scholarly journals STATIC ANALYSIS AND SIMPLIFIED DESIGN OF SUSPENSION BRIDGES HAVING VARIOUS RIGIDITY OF CABLES

2010 ◽  
Vol 16 (3) ◽  
pp. 363-371 ◽  
Author(s):  
Tatjana Grigorjeva ◽  
Algirdas Juozapaitis ◽  
Zenonas Kamaitis
Keyword(s):  
Static Loading ◽  
Suspension Bridge ◽  
Suspension Bridges ◽  
Design Procedures ◽  
Suspension Systems ◽  
Main Cable ◽  
Composite Section ◽  
Internal Forces ◽  
Standard Section ◽  
Main Cables

Increased deformability can be considered as the basic disadvantage of suspension bridges. One of the ways to increase the rigidity of a suspension bridge is to transfer a part of stiffening girder rigidity to a suspension main cable. To give the suspension bridge more stable appearance, the authors propose to use the cables of varying bending stiffness. The main cables can be made of standard section shapes or have a composite section. The object of this work was to study a method for analyzing and determining the internal forces in the main cables and stiffening girder under static loading to provide recommendations for designing suspension bridges with stiffened cables. Simple formulas are presented for determining displacements, internal forces and stresses in the main cable and stiffening girder. Finite element modeling was performed. The final part of the paper discusses design procedures for such suspension systems. An example of a pedestrian suspension bridge is appended. Santrauka Esminis kabamuju tiltu trūkumas ‐ didelis ju deformatyvumas. Deformatyvumui sumažinti autoriai siūlo dali standumo sijos lenkiamojo standžio perduoti kabamajam lynui. Baigtinio lenkiamojo standumo lynai gali būti daromi iš standartiniu valcuotuju profiliuočiu arba sudetinio skerspjūvio. Šio darbo tikslas ‐ pateikti supaprastinta metodika kabamojo tilto standaus lyno ir standumo sijos elgsenos analizei atlikti bei rekomendacijas tokiems statiškai apkrautiems tiltams projektuoti. Pateiktos paprastos formules lyno ir sijos poslinkiams, iražoms ir itempiams apskaičiuoti. Atliktas kabamosios tilto siste‐mos modeliavimas baigtiniais elementais. Aptartos tokiu kabamuju tiltu projektavimo procedūros. Pateiktas pesčiuju via‐duko kabamuju konstrukciju projektavimo pavyzdys.

scholarly journals Parametric Study on Responses of a Self-Anchored Suspension Bridge to Sudden Breakage of a Hanger

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Wenliang Qiu ◽  
Meng Jiang ◽  
Cailiang Huang
Keyword(s):  
Suspension Bridge ◽  
Element Model ◽  
Dynamic Responses ◽  
Flexural Stiffness ◽  
Static And Dynamic Analysis ◽  
Main Cable ◽  
Reaction Forces ◽  
Internal Forces ◽  
Torsion Stiffness ◽  
Main Cables

The girder of self-anchored suspension bridge is subjected to large compression force applied by main cables. So, serious damage of the girder due to breakage of hangers may cause the collapse of the whole bridge. With the time increasing, the hangers may break suddenly for their resistance capacities decrease due to corrosion. Using nonlinear static and dynamic analysis methods and adopting 3D finite element model, the responses of an actual self-anchored suspension bridge to sudden breakage of hangers are studied in this paper. The results show that the sudden breakage of a hanger causes violent vibration and large changes in internal forces of the bridge. In the process of the vibration, the maximum tension of hanger produced by breakage of a hanger exceeds 2.22 times its initial value, and the reaction forces of the bearings increase by more than 1.86 times the tension of the broken hanger. Based on the actual bridge, the influences of some factors including flexural stiffness of girder, torsion stiffness of girder, flexural stiffness of main cable, weight of girder, weight of main cable, span to sag ratio of main cable, distance of hangers, span length, and breakage time of hanger on the dynamic responses are studied in detail, and the influencing extent of the factors is presented.

