scholarly journals MULTI-CRITERIA ANALYSIS OF ALTERNATIVE ENERGY SUPPLY SOLUTIONS TO PUBLIC NEARLY ZERO ENERGY BUILDINGS / BEVEIK NULINIO ENERGIJOS BALANSO VISUOMENINIŲ PASTATŲ APRŪPINIMO ENERGIJA SPRENDIMAI, DAUGIAKRITERĖ ANALIZĖ

2013 ◽  
Vol 5 (4) ◽  
pp. 435-441 ◽  
Author(s):  
Giedrius Šiupšinskas ◽  
Solveiga Adomėnaitė

The article analyzes energy supply alternatives for modernised public nearly zero energy buildings. The paper examines alternative energy production systems such as heat pumps (air-water and ground-water), solar collectors, adsorption cooling, biomass boiler, solar photovoltaic, wind turbines and combinations of these systems. The simulation of the analysed building energy demand for different energy production alternatives has been performed using TRNSYS modelling software. In order to determine an optimal energy supply variant, the estimated results of energy, environmental, and economic evaluation have been converted into non-dimensional variables (3E) using multi-criteria analysis. Article in Lithuanian. Santrauka Siekiant beveik nulinio energijos balanso modernizuotame viešosios paskirties pastate, nagrinėjamos aprūpinimo energija alternatyvos. Tiriamos šios alternatyvios aprūpinimo energija sistemos: šilumos siurbliai (gruntas–vanduo ir oras– vanduo), saulės kolektoriai, adsorbcinė vėsinimo mašina, biokuro katilas, saulės elementai, vėjo jėgainė – ir šių sistemų deriniai. Skirtingų aprūpinimo energija variantų energijos poreikiai modeliuojami TRNSYS (The Transient System Simulation Program) modeliavimo programa. Siekiant nustatyti optimalų aprūpinimo energija variantą, gauti energinio, ekologinio ir ekonominio vertinimų rezultatai daugiakriterės analizės būdu perskaičiuojami į nedimensinius rodiklius (3E).

Energies ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 6026
Author(s):  
Sergio Gómez Melgar ◽  
Antonio Sánchez Cordero ◽  
Marta Videras Rodríguez ◽  
José Manuel Andújar Márquez

The construction sector is a great contributor to global warming both in new and existing buildings. Minimum energy buildings (MEBs) demand as little energy as possible, with an optimized architectural design, which includes passive solutions. In addition, these buildings consume as low energy as possible introducing efficient facilities. Finally, they produce renewable energy on-site to become zero energy buildings (ZEBs) or even plus zero energy buildings (+ZEB). In this paper, a deep analysis of the energy use and renewable energy production of a social dwelling was carried out based on data measurements. Unfortunately, in residential buildings, most renewable energy production occurs at a different time than energy demand. Furthermore, energy storage batteries for these facilities are expensive and require significant maintenance. The present research proposes a strategy, which involves rescheduling energy demand by changing the habits of the occupants in terms of domestic hot water (DHW) consumption, cooking, and washing. Rescheduling these three electric circuits increases the usability of the renewable energy produced on-site, reducing the misused energy from 52.84% to 25.14%, as well as decreasing electricity costs by 58.46%.


2013 ◽  
Vol 5 (4) ◽  
pp. 423-428 ◽  
Author(s):  
Artur Rogoža

The article analyses energy supply alternatives for a partially renovated residential building. In addition to the existing district heating (base case) alternative systems, gas boilers, heat pumps (air-water and ground-water), solar collectors, solar cells, and combinations of these systems have been examined. Actual heat consumption of the building and electricity demand determined by the statistical method are used for simulating the systems. The process of simulation is performed using EnergyPro software. In order to select an optimal energy supply option, the life cycle analysis of all systems has been carried out throughout a life span of the building, and the estimated results of energy, environmental and economic evaluation have been converted into non-dimensional variables (3E) using multi–criteria analysis. Article in Lithuanian. Santrauka Nagrinėjamos iš dalies renovuoto daugiabučio gyvenamojo pastato aprūpinimo energija alternatyvos. Be esamo centralizuotojo šilumos tiekimo (bazinis variantas), tiriama alternatyviosios sistemos: dujiniai katilai, šilumos siurbliai (oras– vanduo ir gruntas–vanduo), saulės kolektoriai, saulės elementai ir šių sistemų deriniai. Modeliuojant sistemas, naudojami faktiniai pastato šilumos suvartojimo ir statistiniu būdu nustatyti elektros poreikių duomenys. Sistemų modeliavimas atliekamas EnergyPro programa. Siekiant nustatyti optimalų aprūpinimo energija variantą, analizuojamas visų sistemų gyvavimo ciklas per visą pastato gyvavimo trukmę, o gauti energinio, ekologinio ir ekonominio vertinimų rezultatai daugiakriterės analizės būdu perskaičiuojami į nedimensinius rodiklius (3E).


