scholarly journals ANALYSIS OF ENERGY DEMAND FOR LOW-ENERGY MULTI-DWELLING BUILDINGS OF DIFFERENT CONFIGURATION / SKIRTINGOS KONFIGŪRACIJOS MAŽAENERGIŲ DAUGIABUČIŲ PASTATŲ ENERGIJOS POREIKIŲ TYRIMAS

2014 ◽  
Vol 6 (4) ◽  
pp. 414-420 ◽  
Author(s):  
Giedrė Streckienė ◽  
Elena Polonis
Keyword(s):  
Energy Demand ◽  
Energy Savings ◽  
Energy Performance ◽  
Primary Energy ◽  
Low Energy ◽  
Single Family ◽  
Energy Performance Of Buildings ◽  
New Energy ◽  
Concrete Blocks ◽  
Family House

To meet the goals established by Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings, the topics of energy efficiency in new and old buildings must be solved. Research and development of new energy solutions and technology are necessary for increasing energy performance of buildings. Three low-energy multi-dwelling buildings have been modelled and analyzed in the presented study. All multi-dwelling houses are made of similar single-family house cells. However, multi-dwelling buildings are of different geometry, flat number and height. DesignBuilder software was used for simulating and determining heating, cooling and electricity demand for buildings. Three different materials (silicate, ceramic and clay concrete blocks) as bearing constructions of external walls have been analyzed. To decrease cooling demand for buildings, the possibility of mounting internal or external louvers has been considered. Primary energy savings for multi-dwelling buildings using passive solar measures have been determined. Norint pasiekti Europos Sąjungos direktyvos 2010/31/EB tikslus dėl pastatų energinio naudingumo, reikia spręsti energijos efektyvumo klausimus naujų ir esamų pastatų srityje. Naujų energinių sprendinių ir technologijų tyrimai bei plėtra būtini norint padidinti pastatų energinį naudingumą. Šiame tyrime modeliuojami ir analizuojami trys mažaenergiai daugiabučiai pastatai. Visi jie sudaryti iš vienodo dydžio butų, tačiau pastatai tarpusavyje skiriasi geometrija, butų skaičiumi ir aukštingumu. Siekiant nustatyti ir išnagrinėti pastatų šilumos, vėsos ir elektros energijos poreikius, naudotasi DesignBuilder programa. Visų daugiabučių pastatų atvejais nagrinėjamos trys skirtingos išorės sienų laikančiųjų konstrukcijų medžiagos: silikatiniai, keraminiai ir keramzitbetonio blokeliai. Siekiant sumažinti vėsos poreikį pastatuose taip pat buvo analizuojama galimybė sumontuoti vidines arba išorines žaliuzes. Nustatyti sutaupytieji pirminės energijos kiekiai daugiabučių pastatų atvejams taikant pasyviąsias apsaugos nuo saulės priemones.

The Statistical Verification of Significance of Airtightness and Energy Performance

2015 ◽  
Vol 789-790 ◽  
pp. 1181-1184
Author(s):  
Michal Kraus ◽  
Kateřina Kubeková ◽  
Darja Kubečková
Keyword(s):  
Energy Demand ◽  
Energy Performance ◽  
Primary Energy ◽  
Building Envelope ◽  
Key Factors ◽  
Energy Performance Of Buildings ◽  
Energy Efficient Buildings ◽  
Statistical Verification ◽  
Low Energy Consumption

The main objective of the paper is to confirm or exclude a statistically significant impact of airtightness on the energy performance of buildings. Energy performance of buildings is characterized by a specific energy demand for heating and specific total primary energy. Airtightness is one of the key factors of energy efficient buildings. The quality of airtight building envelope except for low energy consumption also minimizes the risk of damage to the structure associated with the spread of the heat and water vapor in the structure.

Analysis of Energy and Internal Environment Improvements in a Single Family House

2014 ◽  
Vol 899 ◽  
pp. 3-6 ◽  
Author(s):  
Martin Kamenský ◽  
Anna Vaskova ◽  
Marián Vertaľ
Keyword(s):  
Energy Efficiency ◽  
Energy Savings ◽  
Building Design ◽  
Low Energy ◽  
Internal Environment ◽  
Single Family ◽  
Cooling Period ◽  
Heating And Cooling ◽  
Family House

The next step in energy efficiency building design focus on near energy zero buildings. To design such buildings is important to understand how people use low energy building and to find reserves in energy. The paper presents an analysis of reserves in a family house. The analysis is done with simulations of different design and operation solutions based on knowledge from in situ measurements. Results show there are reserves in the heating and cooling period of year, which can lead to further energy savings of up to 15% and internal environment improvements.

scholarly journals Energy modeling of a single-family house with photovoltaics for the Russian Federation