Fire protection of suspension bridge main cables

2018 ◽  
Author(s):  
Eva Kragh ◽  
Harikrishna Narasimhan
Keyword(s):  
Fire Protection ◽  
Suspension Bridge ◽  
Strength Reduction ◽  
Mitigation Measures ◽  
Suspension Bridges ◽  
Main Cable ◽  
Passive Fire Protection ◽  
Heat Penetration ◽  
Existing Bridges ◽  
Main Cables

<p>Large suspension bridges are increasingly exposed to fire risks as the traffic carried by them increases. A truck fire on a suspension bridge may be a relatively likely accident that may lead to main cable failure or a strength reduction that will either cause down classification of the load carrying capacity or need for long lasting repairs of the main cable, all at high costs for society.<p>To consider fire protection of suspension bridge cables is not yet standard practice but there is a need for systematically assessing the fire risks for the cables and implementing mitigation measures as needed for both new and existing bridges.<p>In 2017, the New Little Belt Bridge in Denmark was retrofitted with passive fire protection for the main cables and in 2018, a similar retrofit of the Great Belt East Bridge in Denmark starts. The dimensions, design and configuration of the main cables are different for the two bridges. Special efforts were to model heat penetration into the main cable following a fire, and the resulting strength reduction.<p>This paper describes the systematic process to evaluate and provide fire protection for the main cables of these bridges.

Analysis and Test on Mechanical Properties of a Flexible Suspension Bridge

2013 ◽  
Vol 405-408 ◽  
pp. 1616-1622
Author(s):  
Guo Hui Cao ◽  
Jia Xing Hu ◽  
Kai Zhang ◽  
Min He
Keyword(s):  
Mechanical Properties ◽  
Suspension Bridge ◽  
Experimental Results ◽  
Suspension Bridges ◽  
Loading Test ◽  
Main Cable ◽  
Element Simulation ◽  
Static Loading Test ◽  
Geometric Nonlinear Analysis ◽  
Test Process

In order to research on mechanical properties of flexible suspension bridges, a geometric nonlinear analysis method was used to simulate on the experimental results, and carried on static loading test finally. In the loading test process, the deformations were measured in critical section of the suspension bridge, and displacement values of measured are compared with simulation values of the finite element simulation. Meanwhile the deformations of the main cable sag are observed under classification loading, the results show that the main cable sag increment is basically linear relationship with the increment of mid-span loading and tension from 3L/8 and 5L/8 to L/2 section, the main cable that increasing unit sag required mid-span loads and tension are gradually reduce in near L/4 and 3L/4 sections and gradually increase in near L/8 and 7L/8 sections and almost equal in near L/2, 3L/8 and 5L/8 sections. From the experimental results, the flexible suspension bridge possess good mechanical properties.

scholarly journals Probabilistic Assessment of the Safety of Main Cables for Long-Span Suspension Bridges considering Corrosion Effects

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Hao Tian ◽  
Jiji Wang ◽  
Sugong Cao ◽  
Yuanli Chen ◽  
Luwei Li
Keyword(s):  
Probability Model ◽  
Steel Wire ◽  
Suspension Bridge ◽  
Element Model ◽  
Traffic Load ◽  
Suspension Bridges ◽  
Accelerated Corrosion ◽  
Long Span ◽  
Accelerated Corrosion Tests ◽  
Main Cables

This paper presents a reliability analysis to assess the safety of corroded main cables of a long-span suspension bridge. A multiscale probability model was established for the resistance of the main cables considering the length effect and the Daniels effect. Corrosion effects were considered in the wire scale by relating the test results from accelerated corrosion tests to the corrosion stages and in the cable scale by adopting a corrosion stage distribution of the main cable section in NCHRP Report 534. The load effects of temperature, wind load, and traffic load were obtained by solving a finite element model with inputs from in-service monitoring data. The so-obtained reliability index of the main cables reduces significantly after operation for over 50 years and falls below the design target value due to corrosion effects on the mechanical properties of the steel wire. Multiple measures should be taken to delay the corrosion effects and ensure the safety of the main cables in the design service life.

