation of the new design, it has, however, been required by the owner to carry out model tests in both ballast and cargo condition in order to quantify the contribution from vibration. The results from this project have been used for verification and further calibration of DNV’s existing empirical guidance. A test program has been designed for the purpose of evaluating the consequence in head seas for the Brazil to China trade. Full scale measurements from previous development projects of ore carriers and model tests have been utilized to convert the current model tests results into estimated full scale results for the 400 000 dwt vessels. It is further important to carefully consider how the vibrations are to be included in the design verification, and to develop a procedure for taking into account the vibrations which results in reasonable scantlings based on in-service experience with similar designs and trades. This procedure has been developed, and a structural verification has been carried out for the design. The final outcome of the model test was in line with previous experience and in overall agreement with DNV’s empirical guidance, showing a significant contribution from vibrations to the fatigue damage. The springing/whipping vibrations more than doubled the fatigue damage compared to fatigue evaluation of the isolated wave induced loading. The cargo condition vibrated relatively more than experienced on smaller vessels. Various sources to establish the wave conditions for the Brazil to China ore trade were used, and the different sources resulted in significant differences in the predicted fatigue life of the design.

The Effect of Bow Shape on the Springing/Whipping Response of a Large Ocean-Going Vessel: Investigated by an Experimental Method

2007 ◽  
Author(s):  
Gaute Storhaug ◽  
Torgeir Moan
Keyword(s):  
Fatigue Damage ◽  
Transfer Functions ◽  
Vertical Vibration ◽  
Full Scale ◽  
Relative Importance ◽  
High Frequency Response ◽  
Bow Flare ◽  
Excitation Mechanisms ◽  
The Difference ◽  
Wave Induced

Wave induced vibrations often referred to as springing and/or whipping increase the fatigue and extreme loading in ship hull girders. Both effects are disregarded in current ship rules. Various numerical codes exist for predicting the wave induced vibrations, but so far they are not considered reliable. Another means to investigate the importance of the high frequency response, although more resource demanding, is to carry out full scale measurements and/or model tests. Recently, full scale measurements of blunt ships have been carried out by DNV, and in this paper one of these ships was considered and tested in a towing tank to evaluate the additional fatigue damage due to the wave induced vibrations. Different excitation sources may excite the 2-node vertical vibration mode depending on ship design, and it is not straight forward to determine which is more important. The relative importance of the excitation mechanisms are investigated by two approaches in this paper. The first approach separates the whipping from springing to illustrate their relative importance based on basic theory in combination with model test results. The linear and second order transfer functions are utilized in this procedure. The second approach deals with the effect of the bow design on the additional fatigue damage. Three different bows were tested. The first bow design is identical to the real ship. The second bow design is a simplified version of the first one, by removing the bulb and flare. The third bow is fundamentally different from the two former blunt bows. Bow three is sharp pointed with a vertical sharp stem and vertical ship sides. The results indicate that the importance of whipping depends on the sea state, but that it is of similar importance as springing for the sea states that contributes most to the fatigue damage. Moreover, the difference in the additional fatigue damage due to wave induced vibrations for different bow shapes is moderate. This indicates that vessels with pointed bows and without pronounced bow flare, such as LNG vessels, may have a similar contribution from wave induced vibrations. Modern container vessels, which are more slender, but with pronounced bow flares should be further investigated.

Probabilistic Fatigue Assessment of a Mooring Line Based on Station-Keeping Trials in Ice

2021 ◽  
Author(s):  
Chana Sinsabvarodom ◽  
Bernt J. Leira ◽  
Wei Chai ◽  
Arvid Naess
Keyword(s):  
Fatigue Damage ◽  
Probabilistic Models ◽  
Full Scale ◽  
Mooring Line ◽  
Stress Range ◽  
Station Keeping ◽  
Probability Models ◽  
Line System ◽  
Fatigue Assessment ◽  
Rainflow Counting

Abstract The intention of this work is to perform a probabilistic fatigue assessment of a mooring line due to loads associated with the station-keeping of a ship in ice. In March 2017, the company Equinor (Statoil) conducted full-scale tests by means of station-keeping trials (SKT) in drifting ice in the Bay of Bothnia. The vessel Magne Viking was employed in order to represent a supply vessel equipped with a mooring line system, and the realtime loading during the full-scale measurement was recorded. The second vessel Tor Viking was serving as an ice breaker in order to maintain the physical ice management activities with different ice-breaking schemes, i.e. square updrift pattern, round circle pattern, circular updrift pattern and linear updrift pattern. The fatigue degradation corresponding to these different patterns were investigated. The peaks and valleys of the mooring tension are determined using the min peak prominence method. For the purpose of probabilistic fatigue assessment, the Rainflow-counting algorithm is applied to estimate the mooring stress range. Fatigue assessment based both on Rainflow counting and fitted probabilistic models were performed. For the latter, the stress range distributions from the observed data of mooring loads are fitted to various probability models in order to estimate the fatigue damage. It is found that the stress ranges represented by application of the Weibull distribution for the probabilistic fatigue approach provides results of the fatigue damage most similar to the Rainflow counting approach. Among the different scenarios of Ice management schemes, the circular updrift pattern provides the lowest magnitude of the fatigue degradation.