2019 ◽  
Vol 110 ◽  
pp. 01016
Author(s):  
Dmitry Shiryaev ◽  
Andrey Benuzh
Keyword(s):  
Russian Federation ◽  
Energy Demand ◽  
Energy Performance ◽  
Climatic Conditions ◽  
Energy Modeling ◽  
The Arctic ◽  
Single Family ◽  
Climate Conditions ◽  
The Russian Federation ◽  
Family House

Residential sector in Russia makes up a significant part in the total energy demand of the country. The article demonstrates sensible energy saving potential in case of a single-family house in different climate conditions of the Russian Federation. Modern tools of building energy performance simulation and renewable energy modeling demonstrated a significant effect of the complex energy efficiency technologies, such as using of modern highly insulated constructional materials, installation of efficient heating, ventilation and air conditioning systems, and implementation of sustainable energy. Annual energy use dramatically declines in comparing with buildings built according to outdated technologies. In particular, the use of photovoltaic modules can meet more than half of the building's energy demand and ensure the autonomy of a building during the warm season. These values differ depending on the location due to the large territory and diverse climatic conditions from the Mediterranean in the south to the Arctic ones in the north.

scholarly journals Nearly Zero Energy Standard for Non-Residential Buildings with High Energy Demands—An Empirical Case Study Using the State Related Properties of Bavaria

2017 ◽  
Author(s):  
Michael Keltsch ◽  
Werner Lang ◽  
Thomas Auer
Keyword(s):  
Energy Demand ◽  
Energy Savings ◽  
Residential Buildings ◽  
Energy Performance ◽  
High Energy ◽  
Primary Energy ◽  
The State ◽  
Zero Energy ◽  
Primary Energy Demand ◽  
New Buildings

The Energy Performance of Buildings Directive 2010 calls for the Nearly Zero Energy Standard for new buildings from 2021 onwards: Buildings using “almost no energy” are powered by renewable sources or energy produced by the building itself. For residential buildings, this ambitious new standard has already been reached. But for other building types this goal is still far away. The potential of these buildings to meet a Nearly Zero Energy Standard was investigated by analyzing ten case studies representing non-residential buildings with different uses. The analysis shows that the primary characteristics common to critical building types are a dense building context with a very high degree of technical installation (such as hospital, research and laboratory buildings). The large primary energy demand of these types of buildings cannot be compensated by building and property-related energy generation including off-site renewables. If the future Nearly Zero Energy Standard were to be defined with lower requirements because of this, the state related properties of Bavaria suggest that the real potential energy savings available in at least 85% of all new buildings would be insufficiently exploited. Therefore, it would be useful to instead individualize the legal energy verification process for new buildings to distinguish critical building types such as laboratories and hospitals.

scholarly journals Energy, Economic, and Environmental Performance of a Single-Family House in Chile Built to Passivhaus Standard

2021 ◽  
Vol 13 (3) ◽  
pp. 1199
Author(s):  
Camilo Bravo-Orlandini ◽  
José M. Gómez-Soberón ◽  
Claudia Valderrama-Ulloa ◽  
Francisco Sanhueza-Durán
Keyword(s):  
Energy Consumption ◽  
Environmental Performance ◽  
Energy Demand ◽  
Energy Use ◽  
Initial Step ◽  
Energy Performance ◽  
Primary Energy ◽  
Single Family ◽  
Passive Strategies ◽  
Heating Energy Demand

The energy consumption of buildings accounts for 22% of total global energy use and 13% of global greenhouse gas emissions. In this context, this study aims to evaluate the energy, economic, and environmental performance of housing in Chile built according to the Passivhaus (PH) standard. The standard was applied to housing in eight representative climate zones with a single-family residence as reference. The analysis incorporated passive strategies, which are considered as pillars of the PH. The energy performance was analyzed using the Passive House Planning Package software (PHPP), version 9.6a. The results showed that when every passive strategy is implemented, the heating energy demand decreases by 93%, while the refrigeration demand is nonexistent. These results were achieved through a 37% increase in the overall initial budget investment, which will be amortized over an 11-year period. In this way, the primary energy consumption is reduced by 32% and, correspondingly, CO2 emissions are reduced by 39%. In modern Chile, it is difficult (but not impossible) to incorporate PH. However, governmental programs and aids could represent an initial step. Therefore, this research will help to identify strategies for incorporating PH in Chile, with the aim of improving the energy performance of housing.

scholarly journals Nearly Zero Energy Standard for Non-Residential Buildings with High Energy Demands—An Empirical Case Study Using the State Related Properties of Bavaria

2017 ◽  
Author(s):  
Michael Keltsch ◽  
Werner Lang ◽  
Thomas Auer
Keyword(s):  
Energy Demand ◽  
Energy Savings ◽  
Residential Buildings ◽  
Energy Performance ◽  
High Energy ◽  
Primary Energy ◽  
The State ◽  
Zero Energy ◽  
Primary Energy Demand ◽  
New Buildings

