scholarly journals DIRECT SHEAR TESTS WITH EVALUATION OF VARIABLE SHEARING AREA / TIESIOGINIO KIRPIMO BANDYMAI ĮVERTINANT KINTAMĄ KERPAMĄJĮ PLOTĄ

2014 ◽  
Vol 6 (5) ◽  
pp. 499-503 ◽  
Author(s):  
Šarūnas Skuodis ◽  
Tadas Tamošiūnas
Keyword(s):  
Test Procedure ◽  
Horizontal Displacement ◽  
Strength Properties ◽  
Direct Shear ◽  
Shear Tests ◽  
Angle Of Internal Friction ◽  
Testing Procedures ◽  
Direct Shear Tests ◽  
Tangential Stresses ◽  
Soil Shear Strength

Investigations of soil shear strength properties for Baltic Sea shore sand along Klaipėda city are presented. Investigated sand angle of internal friction (φ) and cohesion (c) is determined via two different direct shear tests procedures. First procedure is standard and ordinary in geotechnical practice, when direct shear test is provided using constant shearing area A0. Second test procedure is different because shearing area according to horizontal displacement each test second is recalculated. This recalculated shearing area author’s call corrected shearing area A. Obtained normal and tangential stresses’ difference via two different testing procedures was 10%. Šiame straipsnyje yra pristatyta idėja, kaip įvertinti grunto kerpamojo stiprumo parametrus, t. y. vidinės trinties kampą (φ) ir sankibą (c). Eksperimentiniams bandymams atlikti buvo naudotas Baltijos jūros pakrantės smėlinis gruntas ties Klaipėda. Grunto tiesioginio kirpimo bandymai atlikti dviem skirtingomis kirpimo metodikomis. Pirmoji metodika yra standartizuota ir įprasta atliekant geotechninius tyrimus, kai kerpamasis plotas yra vertinamas kaip pastovus plotas A. Antroji kirpimo metodika skiriasi nuo pirmosios grunto kirpimo ploto įvertinimu. Antrojoje metodikoje grunto kerpamasis plotas yra perskaičiuojamas tiesiogiai pagal horizontalųjį poslinkį. Horizontaliojo poslinkio indikatoriaus rodmenys yra registruojami kiekvieną sekundę, todėl kas sekundę yra perskaičiuojamas vis naujas grunto kerpamasis plotas. Atliekant bandymus skirtingomis metodikomis, nustatytas vertikalaus normalinio ir tangentinio įtempių skirtumas, kuris apytiksliai lygus 10 %.

scholarly journals Direct Shear Test: Normal and Tangential Stresses Evaluation According to Constant and Variable Shearing Area

2016 ◽  
Author(s):  
Šarūnas Skuodis ◽  
Arnoldas Norkus
Keyword(s):  
Direct Shear Test ◽  
Shear Test ◽  
Test Procedure ◽  
Horizontal Displacement ◽  
Strength Properties ◽  
Direct Shear ◽  
Angle Of Internal Friction ◽  
Testing Procedures ◽  
Direct Shear Tests ◽  
Tangential Stresses

Investigations of soil shear strength properties for Baltic Sea shore sand along Klaipėda city is presented. Investigated sand angle of internal friction (φ) and cohesion (c) is determined via two different direct shear tests procedures. First procedure is standard and ordinary in geotechnical practice, when direct shear test is provided using constant shearing area. Second test procedure is different because shearing area according to horizontal displacement each test second is recalculated and reducing during horizontal movement. According to these two different testing procedures provided comparison of normal and tangential stresses.

scholarly journals Effects of Clay and Moisture Content on Direct Shear Tests for Clay-Sand Mixtures

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Muawia A. Dafalla
Keyword(s):  
Internal Friction ◽  
Moisture Content ◽  
Direct Shear Test ◽  
Shear Test ◽  
Horizontal Displacement ◽  
Direct Shear ◽  
Shear Tests ◽  
Angle Of Internal Friction ◽  
Direct Shear Tests ◽  
Moisture Contents

