scholarly journals BIOFUELS DRYING PROCESS EFFICIENCY RESEARCH / BIOKURO DŽIOVINIMO PROCESO EFEKTYVUMO TYRIMAI

2013 ◽  
Vol 5 (6) ◽  
pp. 609-614
Author(s):  
Osvaldas Šlepikas ◽  
Audrius Čereška
Keyword(s):  
Positive Impact ◽  
Ultrasonic Transducer ◽  
Process Efficiency ◽  
Convective Drying ◽  
Drying Process ◽  
Wood Pellets ◽  
Drying Time ◽  
Hot Air ◽  
Special Stand ◽  
Experimental Rig

The paper deals with biofuel drying process efficiency opportunities.Research was carried out with a special stand and performingexperiments. Experimental rig consists of an ultrasonic generator,ultrasonic transducer, a drying chamber and the humidity,temperature gauge. Tests were used for wood pellets. During theexperiment, they were irrigated with water, dried with hot air andadditionally exposed to different frequency ultrasonic vibrations.The tests results have showed that the convective drying processis combined with the ultrasonic vibrations, the drying time isreduced, which means a positive impact on the ultrasonic process.Studies have confirmed that the effectiveness of convectivedrying method combined with operating ultrasonic vibrationsincreases. Santrauka Straipsnyje nagrinėjamos biokuro džiovinimo proceso efektyvumo didinimo galimybės. Tyrimams atlikti sukurtas specialus stendas ir sudaryta eksperimento atlikimo metodika. Eksperimentinį stendą sudaro ultragarsinis generatorius, ultragarsinis keitiklis, džiovinimo kamera ir drėgmės, temperatūros matuokliai. Buvo tiriamos medžio granulės. Eksperimento metu jos buvo drėkinamos vandeniu, džiovinamos karštu oru ir papildomai veikiamos skirtingo dažnio ultragarsiniais virpesiais. Atlikus bandymus, rezultatai parodė, kad, veikiant konvekcinio džiovinimo procesą ultragarsiniais virpesiais, džiovinimo laikas sutrumpėja. Tai reiškia teigiamą ultragarso poveikį procesui. Tyrimais patvirtintas konvekcinio džiovinimo metodo efektyvumo, papildomai veikiant ultragarsiniais virpesiais, padidėjimas.

scholarly journals Kinetic parameters identification of conductive enhanced hot air drying process of food waste

2020 ◽  
pp. 223-223
Author(s):  
Mihailo Milanovic ◽  
Mirko Komatina ◽  
Ivan Zlatanovic ◽  
Nebojsa Manic ◽  
Dragi Antonijevic
Keyword(s):  
Food Industry ◽  
Convective Drying ◽  
Diffusivity Coefficient ◽  
Drying Method ◽  
Drying Process ◽  
Air Velocity ◽  
Drying Time ◽  
Hot Air ◽  
Air Temperatures ◽  
Drying Curves

The efficient utilization of waste from food industry is possible after thermal treatment of the material. This treatment should be economically feasible and compromise the energy efficient drying process. The main goal of this investigation is to determine drying characteristics of nectarine pomace as a waste from food industry. The measurements were performed in an experimental dryer by combined conductive-convective drying method with disk-shaped samples of 5, 7 and 10mm thickness and 100 mm in diameter at the air temperatures of 30, 40, 50, 60 and 70oC, hot plate temperatures of 50, 60 an 70oC and air velocity of 1.5 m/s. The drying curves were compared to a few semi-theoretical mathematical models. The Logarithmic model showed the best correspondence. On the basis of experiments, it is determined that the drying process takes place in a falling rate period and it is accepted that the main mechanism of moisture removal is diffusion. The effective coefficient of diffusion was determined using experimental results by calculating the slope of the drying curves. Drying time and equilibrium moisture are determined for each experiment. Analysis of drying curves showed that the conductive-enhanced drying method reduces drying times and increases the diffusivity coefficient. The character of drying rate curves for conductive-enhanced drying was analyzed and compared with pure convective drying of nectarine pomace.