2018 ◽  
Vol 10 (0) ◽  
pp. 1-6
Author(s):  
Rūta Mikučionienė ◽  
Vygantas Žėkas

The article analyzes energy supply alternatives for administrative nearly zero energy building in Kaunas. Alternative energy production systems such as biofuel boiler, condensing boiler, heat pumps (air-water and groundwater), solar photovoltaic, solar collectors and combinations of these systems are analysed. The simulation of analysed building energy demands has been made using DesignBuilder modelling software and modelling of energy production alternatives has been performed using energyPRO software. In order to determine the optimal energy production alternative, the combinations of technologies are compared by energetic and ecological indicators and influence of each combination on the energy performance class is assessed. Santrauka Vis griežtėjantys Europos Sąjungos reikalavimai pastatų sektoriuje reikalauja efektyvesnių ir ekologiškesnių sprendimų aprūpinant pastatus energija, todėl būtina ieškoti geriausių aprūpinimo energija variantų juos įvertinant keliais kriterijais. Tiriamos administracinio beveik nulinės energijos pastato šios aprūpinimo energija technologijos: biokuro katilas, kondensacinis dujų katilas, šilumos siurbliai (gruntas–vanduo ir oras–vanduo), šalčio mašina, centralizuoti šilumos tinklai, saulės elementai ir saulės kolektoriai. Pastato poreikiai modeliuojami DesignBuilder, o aprūpinimo energija technologijų deriniai modeliuojami energyPRO modeliavimo programa. Siekiant nustatyti optimalų aprūpinimo energija variantą, technologijų deriniai yra lyginami pagal energinį ir ekologinį rodiklius ir įvertinama kiekvieno derinio įtaka pastato energinio naudingumo klasei.


Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3252 ◽  
Author(s):  
Xiaolong Xu ◽  
Guohui Feng ◽  
Dandan Chi ◽  
Ming Liu ◽  
Baoyue Dou

Optimizing key parameters with energy consumption as the control target can minimize the heating and cooling needs of buildings. In this paper we focus on the optimization of performance parameters design and the prediction of energy consumption for nearly Zero Energy Buildings (nZEB). The optimal combination of various performance parameters and the Energy Saving Ratio (ESR)are studied by using a large volume of simulation data. Artificial neural networks (ANNs) are applied for the prediction of annual electrical energy consumption in a nearly Zero Energy Building designs located in Shenyang (China). The data of the energy demand for our test is obtained by using building simulation techniques. The results demonstrate that the heating energy demand for our test nearly Zero Energy Building is 17.42 KW·h/(m2·a). The Energy Saving Ratio of window-to-wall ratios optimization is the most obvious, followed by thermal performance parameters of the window, and finally the insulation thickness. The maximum relative error of building energy consumption prediction is 6.46% when using the artificial neural network model to predict energy consumption. The establishment of this prediction method enables architects to easily and accurately obtain the energy consumption of buildings during the design phase.


Author(s):  
Elisa Peñalvo-López ◽  
Javier Cárcel-Carrasco ◽  
Manuel Valcuende-Paya ◽  
María Carmen Carnero-Moya

The construction segment is an important economic sector in Europe, representing 9% of European gross domestic product (GDP) and providing approximately 18 million direct jobs. Construction activities that include renovation work and energy retrofits add almost twice as much value as the construction of new buildings, and small and medium-sized enterprises (SMEs) contribute more than 70% of the value added in the EU building sector. Furthermore, European legislation obliges member states to establish minimum energy efficiency requirements for buildings to achieve optimum levels of costs versus energy demand reduction. These requirements are reviewed every five years and represent categories of buildings based on their energy levels (demand and generation). This chapter analyzes the legislation associated to nearly zero energy buildings (nZEB) in Spain in order to identify the factors that will leverage their massive implementation.


Author(s):  
Elisa Peñalvo-López ◽  
Javier Cárcel-Carrasco ◽  
Manuel Valcuende-Paya ◽  
María Carmen Carnero-Moya

The construction segment is an important economic sector in Europe, representing 9% of European gross domestic product (GDP) and providing approximately 18 million direct jobs. Construction activities that include renovation work and energy retrofits add almost twice as much value as the construction of new buildings, and small and medium-sized enterprises (SMEs) contribute more than 70% of the value added in the EU building sector. Furthermore, European legislation obliges member states to establish minimum energy efficiency requirements for buildings to achieve optimum levels of costs versus energy demand reduction. These requirements are reviewed every five years and represent categories of buildings based on their energy levels (demand and generation). This chapter analyzes the legislation associated to nearly zero energy buildings (nZEB) in Spain in order to identify the factors that will leverage their massive implementation.


2018 ◽  
Vol 70 ◽  
pp. 01001
Author(s):  
Jacek Biskupski

This paper gives a thorough description of the two different scenarios of retrofit of an existing detached country house (with high primary energy demand) to a net zero energy building (nZEB) or near zero energy (nearZEB) by using energy form on-site RES. Using a designed piece of modelling software author pointed out two possible solutions. First one, based on a bio boiler and small on-site PV generator (on-grid) and the other based on large PV generator and three heat pumps. A 24 months test was performed in order to find out the output of both scenarios. In first period, the bio boiler delivered energy for space heating and DHW, while energy from PV was used to cover all electricity needs of the household during the 12 months testing period. In the later, the energy received from 10 kWp PV of was partly used to cover the current needs of the entire household (switchable on/off-grid system), and surplus was stored in the national electricity grid and regained later in the winter for the space heating (by a GSHP) and ventilation (ASHP) and DHW (dedicated ASHP). In both cases the system proofed the possibility to achieve the nZEB (nearZEB in first scenario) state of the household, as all (in the first near all) energy needs were covered by renewable energy produced on-site.


2013 ◽  
Vol 24 ◽  
pp. S45
Author(s):  
Diego Carmona Fernández ◽  
Awf Al Kassir Abdulla ◽  
Miguel Ángel Jaramillo Morán ◽  
Luis Alberto Horrillo

Sign in / Sign up

Export Citation Format

Share Document