scholarly journals Determination of Effect of Well Parameters Using Pressure Derivative for Horizontal Wells in Layered Reservoir

Author(s):  
Oloro John

Effect of well parameters using pressure derivative distribution of horizontal wells in a layered reservoir which is subjected simultaneously by two drives mechanism was carried out using source function.Results of the study shows that pay thickness hD, well length and wellbore radius of a particular layer affect the pressure derivative distribution .

Author(s):  
M. I. Epov ◽  
◽  
V. N. Glinskikh ◽  
M. N. Nikitenko ◽  
K. V. Sukhorukova ◽  
...  

The work is devoted to the substantiation of new geophysical technology for mapping the Bazhenovskaya Formation based on an impulsive electromagnetic sounding from wells. Theoretically shown the possibility of its application to study the formation from highly inclined and subhorizontal wells drilled in the Upper and Middle Jurassic formations. Numerical modeling of the signals in realistic geoelectric models of the Bazhenov Formation with real well trajectories is carried out on the example of the East Surgut field. The calculations have established that the determination of spatial locations of the top and bottom of the beds is possible when using different-length sondes. Zones of high sensitivity of the full magnetic field matrix to the boundaries with a sufficient signal level at considerable distance, even with a small sonde length, are determined. It is theoretically established that pulsed sounding of the Bazhenov Formation from the Upper and Middle Jurassic reservoirs is feasible for both mapping the boundaries of the formation and tracing its lateral variability.


2007 ◽  
Author(s):  
Philippe Jean Gauthier ◽  
Hassan Hussain ◽  
John Bowling ◽  
John Ernest Edwards ◽  
Bernd Herold

2011 ◽  
Vol 367 ◽  
pp. 385-392
Author(s):  
E. Steve Adewole

When a reservoir experiences water influx, the actual source of the water often cannot be ascertained with precision. Thus well work over measures to minimize the water may not be easy to fashion. Bottom water encroaches through the bottom of the reservoir and rises vertically, appearing in all the wells in the field at the same time, if the wells experience the same production histories. This further makes work over difficult, more so, if there are other external fluid influences akin to a top gas. However, if the arrival time is known, then factors affecting bottom water movement, with or without any other contiguous top gas, may be studied with a view to fashioning an effective work over to mitigate premature water arrival into the well. Horizontal wells are already known to delay encroaching water breakthrough time. For a cross flow layered reservoir completed with a horizontal well in each layer, flow dynamics will certainly be different from a single layer reservoir due to differences in individual layer, layers fluid, wellbore and interface properties and rate histories. In this paper, theoretical expressions for predicting dimensionless breakthrough times of horizontal wells in a two layered reservoir of architecture like letter ‘B’, experiencing bottom water drive mechanism of different patterns, with or without a top gas, are derived. The theoretical breakthrough times are based on dimensionless pressure and dimensionless pressure derivative distributions of each identified model. Twenty-seven (28) different models emerged as the total of the different models possible.


2020 ◽  
Author(s):  
Michael Ojah ◽  
Emumena Enuma ◽  
Collins Onah ◽  
Oduh Prince ◽  
Steve Adewole

2018 ◽  
Vol 140 (9) ◽  
Author(s):  
Youwei He ◽  
Shiqing Cheng ◽  
Jiazheng Qin ◽  
Yang Wang ◽  
Zhiming Chen ◽  
...  

Field data indicate production profile along horizontal wells is nonuniform. This paper develops an analytical model of multisegment horizontal wells (MSHWs) to estimate rate distribution along horizontal wellbore, interpret the effective producing length (EPL), and identify underperforming horizontal sections using bottom-hole pressure (BHP) data. Pressure solutions enable to model an MSHW with nonuniform distribution of length, spacing, rate, and skin factor. The solution is verified with the analytical solution in commercial software. Type curves are generated to analyze the pressure-transient behavior. The second radial-flow (SRF) occurs for the MSHWs, and the duration of SRF depends on interference between segments. The pressure-derivative curve during SRF equals to 0.5/Np (Np denotes the number of mainly producing segments (PS)) under weak interference between segments. The calculated average permeability may be Np times lower than accurate value when the SRF is misinterpreted as pseudoradial-flow regime. The point (0, 0, h/2) are selected as the reference point, and symmetrical cases will generate different results, enabling us to distinguish them. Finally, field application indicates the potential practical application to identify the underperforming horizontal segments.


Sign in / Sign up

Export Citation Format

Share Document