The direct shear test using shear box is commonly recommended by practicing geotechnical engineers to obtain the cohesion and angle of internal friction for granular soils. The clay liners involve sand as a main constituent with added clay of variable proportions. This research aims at investigating the reliability of using the direct shear test for different clay contents and different moisture contents using an adequate shearing strain. These factors were found to affect the bilinear trends of shear force versus horizontal displacement profile as well as vertical displacement versus horizontal displacement curves. The cohesion of the mixture was found to increase consistently with the increase of clay content. Increase in moisture content was found to cause a drop in both cohesion and angle of internal friction. These changes are not independent of the density state of clay-sand mixtures. Standard compaction properties for a range of clay-sand mixtures were investigated. This work provides the general trends expected in direct shear tests for clay-sand mixtures of variable clay and moisture contents.

scholarly journals Mechanical Behaviour of Reinforced Sand with Natural Curauá Fibers through Full Scale Direct Shear Tests

2019 ◽  
Vol 92 ◽  
pp. 12003
Author(s):  
Leila Maria Coelho de Carvalho ◽  
Michelé Dal Toé Casagrande
Keyword(s):  
Shear Strength ◽  
Sandy Soil ◽  
Soil Reinforcement ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Shear Tests ◽  
Strength Parameters ◽  
Direct Shear Tests ◽  
Soil Shear Strength ◽  
Curaua Fibers

Inclusion of natural fibers (sisal, curauá, coco fiber and others) for soil improvement has been the study object in diverse geotechnical areas and it is a topic of growing interest, within the research area of new geotechnical materials. The state of the art in this subject highlights excellent results as soil strength parameters improve and post-cracking strength (toughness) increase. Soil reinforcement technique with fibers is established in the technology of composite materials, this being a combination of two or more materials presenting properties that the component materials do not possess on their own. The aim of this paper is to study the mechanical behaviour of sand-fiber composite by inserting natural curauá fibers into a sandy matrix, with different fiber contents. The fibers were randomly distributed in the soil mass. The experimental program included physical and mechanical characterization of the composites, using full-scale direct shear tests, with samples measuring 30 x 30 cm and 15 cm high. Direct shear tests were carried out using fibers with 25 mm length and 0.5 and 0.75% fiber content (relative to the soil dry weight). The specimens also presented a relative density of 50% and moisture content of 10%. It was sought to establish a pattern behaviour so that the addition of curauá fiber influence can be explained, thus, comparing with the sandy soil shear strength parameters. Inclusion of natural curauá fibers as soil reinforcement presented satisfactory results, as an increase in the soil shear strength parameters was observed when compared with sandy soil results.

scholarly journals Non-cohesive Soil Direct Shear Strength Affected with Hydrostatic Pressure

2017 ◽  
Vol 9 (5) ◽  
pp. 520-523
Author(s):  
Tadas Tamošiūnas ◽  
Šarūnas Skuodis
Keyword(s):  
Hydrostatic Pressure ◽  
Baltic Sea ◽  
Research Work ◽  
Cohesive Soil ◽  
Pressure Change ◽  
Direct Shear ◽  
Angle Of Internal Friction ◽  
Testing Procedures ◽  
Direct Shear Tests ◽  
Shearing Strength

This paper presents first results of non­cohesive soil direct shear tests with hydrostatic pressure. To reach this aim, it was chosen the Baltic Sea Klaipėda sand, due to granulometry composition and particles shape. According to this, investigated Baltic Sea sand can be called Lithuanian standard sand for scientific testing. Analysis of results revealed, that when it is increased hydrostatic pressure, the shearing strength is also increasing. Comparing air­ dry sand results with fully saturated sand and affected with 100 kPa of hydrostatic pressure, the angle of internal friction increased for 21,24%. Meanwhile, the cohesion was not changing so dramatically according to hydrostatic pressure change. Obtained results allows to proceed this research work more detailed with different loading types, testing procedures and hydrostatic pressures.