Quality Assessment and Mathematical Modeling of Hot-Air Convective Drying of Persimmon (Diospyros kaki L.) Fruit

2017 ◽  
Vol 13 (7) ◽  
Author(s):  
Claudia Giovagnoli-Vicuña ◽  
Nelson O. Moraga ◽  
Vilbett Briones-Labarca ◽  
Pablo Pacheco-Pérez
Keyword(s):  
Quality Parameters ◽  
Time Function ◽  
Convective Drying ◽  
Diospyros Kaki ◽  
Drying Process ◽  
Temperature Function ◽  
Persimmon Fruit ◽  
Hot Air ◽  
Volume Method ◽  
Good Agreement

Abstract The influence of drying on the color, porosity, shrinkage and moisture of persimmon fruit during convective drying was determined by computer vision. The experiments were performed with persimmon fruit that were cut into slab 20 × 20 mm, which were arranged into a bigger slab, 60 × 60 mm. Drying process was carried out at 60 °C. Noticeable changes in quality parameters (color, porosity and shrinkage) could be observed during the drying process, where the central region of the sample evidenced less changes. Persimmon’s physical properties were experimentally obtained as the temperature function and heat and mass convective coefficients were adjusted as a time function. A numerical simulation using the Finite Volume Method allowed to describe the evolution of temperature and moisture content distributions during drying. The numerical and experimental results of temperature and moisture during persimmon drying were found to be in a good agreement.

Experimental Evaluation and Kinetic Analysis of Direct-Contact Ultrasonic Fabric Drying Process

2020 ◽  
Vol 13 (2) ◽  
Author(s):  
Chang Peng ◽  
Saeed Moghaddam
Keyword(s):  
Direct Contact ◽  
Ultrasonic Transducer ◽  
Gaussian Model ◽  
Weibull Model ◽  
Drying Kinetics ◽  
Energy Prices ◽  
Drying Process ◽  
Liquid Form ◽  
Drying Time ◽  
Kinetics Of

Abstract Over the past two decades, due to the rising energy prices and growing awareness about climate change, significant efforts have been devoted to reducing the energy consumption of various home appliances. However, the energy efficiency of clothes dryers has little improvement. Recent innovations in the direct-contact ultrasonic fabric drying technique offer new opportunities for energy saving. In this technique, high-frequency mechanical vibrations generated by the ultrasonic transducer are utilized to atomize water from a fabric in the liquid form, which demonstrates great potential for reducing energy use and drying time of the fabric drying process. Here, for the first time, fabric drying kinetics under different direct-contact ultrasonic drying conditions were investigated experimentally and analytically. The drying processes of four kinds of fabrics were experimentally tested under different ultrasonic transducer vibration frequency (115, 135, and 155 kHz) and input power (1.2, 2.5, and 4.4 W) conditions. According to the experimental data, five different kinds of models were applied to quantify the drying kinetics of fabrics during direct-contact ultrasonic drying. The models not only incorporated the transducer parameters but also the parameters related to the nature of fabric. Our evaluation results of model prediction performance demonstrated that the two empirical models, i.e., the Weibull model and the Gaussian model, were superior to the three semi-theoretical models for anticipating the drying kinetics of fabrics under direct-contact ultrasonic drying. Furthermore, the Weibull model is more suitable for practical energy-efficient direct-contact ultrasonic fabric drying applications compared with the Gaussian model.

A numerical simulation of a line-type paint drying furnace

2019 ◽  
Vol 30 (5) ◽  
pp. 2639-2653
Author(s):  
Jongrak Choi ◽  
Giyeob Yang ◽  
Nahmkeon Hur
Keyword(s):  
Numerical Results ◽  
Drying Process ◽  
Drying Time ◽  
Content Type ◽  
Hot Air ◽  
Air Supply ◽  
Nozzle Configuration ◽  
Paint Drying ◽  
Line Type

Purpose Paint drying is a very important process in an industry where shorter drying time for productivity and lower energy consumption for production cost are required while maintaining the product’s painting quality. In the present study, a drying process in a line-type paint drying furnace equipped with nozzles for hot air supply and moving conveyer belt to dry painted automotive parts is numerically simulated for the flow and heat transfer inside the furnace to evaluate the quality of the drying or baking at the end of the drying process in a production line. Design/methodology/approach A baking window for a specific paint is used for judging the local degree of baking (DOB) of the painted parts, which can be useful to identify under-baked or over-baked locations of the painted parts, and hence the quality of the baking process. Findings Numerical results of a time history of temperatures at two monitoring points on the painted parts were obtained and compared to the measured data in an actual furnace and showed good agreement. Three types of paints were considered in the present study and numerical results showed different drying characteristics. In addition to the original furnace nozzle configuration, two more furnace nozzle configurations with different numbers, direction and speed of hot air supply were simulated to improve the furnace’s drying performance. As a result, a newly suggested nozzle configuration with quick drying paint can give us a remarkable improvement in surface averaged DOB compared to the original nozzle configuration with original paint. Originality/value The present simulation technique and DOB methodology can be used for the optimal design of a drying furnace.

scholarly journals Influence of Different Hot Air Drying Temperatures on Drying Kinetics, Shrinkage, and Colour of Persimmon Slices