THE INFLUENCE OF CENTRE BOW LENGTH ON SLAMMING LOADS AND MOTIONS OF LARGE WAVE-PIERCING CATAMARANS

2021 ◽  
Vol 160 (A1) ◽  
Author(s):  
J R Shahraki ◽  
G A Thomas ◽  
M R Davis
Keyword(s):  
Wave Height ◽  
Full Scale ◽  
Bending Moments ◽  
Regular Waves ◽  
Large Wave ◽  
Towing Tank ◽  
Segmented Model ◽  
Model Experiments ◽  
Slamming Load ◽  
Wave Induced

The effect of various centre bow lengths on the motions and wave-induced slamming loads on wave-piercing catamarans is investigated. A 2.5 m hydroelastic segmented model was tested with three different centre bow lengths and towed in regular waves in a towing tank. Measurements were made of the model motions, slam loads and vertical bending moments in the model demi-hulls. The model experiments were carried out for a test condition equivalent to a wave height of 2.68 m and a speed of 20 knots at full scale. Bow accelerations and vertical bending moments due to slamming showed significant changes with the change in centre bow, the longest centre bow having the highest wave-induced loads and accelerations. The increased volume of displaced water which is constrained beneath the bow archways is identified as the reason for this increase in the slamming load. In contrast it was found that the length of centre bow has a relatively small effect on the heave and pitch motions in slamming conditions.

Calculation method of dynamic loads spectrum and effects on fatigue damage of a full-scale carbody for high-speed trains

2019 ◽  
Vol 58 (7) ◽  
pp. 1037-1056 ◽  
Author(s):  
Yaohui Lu ◽  
Wei Bi ◽  
Xing Zhang ◽  
Jing Zeng ◽  
Tianli Chen ◽  
...  
Keyword(s):  
Fatigue Damage ◽  
Calculation Method ◽  
High Speed ◽  
Full Scale ◽  
Dynamic Loads ◽  
High Speed Trains

Effect of Wave Induced Loading and Line Loading in Fully Stochastic Fatigue Assessment for West Africa FPSO

2004 ◽  
Author(s):  
T. H. Park ◽  
J. H. Lee ◽  
J. W. Cho ◽  
H. S. Shin
Keyword(s):  
West Africa ◽  
Fatigue Damage ◽  
Bending Moment ◽  
Ship Motions ◽  
Piping System ◽  
Site Specific ◽  
Fatigue Assessment ◽  
Loading Effects ◽  
Wave Induced ◽  
Side Shell

The fatigue assessment for a caisson of the interface between a caisson and a FPSO hull has been performed based on the FMS (Fatigue Methodology Specification) [1]. Investigation is focused on the various loading effects including inertia loading due to ship motions from a site specific swell, sea and line loading from the submerged caisson connected to the side shell of FPSO. The fully stochastic method was used for estimating damage levels from wave loadings. The component-based method was used for line loading effects. The two kinds of results from each case were combined the variance and mean period combination. For the inertia loading, it is shown that a hull deforming due to vertical bending moment is the principal effect for a fatigue assessment. For the line loading, it is found that the loading effect due to the submerged piping system connected to the side shell of FPSO is not significant for the fatigue of the side shell supporting structure. In conclusion, the fatigue damage from the site-specific swell is dominant effect among overall fatigue damage components of FPSO in the specific site condition of West Africa.

Fatigue Testing of Full Scale Girth Welded Pipes Under Variable Amplitude Loading

2012 ◽  
Author(s):  
Y.-H. Zhang ◽  
S. J. Maddox
Keyword(s):  
Fatigue Limit ◽  
Fatigue Damage ◽  
Fatigue Testing ◽  
Full Scale ◽  
Variable Amplitude Loading ◽  
Variable Amplitude ◽  
Fatigue Design ◽  
Miner’S Rule ◽  
Miner's Rule ◽  
Loading Spectrum

In the fatigue design of steel catenary risers there are concerns regarding the fatigue damage to girth welds from low stresses, below the constant amplitude fatigue limit, in the loading spectrum and the validity of Miner’s cumulative damage rule. In both cases there is increasing evidence that current design methods can be non-conservative. These fundamental issues were addressed in a recent JIP. A key feature was development of the resonance fatigue testing rigs to enable them to test full-scale pipes under variable amplitude loading. Such tests were performed under a loading spectrum representative of that experienced by some risers, with many tests lasting over 100 million cycles to investigate the fatigue damage due to small stresses as well as the validity of Miner’s rule. However, the resonance rigs are only capable of producing spectrum loading by gradually increasing or decreasing the applied load, whereas more ‘spiky’ random load sequences may be relevant in practice. Therefore the programme also included fatigue tests in conventional testing machines on strip specimens cut from pipes to compare the two types of loading sequence. This paper presents the results of these tests, conclusions drawn and recommendations for changes to current fatigue design guidance for girth welded pipes regarding the definition of the fatigue limit, allowance for the damaging effect of low stresses and the validity of Miner’s rule.

Assessment of Wave-induced Fatigue Damage to Marine Pipelines in Intermediate Seas

2016 ◽  
Vol 26 (4) ◽  
pp. 385-391 ◽  
Author(s):  
Abbas Yeganeh-Bakhtiary ◽  
Naser Shabakhty ◽  
Ali Valipour ◽  
Hamzeh Gol-Zaroudi
Keyword(s):  
Fatigue Damage ◽  
Wave Induced
Sign in / Sign up

Export Citation Format

Share Document