Effect of Sample Size on TDA Shear Strength Parameters in Direct Shear Tests

2020 ◽  
Vol 2674 (9) ◽  
pp. 1110-1119 ◽  
Author(s):  
Khaled Zahran ◽  
Hany El Naggar
Keyword(s):  
Shear Strength ◽  
Shear Test ◽  
Direct Shear ◽  
Shear Strength Parameters ◽  
Shear Tests ◽  
Strength Parameters ◽  
Angle Of Internal Friction ◽  
Direct Shear Tests ◽  
Shear Box ◽  
Box Dimensions

Tire-derived aggregate (TDA), a relatively new construction material, has been gaining acceptance as a backfill material for embankments, trenches, and earth-retaining structures because of its lightweight and excellent geotechnical properties. Type A TDA has a basic geometric shape, with particles approximately 12 to 100 mm in size. As a result of the simplicity and accuracy of the direct shear test, most laboratories choose this test in preference to more complex tests. However, TDA requires large-scale direct shear apparatus because of the consistently large size of its particles, and few facilities own this type of apparatus. Depending on the shear box dimensions, the aspect ratio of the particle size to the box dimensions may lead to variations in the shear strength results of the sample being evaluated. This research focuses on studying the effect of TDA sample size on the shear strength results of direct shear tests by using five different shear box sizes. The findings show that the angle of internal friction increases slightly as the dimensions of the shear box decrease. It was found that the maximum variation in the angle of internal friction and the cohesion results of the different shear boxes was only 1.9° and 2.4 kPa, respectively. These differences should be taken into consideration when TDA shear test results are used in the geotechnical design. It is recommended that a shear box with an aspect ratio (W/Dmax) greater than or equal to 4 should be used when evaluating the shear strength parameters of TDA.

scholarly journals Sand- and Clay-Photocured-Geomembrane Interface Shear Characteristics Using Direct Shear Test

2021 ◽  
Vol 13 (15) ◽  
pp. 8201
Author(s):  
Lihua Li ◽  
Han Yan ◽  
Henglin Xiao ◽  
Wentao Li ◽  
Zhangshuai Geng
Keyword(s):  
Soil Surface ◽  
Friction Angle ◽  
Direct Shear ◽  
Tensile Crack ◽  
Shear Tests ◽  
Interface Shear ◽  
Direct Shear Tests ◽  
Carbon Black Powder ◽  
Shear Characteristics ◽  
Impermeable Layer

It is well known that geomembranes frequently and easily fail at the seams, which has been a ubiquitous problem in various applications. To avoid the failure of geomembrane at the seams, photocuring was carried out with 1~5% photoinitiator and 2% carbon black powder. This geomembrane can be sprayed and cured on the soil surface. The obtained geomembrane was then used as a barrier, separator, or reinforcement. In this study, the direct shear tests were carried out with the aim to investigate the interfacial characteristics of photocured geomembrane–clay/sand. The results show that a 2% photoinitiator has a significant effect on the impermeable layer for the photocured geomembrane–clay interface. As for the photocured geomembrane–sand interface, it is reasonable to choose a geomembrane made from a 4% photoinitiator at the boundary of the drainage layer and the impermeable layer in the landfill. In the cover system, it is reasonable to choose a 5% photoinitiator geomembrane. Moreover, as for the interface between the photocurable geomembrane and clay/sand, the friction coefficient increases initially and decreases afterward with the increase of normal stress. Furthermore, the friction angle of the interface between photocurable geomembrane and sand is larger than that of the photocurable geomembrane–clay interface. In other words, the interface between photocurable geomembrane and sand has better shear and tensile crack resistance.

scholarly journals Rapid prototyping of geosynthetic interfaces: Investigation of peak strength using direct shear tests

2017 ◽  
Vol 45 (6) ◽  
pp. 674-687 ◽  
Author(s):  
Gary John Fowmes ◽  
Neil Dixon ◽  
Liwei Fu ◽  
Catalin Alexandru Zaharescu
Keyword(s):  
Rapid Prototyping ◽  
Peak Strength ◽  
Direct Shear ◽  
Shear Tests ◽  
Direct Shear Tests
Sign in / Sign up

Export Citation Format

Share Document