Experimental Study on Mass Transfer Coefficient of Dry Air in Main Cable of Suspension Bridge

2012 ◽  
Vol 461 ◽  
pp. 151-154
Author(s):  
Dai Yong Jia ◽  
Lu Yan Sui ◽  
Ming Lai He
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Experimental Studies ◽  
Suspension Bridge ◽  
Suspension Bridges ◽  
Dry Air ◽  
Experiment Platform ◽  
Main Cable ◽  
Key Parameter

In this study, an experiment platform was built up to determine the key parameter, mass transfer coefficient, of the ventilation and dehumidification process in main cable of suspension bridge. On the basis of experimental studies, an empirical formula of the mass transfer coefficient was obtained, which can greatly contribute to control the content of moisture in the main cable of suspension bridges.

scholarly journals Circumferential Expansion Property of Composite Wrapping System for Main Cable Protection of Suspension Bridge

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Pengfei Cao ◽  
Hai Fang ◽  
Weiqing Liu ◽  
Yong Zhuang ◽  
Yuan Fang ◽  
...  
Keyword(s):  
Growth Rate ◽  
Bearing Capacity ◽  
Radial Displacement ◽  
Failure Modes ◽  
Suspension Bridge ◽  
Temperature Deformation ◽  
Suspension Bridges ◽  
Cross Sectional ◽  
Main Cable ◽  
Rubber Belt

A composite wrapping system for main cable protection of suspension bridges was designed by using prepreg fiber-reinforced composites and nitrile rubber. The circumferential expansion performance of the system was tested, and the curves of circumferential bearing capacity and radial displacement of the components were obtained. Failure modes of each group of components were compared and analyzed. The results show that most of the components are vertically fractured at the lap transition. The increase of the number of prepreg layers contributed the most to the circumferential bearing capacity of components, with a growth rate of 65.31%~109.01%. The increase of rubber belt layers had the most significant effect on the radial displacement of the components, with a growth rate of 7.06%~23.5%. In the initial stage of the test, the strain of each part of the component was smaller due to the compaction by the loading device, and the strain value of the component was generally linearly increased during the loading process, during which the strain of the overlap was the smallest. The calculated cross-sectional temperature deformation of the main cable is in good agreement with the experimental data. The application of the rubber belt increases the deformation of the main cable; therefore, the protection system for the main cable could have more deformation redundancy and delay the arrival of the ultimate strain of the outer prepreg wrap.

scholarly journals Simplified Analytical Method for Optimized Initial Shape Analysis of Self-Anchored Suspension Bridges and Its Verification

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Myung-Rag Jung ◽  
Dong-Ju Min ◽  
Moon-Young Kim
Keyword(s):  
Analytical Method ◽  
Bending Moment ◽  
Suspension Bridge ◽  
Suspension Bridges ◽  
Equilibrium Equations ◽  
Initial State ◽  
Initial Shape ◽  
Main Cable ◽  
Initial Shape Analysis ◽  
Bridge Models

A simplified analytical method providing accurate unstrained lengths of all structural elements is proposed to find the optimized initial state of self-anchored suspension bridges under dead loads. For this, equilibrium equations of the main girder and the main cable system are derived and solved by evaluating the self-weights of cable members using unstrained cable lengths and iteratively updating both the horizontal tension component and the vertical profile of the main cable. Furthermore, to demonstrate the validity of the simplified analytical method, the unstrained element length method (ULM) is applied to suspension bridge models based on the unstressed lengths of both cable and frame members calculated from the analytical method. Through numerical examples, it is demonstrated that the proposed analytical method can indeed provide an optimized initial solution by showing that both the simplified method and the nonlinear FE procedure lead to practically identical initial configurations with only localized small bending moment distributions.

Object-Oriented Computer-Aided Analysis for Construction Control of Anchored Suspension Bridge

2014 ◽  
Vol 543-547 ◽  
pp. 3977-3981
Author(s):  
Jian Yuan Sun ◽  
Cheng Zhang Yin ◽  
Zeng Bao Ma
Keyword(s):  
Safety Margin ◽  
Object Oriented ◽  
Suspension Bridge ◽  
High Accuracy ◽  
Object Oriented Programming ◽  
Suspension Bridges ◽  
Construction Control ◽  
Control Analysis ◽  
Finite Element Software ◽  
Main Cable

