scholarly journals Determining the correlation between daytime and night-time road markings visibility

2016 ◽  
Vol 11 (4) ◽  
pp. 283-290 ◽  
Author(s):  
Dario Babić ◽  
Anđelko Ščukanec ◽  
Darko Babić
Keyword(s):  
Dynamic Test ◽  
Measuring Method ◽  
Objective Evaluation ◽  
Test Method ◽  
Night Time ◽  
Road Section ◽  
Minimum Requirements ◽  
Dynamic Measuring ◽  
The Republic ◽  
The Relationship

Road markings quality control implies conducting several different tests, of which the most significant are visibility tests comprising daytime and night-time visibility measurements by applying the static or the dynamic measuring method. Although the dynamic test method allows measuring the visibility along the entire road section and thus provides a more complete and objective evaluation of road markings quality compared to the static method, it does not measure daytime visibility, for which both the European and the national directives define the minimum requirements. The purpose of this paper is to examine the correlation between daytime and night-time visibility based on static measurements conducted on state roads in the Republic of Croatia. The correlation analysis determined that the strength of relationship between daytime and night-time visibility, is relatively weak. Despite being relatively weak, the relationship still exists, which was the reason for conducting a further analysis. In the analysis, a unique coefficient was obtained through the ratio of retroreflection value and daytime visibility value for all the measurements. The unique coefficient was basis for development of a model that will be able to calculate the daytime visibility based on the results of the dynamic measurements of road markings night-time visibility. The authors evaluated the model with a t-test and concluded that the accuracy of the model is statistically satisfactory.

Study on Flow Measurement of Large-Scale Low-Lift Pumping Stations with CFD Method

2012 ◽  
Vol 212-213 ◽  
pp. 1233-1236
Author(s):  
Bin Cheng ◽  
Yong Hai Yu
Keyword(s):  
Numerical Simulation ◽  
Flow Measurement ◽  
Large Scale ◽  
Measuring Method ◽  
Differential Pressure ◽  
Test Method ◽  
Pumping Stations ◽  
Simplec Algorithm ◽  
Cfd Method ◽  
The Relationship

The measuring method of flow of large-scale low-lift pump, in which the differential pressure of two measuring points in inlet passage instead of the mean differential pressure of two specified section of inlet passage to calibrate the relationship between flow and differential pressure, is developed. The numerical simulation on differential pressure of two measuring points in inlet passage, which is took out earlier than the pump set test method, is carried out with the standard k- turbulence model and SIMPLEC algorithm. The comparison of the relationships fitted respectively with numerical simulation approach and pump set test shows that the calibration accuracy of two different ways is nearly same. The conclusion can be drawn that the calibration of the relationship between flow and differential pressure with CFD is feasible. The CFD-based flow measurement method, as a more simple and convenient way, can be applied in large-scale low-lift pumps.

The Dynamic Measuring Method of Nondestructive Testing the Overall Performance of Some Frame Shear Wall Structure

2014 ◽  
Vol 1021 ◽  
pp. 115-118
Author(s):  
Yun Qing Zhao ◽  
Yong Sheng Zhang ◽  
Wei Tao Jiang
Keyword(s):  
Nondestructive Testing ◽  
Dynamic Test ◽  
High Sensitivity ◽  
Measuring Method ◽  
Shear Wall ◽  
Accurate Method ◽  
Test Method ◽  
Wall Structure ◽  
Reinforced Concrete Frame ◽  
Overall Performance

Dynamic test method is a more accurate method of indirect nondestructive testing. The dynamic characteristics of the buildings is obtained by dynamic response of high sensitivity under external excitation vibration pickup structure. The test of a reinforced concrete frame shear wall structure of a complex building was carried on as an example, and the evaluation of the overall performance of the structure was made through the test results.

An evaluation of ECT sample height for small flute board grades and Box Manufacturer’s Certification compliance

TAPPI Journal ◽  
2009 ◽  
Vol 8 (6) ◽  
pp. 24-28
Author(s):  
CORY JAY WILSON ◽  
BENJAMIN FRANK
Keyword(s):  
Compressive Strength ◽  
Compressive Load ◽  
Test Sample ◽  
Test Methods ◽  
Test Method ◽  
Initial Development ◽  
Sample Height ◽  
Relationship Of ◽  
The Relationship ◽  
Corrugated Fiberboard

TAPPI test T811 is the specified method to ascertain ECT relative to box manufacturer’s certification compliance of corrugated fiberboard under Rule 41/ Alternate Item 222. T811 test sample heights were derived from typical board constructions at the time of the test method’s initial development. New, smaller flute sizes have since been developed, and the use of lighter weight boards has become more common. The T811 test method includes sample specifications for typical A-flute, B-flute, and C-flute singlewall (and doublewall and triplewall) structures, but not for newer thinner E-flute or F-flute structures. This research explores the relationship of ECT sample height to measured compressive load, in an effort to determine valid E-flute and F-flute ECT sample heights for use with the T811 method. Through this process, it identifies challenges present in our use of current ECT test methods as a measure of intrinsic compressive strength for smaller flute structures. The data does not support the use of TAPPI T 811 for ECT measurement for E and F flute structures, and demonstrates inconsistencies with current height specifi-cations for some lightweight B flute.

