scholarly journals SYNTHESIS OF GRAFT COPOLYMER FROM ETHYL METHACRYLATE ONTO DELIGNIFIED GREWIA OPTIVA FIBER

2021 ◽  
pp. 350-365
Author(s):  
Vivek Nandani ◽  
Kinnari Trived
Keyword(s):  
Ascorbic Acid ◽  
Graft Copolymer ◽  
Gravimetric Analysis ◽  
Electron Microscopic ◽  
Reaction Conditions ◽  
Ethyl Methacrylate ◽  
Grewia Optiva ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Ethyl methacrylate was grafted onto delignified Grewia optiva fiber using ascorbic acid/H2O2 as redox initiators in an aqueous medium. The reaction variables including concentration of ascorbic acid, H2O2, monomer and amount of backbone as well as time and temperature have been varied for establishing grafting. The influence of these reaction conditions on the grafting yield has been discussed. The overall activation energy of grafting has been calculated. The FT-IR spectroscopy, Thermal Gravimetric Analysis (TGA) and Scanning Electron Microscopic (SEM) techniques have been used for the characterization of graft copolymer.

scholarly journals Synthesis, Structures, Electrochemistry, and Catalytic Activity towards Cyclohexanol Oxidation of Mono-, Di-, and Polynuclear Iron(III) Complexes with 3-Amino-2-Pyrazinecarboxylate

2020 ◽  
Vol 10 (8) ◽  
pp. 2692
Author(s):  
Anirban Karmakar ◽  
Luísa M.D.R.S. Martins ◽  
Yuliya Yahorava ◽  
M. Fátima C. Guedes da Silva ◽  
Armando J. L. Pombeiro
Keyword(s):  
Coordination Polymer ◽  
Heterogeneous Catalysts ◽  
Saturated Calomel Electrode ◽  
Two Dimensional ◽  
Reaction Conditions ◽  
Ability To Act ◽  
Tert Butyl Hydroperoxide ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

The synthesis and characterization of a set of iron(III) complexes, viz. the mononuclear [Fe(L)3] (1) and [NHEt3][Fe(L)2(Cl)2] (2), the dinuclear methoxido-bridged [Fe(L)2(μ-OMe)]2.DMF.1.5MeOH (3), and the heteronuclear Fe(III)/Na(I) two-dimensional coordination polymer [Fe(N3)(μ-L)2(μ-O)1/2(Na)(μ-H2O)1/2]n (4), are reported. Reactions of 3-amino-2-pyrazinecarboxylic acid (HL) with iron(III) chloride under different reaction conditions were studied, and the obtained compounds were characterized by elemental analysis, Fourier Transform Infrared (FT-IR) spectroscopy, and X-ray single-crystal diffraction. Compound 1 is a neutral mononuclear complex, whereas 2 is mono-anionic with its charge being neutralized by triethylammonium cation. Compounds 3 and 4 display a di-methoxido-bridged dinuclear complex and a two-dimensional heterometallic Fe(III)/Na(I) polynuclear coordination polymer, respectively. Compounds 3 and 4 are the first examples of methoxido- and oxido-bridged iron(III) complexes, respectively, with 3-amino-2-pyrazinecarboxylate ligands. The electrochemical study of these compounds reveals a facile single-electron reversible Fe(III)-to-Fe(II) reduction at a positive potential of 0.08V vs. saturated calomel electrode (SCE), which is in line with their ability to act as efficient oxidants and heterogeneous catalysts for the solvent-free microwave-assisted peroxidative oxidation (with tert-butyl hydroperoxide) of cyclohexanol to cyclohexanone (almost quantitative yields after 1 h). Moreover, the catalysts are easily recovered and reused for five consecutive cycles, maintaining a high activity and selectivity.

scholarly journals Synthesis and Characterization of Graphene Oxide Derivatives via Functionalization Reaction with Hexamethylene Diisocyanate

Proceedings ◽  
2018 ◽  
Vol 3 (1) ◽  
pp. 8 ◽  
Author(s):  
José A. Luceño-Sánchez ◽  
Georgiana Maties ◽  
Camino Gonzalez-Arellano ◽  
Ana M. Díez-Pascual
Keyword(s):  
Graphene Oxide ◽  
High Performance ◽  
Organic Molecules ◽  
Hexamethylene Diisocyanate ◽  
Reaction Conditions ◽  
Ft Ir ◽  
Oxygen Groups ◽  
Functionalization Reaction ◽  
Ft Ir Spectroscopy

Graphene oxide (GO), the oxidized form of graphene, shows unique properties, such as strong mechanical strength, high thermal conductivity, amphiphilicity, and surface functionalization capability that make it very attractive in various fields, ranging from medicine to optoelectronic devices and solar cells. However, its insolubility in non-polar and polar aprotic solvents hinders some applications. To solve this issue, novel functionalization strategies are pursued. In this regard, the current study deals with the preparation and characterization of hexamethylene diisocyanate (HDI)-functionalized GO. Different reaction conditions were tested to optimize the functionalization degree (FD), and detailed characterization was conducted via Fourier-transformed infrared (FT-IR) spectroscopy to confirm the success of the functionalization reaction. The HDI-GO could further react with other organic molecules or polymers via the remaining oxygen groups, which makes them ideal candidates as nanofillers for high-performance GO-based polymer nanocomposites.