Foods ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 101 ◽  
Author(s):  
Senadeera ◽  
Adiletta ◽  
Önal ◽  
Di Matteo ◽  
Russo
Keyword(s):  
Moisture Content ◽  
Quadratic Model ◽  
Drying Process ◽  
Air Velocity ◽  
Hot Air Drying ◽  
Drying Time ◽  
Air Drying ◽  
Drying Characteristics ◽  
Drying Temperature ◽  
Hot Air

Drying characteristics of persimmon, cv. “Rojo Brillante”, slabs were experimentally determined in a hot air convective drier at drying temperatures of 45, 50, 55, 60, and 65 °C at a fixed air velocity of 2.3 m/s. It was observed that the drying temperature affected the drying time, shrinkage, and colour. Four empirical mathematical models namely, Enderson and Pabis, Page, Logarithmic, and Two term, were evaluated in order to deeply understand the drying process (moisture ratio). The Page model described the best representation of the experimental drying data at all investigated temperatures (45, 50, 55, 60, 65 °C). According to the evaluation of the shrinkage models, the Quadratic model provided the best representation of the volumetric shrinkage of persimmons as a function of moisture content. Overall, higher drying temperature (65 °C) improved the colour retention of dried persimmon slabs.

scholarly journals Quality of Milled Rice from Large-Scale Dried Paddy Rice by Hot Air Combined with Radio Frequency Heating

Processes ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 2277
Author(s):  
Karn Chitsuthipakorn ◽  
Sa-nguansak Thanapornpoonpong
Keyword(s):  
Moisture Content ◽  
Radio Frequency ◽  
Block Design ◽  
Specific Energy Consumption ◽  
Brown Rice ◽  
Convective Drying ◽  
Control Treatment ◽  
Rf Heating ◽  
Drying Time ◽  
Hot Air

A scaled-up process for paddy drying was developed using hot air (HA) combined with radio frequency (RF) heating. The study was conducted using hot air (control treatment) arranged in descending order in four temperature levels, namely 80 °C at moisture content of 25–26%, 70 °C at moisture content of 20–25%, 60 °C at moisture content of 17–20%, and 50 °C at moisture content of 13–17%, as well as with hot air combined with radio frequency (HA/RF) at different paddy temperatures (45–60 °C) by adjusting the appropriate RF energy when passing through RF heating chamber, namely HA/RF45, HA/RF50, HA/RF55, and HA/RF60. Each treatment was performed in three replicates and data were statistically analyzed in a randomized complete block design. The quality attributes of paddies affected by the drying process were assessed: fissure percentage, color, milling quality, and sensory evaluation. The drying efficiency showed that the drying time and the specific energy consumption could be decreased by up to 54.44% and 23.17% at HA/RF60 and HA/RF45, respectively. As the RF heating temperature increased, the fissure percentage of brown rice kernels at HA/RF45 and HA was not significantly impacted. Regarding color evaluation, combining RF heating and convective drying at all given conditions could be statistically applied in terms of the b*, WI, and ΔE* value. Considering the milling yield of HA as the baseline, head rice yield was maximized at HA/RF45, while bran yield reached the maximum at HA/RF60. The liking score of cooked rice after it was dried using the HA method was the highest. This study concludes that the HA/RF45 was the most appropriate drying condition, and this may provide preliminary exposure to the industrial drying of paddies.

Test Research and Parameter Analysis of Grain Drying Model

2011 ◽  
Vol 66-68 ◽  
pp. 573-576
Author(s):  
Chun Shan Liu ◽  
Wen Fu Wu ◽  
Jia Yao ◽  
Ya Qin Li ◽  
Chuang Liu
Keyword(s):  
Moisture Content ◽  
Air Temperature ◽  
Air Flow ◽  
Parameter Analysis ◽  
Mathematics Model ◽  
Drying Process ◽  
Drying Time ◽  
Hot Air ◽  
Grain Moisture ◽  
Grain Drying

The purpose of this study is to explore the effecting principle in the drying process. The factors such as hot air temperature, hot air flow, drying time on the grain moisture content have been all investigated. Using UD to establish the optimization mathematics model which making the grain dryer moisture content as the goal of the design, making the factors of hot air flow, drying time, air temperature as parameters, with the help of UD to analysis the effecting principle of the drying process parameters on the grain moisture content, some references have been provided to the tower dryer.

scholarly journals Pulsed electric field pre-treatment efficiency analysis in processes of biomaterials drying

2019 ◽  
Vol 80 (4) ◽  
pp. 49-54 ◽  
Author(s):  
I. A. Shorstkii ◽  
D. A. Khudyakov
Keyword(s):  
Field Strength ◽  
Electric Field ◽  
Mathematical Models ◽  
Electric Field Strength ◽  
Pulsed Electric Field ◽  
Convective Drying ◽  
Efficient Production ◽  
Drying Process ◽  
Drying Time ◽  
Pre Treatment