Self-Determination and Territorial Integrity: Southern Cameroons and the Republic of Cameroun

2019 ◽  
Vol 27 (4) ◽  
pp. 629-653
Author(s):  
Valerie Muguoh Chiatoh
Keyword(s):  
International Law ◽  
Armed Conflict ◽  
Third World ◽  
Self Determination ◽  
Territorial Integrity ◽  
Present Issue ◽  
The Republic ◽  
The Relationship

African states and institutions believe that the principle of territorial integrity is applicable to sub-state groups and limits their right to self-determination, contrary to international law. The Anglophone Problem in Cameroon has been an ever-present issue of social, political and economic debates in the country, albeit most times in undertones. This changed as the problem metamorphosed into an otherwise preventable devastating armed conflict with external self-determination having become very popular among the Anglophone People. This situation brings to light the drawbacks of irregular decolonisation, third world colonialism and especially the relationship between self-determination and territorial integrity in Africa.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

Affective labour and class distinction in the night-time economy

2021 ◽  
pp. 003802612110063
Author(s):  
Steven Threadgold ◽  
David Farrugia ◽  
Julia Coffey
Keyword(s):  
Symbolic Dynamics ◽  
Urban Areas ◽  
Service Work ◽  
Night Time ◽  
Feminist Analysis ◽  
Consumption Experience ◽  
Gendered Politics ◽  
The Aesthetic ◽  
The Relationship ◽  
Class Distinction

This article contributes to recent debates about the relationship between affective labour and class by exploring the classed distinctions enacted through affective labour in the urban night-time economy. Bringing theories of affective labour into a dialogue with Bourdieusian feminist analysis, the article explores the affective and symbolic dynamics of hospitality labour in a gentrified inner-urban neighbourhood of Melbourne, Australia. It shows how the practice of hospitality labour enacts classed distinctions and tensions emerging from the gentrification of inner-urban areas, and how the aesthetic and symbolic dimensions of class contribute to the valorisation of affect in hospitality venues. The valorisation of affect are processes in which the value attributed to an atmosphere or consumption experience is based on the forms of distinction practised within the venue, enacted in aesthetics, tastes and modes of embodiment. The article also shows how practices of class distinction – both ‘punching up’ and ‘managing down’ – are connected to the gendered politics of service work in the way that workers manage the threat of violence or sexual harassment in venues. In general, the article shows how the classed dynamics of gentrification are enacted in affective economies, and therefore how Bourdieusian analysis of class can be usefully deployed in theoretical debates about affective labour.

scholarly journals The Relationship between Tree-Ring Growths of Pinus densiflora and Climate from Three Mountains in Central Region, the Republic of Korea

Atmosphere ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 878
Author(s):  
Chang-Hyun Park ◽  
Ui-Cheon Lee ◽  
Soo-Chul Kim ◽  
Kwang-Hee Lee
Keyword(s):  
Tree Ring ◽  
National Parks ◽  
Central Region ◽  
Climatic Factors ◽  
Pinus Densiflora ◽  
Ring Width ◽  
Republic Of Korea ◽  
Logarithmic Curve ◽  
The Republic ◽  
The Relationship

To analyze the relationship between climatic factors (monthly mean temperature and total precipitation) and tree-ring growths of Pinus densiflora from the central region of the Republic of Korea, more than 20 trees were sampled from three national parks. The tree-ring chronology of Mt. Bukhan covering the period of 1917–2016 was assessed, as well as that of Mt. Seorak across 1687–2017 and Mt. Worak across 1777–2017. After cross-dating, each ring-width series was double-standardized by first fitting a logarithmic curve and then a 50 year cubic spline. Climate-growth relationships were computed with bootstrap correlation functions. The result of the analysis showed a positive response from the current March temperature and May precipitations for tree-ring growth of Pinus densiflora. It indicates that a higher temperature supply during early spring season and precipitation during cambium activity are important for radial growths of Pinus densiflora from the central region in the Republic of Korea.

scholarly journals Concept and Realization of a Novel Test Method Using a Dynamic Test Stand for Detecting Persons by Sensor Systems on Autonomous Agricultural Robotics

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2315
Author(s):  
Christian Meltebrink ◽  
Tom Ströer ◽  
Benjamin Wegmann ◽  
Cornelia Weltzien ◽  
Arno Ruckelshausen
Keyword(s):  
Environmental Conditions ◽  
Dynamic Test ◽  
Test Methods ◽  
Test Stand ◽  
Human Detection ◽  
Test Method ◽  
Sensor Systems ◽  
Functional Safety ◽  
Agricultural Robots ◽  
Agricultural Robotics

