scholarly journals Instability of free interfaces in premixed flame propagation

2021 ◽  
Vol 14 (2) ◽  
pp. 575-596
Author(s):  
Claude-Michel Brauner ◽  
◽  
Luca Lorenzi ◽  
◽  
Keyword(s):  
Flame Propagation ◽  
Premixed Flame ◽  
Free Interfaces

Numerical Simulation of Premixed Propane/Air Flame Propagation Using a Dynamically Thickened Flame Approach

2013 ◽  
Vol 444-445 ◽  
pp. 1574-1578 ◽  
Author(s):  
Hua Hua Xiao ◽  
Zhan Li Mao ◽  
Wei Guang An ◽  
Qing Song Wang ◽  
Jin Hua Sun
Keyword(s):  
Numerical Simulation ◽  
Flame Propagation ◽  
Numerical Study ◽  
Vortex Motion ◽  
Combustion Process ◽  
Single Step ◽  
Premixed Combustion ◽  
Premixed Flame ◽  
Flame Surface ◽  
Arrhenius Kinetics

A numerical study of premixed propane/air flame propagation in a closed duct is presented. A dynamically thickened flame (TF) method is applied to model the premixed combustion. The reaction of propane in air is taken into account using a single-step global Arrhenius kinetics. It is shown that the premixed flame undergoes four stages of dynamics in the propagation. The formation of tulip flame phenomenon is observed. The pressure during the combustion process grows exponentially at the finger-shape flame stage and then slows down until the formation of tulip shape. After tulip formation the pressure increases quickly again with the increase of the flame surface area. The vortex motion behind the flame front advects the flame into tulip shape. The study indicates that the TF model is quite reliable for the investigation of premixed propane/air flame propagation.

Turbulent premixed flame propagation in a cylindrical vessel

1996 ◽  
Vol 26 (1) ◽  
pp. 365-371 ◽  
Author(s):  
M. Fairweather ◽  
S.S. Ibrahim ◽  
H. Jaggers ◽  
D.G. Walker
Keyword(s):  
Flame Propagation ◽  
Cylindrical Vessel ◽  
Premixed Flame ◽  
Turbulent Premixed Flame ◽  
Turbulent Premixed

Fuel wall film effects on premixed flame propagation, quenching and emission

2018 ◽  
Vol 21 (6) ◽  
pp. 1055-1066 ◽  
Author(s):  
Mingyuan Tao ◽  
Haiwen Ge ◽  
Brad VanDerWege ◽  
Peng Zhao
Keyword(s):  
Flame Propagation ◽  
Direct Injection ◽  
Flame Structure ◽  
Three Dimensional ◽  
Premixed Flame ◽  
Practical Significance ◽  
Detailed Chemistry ◽  
Rich Mixture ◽  
Wall Film ◽  
Flame Quenching

The formation of fuel wall film is a primary cause for efficiency loss and emissions of unburnt hydrocarbons and particulate matters in direct injection engines, especially during cold start. When a premixed flame propagates toward a wall film of liquid fuel, flame structure and propagation could be fundamentally affected by the vaporization flux and the induced thermal and concentration stratifications. It is, therefore, of both fundamental and practical significance to investigate the consequent effect of a wall film on flame quenching. In this work, the interaction of a laminar premixed flame and a fuel wall film has been studied based on one-dimensional direct numerical simulation with detailed chemistry and transport. The mass and energy balance at the wall film interface have been implemented as boundary condition to resolve vaporization. Parametric studies are further conducted with various initial temperatures of 600–800 K, pressures of 7–15 atm, fuel film and wall temperatures of 300–400 K. By comparing the cases with an isothermal dry wall, it is found that the existence of a wall film always promotes flame quenching and causes more emissions. Although quenching distance can vary significantly among conditions, the local equivalence ratio at quenching is largely constant, suggesting the dominant effects of rich mixture and rich flammability limit. By further comparing constant volume and constant pressure conditions, it is observed that pressure and boiling point variation dominate the vaporization boundary layer development and flame quenching, which further suggests that increased pressure during compression stroke in engines can significantly suppress film vaporization. Emissions of unburnt hydrocarbon, soot precursor and low-temperature products before and after flame quenching are also investigated in detail. The results lead to useful insights on the interaction of flame propagation and wall film in well-controlled simplified configurations and shed light on the development of wall film models in three-dimensional in-cylinder combustion simulation.

On scalar dissipation and partially premixed flame propagation

2003 ◽  
Vol 175 (4) ◽  
pp. 649-664 ◽  
Author(s):  
K.A. Watson ◽  
K.M. Lyons ◽  
J.M. Donbar ◽  
C.D. Carter
Keyword(s):  
Flame Propagation ◽  
Premixed Flame ◽  
Scalar Dissipation ◽  
Partially Premixed ◽  
Partially Premixed Flame

Premixed Flame Propagation in Channels of Varying Width

2010 ◽  
Vol 70 (8) ◽  
pp. 3287-3318 ◽  
Author(s):  
Hazem El-Rabii ◽  
Guy Joulin ◽  
Kirill A. Kazakov
Keyword(s):  
Flame Propagation ◽  
Premixed Flame
Sign in / Sign up

Export Citation Format

Share Document