With the increase of the span of suspension bridge, the weight of the main cable increases, and the safety margin becomes smaller. Thus high accuracy is necessary for the construction control analysis of suspension bridges. The traditional finite element software cannot meet the accuracy requirement because of temperature, cable saddle and other factors, which influence the construction control. Based on the modified segmental catenary method, this paper has come up with a fine analysis method for the construction control of suspension bridges. And a software program called ZambisSC has been developed using object-oriented programming language combined with a number of the latest software development technologies. Compared with the monitoring results of Nancha suspension bridge in Guangzhou, China, it shows that ZambisSC can predict the main cable shape with high accuracy.

scholarly journals Wind-Induced Vibration Response of an Inspection Vehicle for Main Cables Based on Computer Simulation

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Lu Zhang ◽  
Shaohua Wang ◽  
Peng Guo ◽  
Qunsheng Wang
Keyword(s):  
Finite Element ◽  
Wind Speed ◽  
Ride Comfort ◽  
Suspension Bridge ◽  
Vibration Response ◽  
Fe Model ◽  
Main Cable ◽  
Main Cables ◽  
Wind Induced Vibration ◽  
Wind Induced Vibration Response

This paper presents a simulation approach based on the finite element method (FEM) to analyze the wind-induced vibration response of an inspection vehicle for main cables. First, two finite element (FE) models of a suspension bridge and a main cable-inspection vehicle coupled system are established using MIDAS Civil software and ANSYS software, respectively. Second, the mean wind speed distribution characteristics at a bridge site are analyzed, and the wind field is simulated based on the spectral representation method (SRM). Third, a modal analysis and a wind-induced vibration response transient analysis of the suspension bridge FE model are completed. Fourth, the vibration characteristics of the inspection vehicle are analyzed by applying fluctuating wind conditions and main cable vibration displacements in the main cable-inspection vehicle coupled FE model. Finally, based on the ISO2631-1-1997 standard, a vehicle ride comfort evaluation is performed. The results of the suspension bridge FE modal analysis are in good accordance with those of the experimental modal test. The effects of the working height, number of nonworking compressing wheels, and number of nonworking driving wheels during driving are discussed. When the average wind speed is less than 13.3 m/s, the maximum total weighted root mean square acceleration (av) is 0.1646 m/s2 and the vehicle ride comfort level is classified as “not uncomfortable.” This approach provides a foundation for the design and application of inspection vehicles.

Analytical methods for the assessment of hanger forces of a suspension bridge based on measured main cable configuration

2019 ◽  
Vol 23 (7) ◽  
pp. 1423-1437
Author(s):  
Wen-ming Zhang ◽  
Gen-min Tian ◽  
Hai-xia Zhao ◽  
Zhi-wei Wang ◽  
Zhao Liu
Keyword(s):  
Vibration Frequency ◽  
Suspension Bridge ◽  
Critical Parameters ◽  
Geometric Condition ◽  
Suspension Bridges ◽  
Horizontal Force ◽  
Frequency Method ◽  
Mechanical Condition ◽  
Reduced Gradient Method ◽  
Main Cable

The accurate measurement of the hanger tensile forces of suspension bridges is crucial for construction control and bridge maintenance. However, the commonly used vibration frequency method is not applicable to the short-hanger force assessment. The configuration of the main cable of a suspension bridge is closely related to hanger forces so that the main cable configuration can reflect the hanger forces. Based on the multi-segment catenary theory, this study proposed an analytical algorithm for the reverse assessment of hanger forces based on the measured configuration data of the main cable. First, the relationship between the hanger force and two critical parameters, that is, the horizontal force of the main cable and the catenary parameter, is established, in which the influence of the saddle arc on the main cable configuration is considered. Then, the horizontal force of the main cable is used as the breakthrough point, and a geometric condition (measuring the coordinates of a non-hanging point on the main cable) or a mechanical condition (measuring the tension of a long hanger by the vibration frequency method) is added. Using the nonlinear generalized reduced gradient method, the nonlinear equations are solved, and all hanger forces are identified. The proposed method feasibility and effectiveness are proved using a suspension bridge with a main span of 730 m as an example. The results show that the algorithm of adding a mechanical condition is lower in sensitivity, less affected by the accuracy of the additional condition, higher in precision, and easier to control, comparing to that of adding a geometric condition. Meanwhile, the horizontal force of the main cable and each hanger force exhibit a nearly perfect linear correlation.

Sign in / Sign up

Export Citation Format

Share Document