As an essential part for the development of autonomous agricultural robotics, the functional safety of autonomous agricultural machines is largely based on the functionality and robustness of non-contact sensor systems for human protection. This article presents a new step in the development of autonomous agricultural machine with a concept and the realization of a novel test method using a dynamic test stand on an agricultural farm in outdoor areas. With this test method, commercially available sensor systems are tested in a long-term test around the clock for 365 days a year and 24 h a day on a dynamic test stand in continuous outdoor use. A test over a longer period of time is needed to test as much as possible all occurring environmental conditions. This test is determined by the naturally occurring environmental conditions. This fact corresponds to the reality of unpredictable/determinable environmental conditions in the field and makes the test method and test stand so unique. The focus of the developed test methods is on creating own real environment detection areas (REDAs) for each sensor system, which can be used to compare and evaluate the autonomous human detection of the sensor systems for the functional safety of autonomous agricultural robots with a humanoid test target. Sensor manufacturers from industry and the automotive sector provide their sensor systems to have their sensors tested in cooperation with the TÜV.

scholarly journals Anosognosia in People with Cognitive Impairment: Association with Cognitive Deficits and Behavioral Disturbances

2015 ◽  
Vol 5 (1) ◽  
pp. 42-50 ◽  
Author(s):  
Antonella De Carolis ◽  
Virginia Cipollini ◽  
Valentina Corigliano ◽  
Anna Comparelli ◽  
Micaela Sepe-Monti ◽  
...  
Keyword(s):  
Cognitive Impairment ◽  
Cognitive Deficits ◽  
Rating Scale ◽  
Motor Behavior ◽  
Psychiatric Symptoms ◽  
Early Stage ◽  
Functional Anatomy ◽  
Night Time ◽  
Behavioral Disturbances ◽  
The Relationship

Aims: To investigate, in a group of subjects at an early stage of cognitive impairment, the relationship between anosognosia and both cognitive and behavioral symptoms by exploring the various domains of insight. Methods: One hundred and eight subjects affected by cognitive impairment were consecutively enrolled. The level of awareness was evaluated by means of the Clinical Insight Rating Scale (CIRS). Psychiatric symptoms were evaluated using the Italian version of the Neuropsychiatric Inventory (NPI), whereas memory (memory index, MI) and executive (executive index, EI) functions were explored using a battery of neuropsychological tests and qualified by means of a single composite cognitive index score for each function. Results: A significant positive correlation between the total NPI score and global anosognosia score was found. Furthermore, both the MI and EI scores were lower in subjects with anosognosia than in those without anosognosia (p < 0.001 and p < 0.007, respectively). When the single domains of the CIRS were considered, anosognosia of reason of visit correlated with the EI score (r = -0.327, p = 0.01) and night-time behavioral disturbances (r = 0.225; p = 0.021); anosognosia of cognitive deficit correlated with depression (r = -0.193; p = 0.049) and the MI score (r = -0.201; p = 0.040); anosognosia of functional deficit correlated with the MI score (r = -0.257; p = 0.008), delusions (r = 0.232; p = 0.015) and aberrant motor behavior (r = 0.289; p = 0.003); anosognosia of disease progression correlated with the MI score (r = -0.236; p = 0.015), agitation (r = 0.247; p = 0.011), aberrant motor behavior (r = 0.351; p = 0.001) and night-time behavioral disturbances (r = 0.216; p = 0.027). Conclusions: Our study suggests that, in the early stage of cognitive impairment, anosognosia is associated with both cognitive deficits and behavioral disorders according to the specific functional anatomy of the symptoms.

Investigating the Relationship between Company Competitiveness and Environmental Regulation in European Food Processing: Results of a Matched Firm Comparison

1998 ◽  
Vol 30 (9) ◽  
pp. 1585-1602 ◽  
Author(s):  
D M W N Hitchens ◽  
J E Birnie ◽  
A McGowan ◽  
U Triebswetter ◽  
A Cottica
Keyword(s):  
Environmental Regulation ◽  
Food Processing ◽  
Value Added ◽  
Effluent Treatment ◽  
Environmental Costs ◽  
The European Union ◽  
The Republic ◽  
The Cost ◽  
The Relationship ◽  
Regulation Costs

The authors use a method of matched-plant comparisons between food processing firms in Germany, Italy, Northern Ireland, and the Republic of Ireland to investigate the relationship between environmental regulation and company competitiveness across the European Union. Comparative competitiveness was indicated by measures of value-added per employee, physical productivity, export share, and employment growth. The cost of water supply (public or well), effluent treatment (in-plant treatment and/or sewerage system), and disposal of sludge and packaging were also compared. Total environmental costs in Germany, Italy, and Ireland were small: usually less than 1% of turnover. Compared with the Irish firms, German companies had relatively high environmental costs as well as productivity levels. There was, however, a lack of a clear relationship between company competitiveness and the size of regulation costs: in Ireland and Italy environmental costs were similar but German firms had much higher productivity; compared with German counterparts, Italian firms had lower environmental costs but higher productivity.

Sign in / Sign up

Export Citation Format

Share Document