The Energy Performance of Buildings Directive 2010 calls for the Nearly Zero Energy Standard for new buildings from 2021 onwards: Buildings using “almost no energy” are powered by renewable sources or energy produced by the building itself. For residential buildings, this ambitious new standard has already been reached. But for other building types this goal is still far away. The potential of these buildings to meet a Nearly Zero Energy Standard was investigated by analyzing ten case studies representing non-residential buildings with different uses. The analysis shows that the primary characteristics common to critical building types are a dense building context with a very high degree of technical installation (such as hospital, research and laboratory buildings). The large primary energy demand of these types of buildings cannot be compensated by building and property-related energy generation including off-site renewables. If the future Nearly Zero Energy Standard were to be defined with lower requirements because of this, the state related properties of Bavaria suggest that the real potential energy savings available in at least 85% of all new buildings would be insufficiently exploited. Therefore, it would be useful to instead individualize the legal energy verification process for new buildings to distinguish critical building types such as laboratories and hospitals.

scholarly journals The thermomodernization of a single family house located in the Świętokrzyskie Mountains – a case study

2019 ◽  
Vol 28 (3) ◽  
pp. 394-404
Author(s):  
Urszula Pawlak ◽  
Marcin Pawlak
Keyword(s):  
Renewable Energy ◽  
Tap Water ◽  
Renewable Energy Sources ◽  
Energy Performance ◽  
Primary Energy ◽  
Energy Sources ◽  
Single Family ◽  
Central Heating ◽  
Family House

The paper presents the energy performance of a single-family house located in Domaszowice, the Kielce poviat. The analyzed object has been put into use in 2010 year. Due to the devices using non-renewable energy sources, installed in the building for the needs of hot tap water and central heating, for servicing, which human presence is necessary, two thermomodernizations were performed. The purpose of the calculations was to indicate the financial benefi ts, i.e. to reduce the costs of maintaining the home and to provide its residents with proper comfort of use of the building, bearing in mind also the health aspect. Changes have been proposed to reduce the demand for non-renewable primary energy of EP using renewable energy sources. As a result, the energy-efficient building that meets WT 2017 was obtained. The Certo 2015 program was used in the analysis.

scholarly journals Case Study of Thermal Diagnostics of Single-Family House in Temperate Climate

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4549 ◽  
Author(s):  
Aleksandra Specjał ◽  
Aleksandra Lipczyńska ◽  
Maria Hurnik ◽  
Małgorzata Król ◽  
Agnieszka Palmowska ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Ventilation System ◽  
Energy Performance ◽  
Primary Energy ◽  
Building Envelope ◽  
Hot Water ◽  
Temperate Climate ◽  
Normative Values ◽  
Single Family ◽  
Family House

Reduction of the primary energy consumption is a crucial challenge for the building sector due to economic and environmental issues. Substantial savings could be achieved within the household. In this paper, we investigate the energy performance of a single-family house located in the temperate climate. The assessment is based on the comprehensive thermal diagnostic of the building performed on-site and via computational analyses. The on-site measurements included diagnostics of the building envelope, heat source, heating and domestic hot water system, ventilation system, and indoor environmental quality. Analyses confirmed that the studied building, which was built in 2008, meets the legislation requirements for the primary energy usage at that time and nowadays. However, results show discrepancies between energy performance obtained through on-site measurements and computational methods following regulations. Partially, discrepancies are a result of differences on normative values and how the building is operated in practice. It is also showed how important the role in the assessment of energy consumption through measurements is played by the measurement period.

scholarly journals Minimal Monitoring of Improvements in Energy Performance after Envelope Renovation in Subsidized Single Family Housing in Madrid

2020 ◽  
Vol 13 (1) ◽  
pp. 235
Author(s):  
Fernando Martín-Consuegra ◽  
Fernando de Frutos ◽  
Ignacio Oteiza ◽  
Carmen Alonso ◽  
Borja Frutos
Keyword(s):  
Energy Efficiency ◽  
Energy Savings ◽  
Low Cost ◽  
Energy Performance ◽  
Quality Parameters ◽  
Urban Setting ◽  
Single Family ◽  
Nineteen Fifties ◽  
Environment Quality ◽  
Urban Complex

This study quantified the improvement in energy efficiency following passive renovation of the thermal envelope in highly inefficient residential complexes on the outskirts of the city of Madrid. A case study was conducted of a single-family terrace housing, representative of the smallest size subsidized dwellings built in Spain for workers in the nineteen fifties and sixties. Two units of similar characteristics, one in its original state and the other renovated, were analyzed in detail against their urban setting with an experimental method proposed hereunder for simplified, minimal monitoring. The dwellings were compared on the grounds of indoor environment quality parameters recorded over a period covering both winter and summer months. That information was supplemented with an analysis of the energy consumption metered. The result was a low-cost, reasonably accurate measure of the improvements gained in the renovated unit. The monitoring output data were entered in a theoretical energy efficiency model for the entire neighborhood to obtain an estimate of the potential for energy savings if the entire urban complex were renovated.

Sign in / Sign up

Export Citation Format

Share Document