The transition to an efficient economy and efficient production requires building the foundations for the development of energy efficient technologies and the drying of biomaterials to convert them into useful products. The purpose of this work is to analyze the effectiveness of pretreatment with a pulsed electric field (PEF) in the process of convective drying of biomaterials. The PEF was processed with electric field strength of 2, 4 and 6 kV/cm, the number of pulses 500, with a pulse duration of 50 ?s. Based on the electrical conductivity data of the biomaterial, the index of the disintegration 56% was determined before and after the PEF treatment, which confirms the existence of an electroporation mechanism of the material structure. The drying process is presented with a description of various mathematical models. PEF pre-treatment with the parameters of electric field strength 4 and 6 kV / cm and the number of impulses 500 allowed to reduce the drying time by 13.8% for the value E = 0.02. Total time spent on the drying process reduced by 20-25 minutes. It should be noted that the total energy spent on PEF pre-treatment (<150 W / kg) compared with the energy spent on the drying process is incommensurably small. Statistical analysis of the considered mathematical models showed good convergence of most models with experimental data. The considered technology of pretreatment of PEF can ensure the effective processing of biomaterials in the required amount to obtain high-quality and safe products. Obtained data of the kinetics process can be used to the mathematical model of the drying process design with the use of preliminary treatment processing.

scholarly journals Effect of Temperature at Tray Position on Drying of D.ark Re.d Oni.on-slice.s at Elevated Air Velocity

2020 ◽  
Vol 9 (4) ◽  
pp. 293-296
Keyword(s):  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Moisture Ratio ◽  
Convective Drying ◽  
Flow Rate Ratio ◽  
Effect Of Temperature ◽  
Drying Process ◽  
Air Velocity ◽  
Drying Time

The convective drying process is used to dry onion-slices. The drying experiments are conducted at a drying temperature of 50oC, 60oC, 70oC, and at an air velocity of 1.99, 3.54, 5.66, and 7.52 m/s. The objective is to study the influence of tray position on drying of dark red onion. The work diverges in analyzing drying constants at air velocity beyond 2 m/s. The moisture ratio for the middle tray is greater compared to the top and bottom tray. A smaller moisture ratio is observed for 60°C compared to 50 and 70°C. Moisture removal per unit mass flow rate ratio is lowest observed for bottom tray with 60°C. The ratio of moisture content and mass flow rate for 60 and 70 °C, displays a downward trend with drying time. The randomness in the drying rate at 60 °C and 70 °C is comparatively lesser than 50 °C.

scholarly journals Applicability of Pulsed Electric Field (PEF) Pre-Treatment for a Convective Two-Step Drying Process

Foods ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 512 ◽  
Author(s):  
Robin Ostermeier ◽  
Oleksii Parniakov ◽  
Stefan Töpfl ◽  
Henry Jäger
Keyword(s):  
Electric Field ◽  
Pyruvic Acid ◽  
Acid Content ◽  
Pulsed Electric Field ◽  
Convective Drying ◽  
Quality Analysis ◽  
Drying Process ◽  
Drying Time ◽  
Treated Sample ◽  
Pre Treatment

Available literature and previous studies focus on the Pulsed Electric Field (PEF) parameters influencing the drying process of fruit and vegetable tissue. This study investigates the applicability of PEF pre-treatment considering the industrial-scale drying conditions of onions and related quality parameters of the final product. First, the influence of the PEF treatment (W = 4.0 kJ/kg, E = 1.07 kV/cm) on the convective drying was investigated for samples dried at constant temperatures (65, 75, and 85 °C) and drying profiles (85/55, 85/65, and 85/75 °C). These trials were performed along with the determination of the breakpoint to assure an industrial drying profile with varying temperatures. A reduction in drying time of 32% was achieved by applying PEF prior to drying at profile 85/65 °C (target moisture ≤7%). The effective water diffusion coefficient for the last drying section has been increased from 1.99 × 10−10 m2/s to 3.48 × 10−10 m2/s in the PEF-treated tissue. In case of the 85/65 °C drying profile, the PEF-treated sample showed the highest benefits in terms of process efficiency and quality compared to the untreated sample. A quality analysis was performed considering the colour, amount of blisters, pyruvic acid content, and the rehydration behavior comparing the untreated and PEF-treated sample. The PEF-treated sample showed practically no blisters and a 14.5% higher pyruvic acid content. Moreover, the rehydration coefficient was 47% higher when applying PEF prior to drying.

Sign in / Sign up

Export Citation Format

Share Document