Synthesis and Characterization of Triethanolamine Borate

2013 ◽  
Vol 709 ◽  
pp. 28-31
Author(s):  
Cheng Xue Wang ◽  
Tian Tian Liang ◽  
Chun Qiao Wei
Keyword(s):  
Mass Spectrometry ◽  
Differential Scanning Calorimetry ◽  
Synthesis And Characterization ◽  
Spectroscopy Analysis ◽  
Scanning Calorimetry ◽  
Reaction Conditions ◽  
Different Types ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Starting with boric acid and triethanolamine , the effect of the different types of the water-carrying agent on the yield was invested, and influences of dosage of water-carrying agent ,the mole ratio of reactants, reaction time on yield were discussed, the optimized reaction conditions were confirmed. The structure of the product was described by Fourier transform-infrared (FT-IR) spectroscopy, NMR Spectroscopy analysis, mass spectrometry (MS) and thermodynamic properties was analyzed by differential scanning calorimetry (DSC) and thermogravimetry (TG).

scholarly journals Synthesis and Structural Characterization of (E)-4-[(2-Hydroxy-3-methoxybenzylidene)amino]butanoic Acid and Its Novel Cu(II) Complex

Molbank ◽  
10.3390/m1179 ◽  
2021 ◽  
Vol 2021 (1) ◽  
pp. M1179
Author(s):  
Eleftherios Halevas ◽  
Antonios Hatzidimitriou ◽  
Barbara Mavroidi ◽  
Marina Sagnou ◽  
Maria Pelecanou ◽  
...  
Keyword(s):  
Schiff Base ◽  
Gamma Aminobutyric Acid ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
Polymeric Compound ◽  
Bridging Ligands ◽  
1H And 13C Nmr ◽  
One Dimensional ◽  
Ft Ir

A novel Cu(II) complex based on the Schiff base obtained by the condensation of ortho-vanillin with gamma-aminobutyric acid was synthesized. The compounds are physico-chemically characterized by elemental analysis, HR-ESI-MS, FT-IR, and UV-Vis. The complex and the Schiff base ligand are further structurally identified by single crystal X-ray diffraction and 1H and 13C-NMR, respectively. The results suggest that the Schiff base are synthesized in excellent yield under mild reaction conditions in the presence of glacial acetic acid and the crystal structure of its Cu(II) complex reflects an one-dimensional polymeric compound. The molecular structure of the complex consists of a Cu(II) ion bound to two singly deprotonated Schiff base bridging ligands that form a CuN2O4 chelation environment, and a coordination sphere with a disordered octahedral geometry.

Diffuse Reflectance FT-IR Characterization of Active Sites under Reaction Conditions: The Production of Oxygenates in the CO/H2 Reaction

1994 ◽  
Vol 48 (10) ◽  
pp. 1208-1212 ◽  
Author(s):  
J. J. Benítez ◽  
I. Carrizosa ◽  
J. A. Odriozola
Keyword(s):  
Infrared Spectra ◽  
Active Sites ◽  
Diffuse Reflectance ◽  
Reaction Conditions ◽  
In Situ Drifts ◽  
Ft Ir

The reactivity of a Lu2O3-promoted Rh/Al2O3 catalyst in the CO/H2 reaction is reported. Methane, heavier hydrocarbons, methanol, and ethanol are obtained. In situ DRIFTS has been employed to record the infrared spectra under the actual reaction conditions. The structure of the observed COads DRIFTS bands has been resolved into its components. The production of oxygenates (methanol and ethanol) has been correlated with the results of the deconvolution calculation. Specific sites for the production of methanol and ethanol in the CO/H2 reaction over a Rh,Lu2O3/Al2O3 catalyst are proposed.

Photoacoustic FT-IR Spectroscopy of Natural Copper Patina

1995 ◽  
Vol 49 (10) ◽  
pp. 1516-1524 ◽  
Author(s):  
Alex O. Salnick ◽  
Werner Faubel
Keyword(s):  
Depth Distribution ◽  
Depth Profiling ◽  
Beam Deflection ◽  
City Hall ◽  
Spectral Bands ◽  
Special Sample Preparation ◽  
Ft Ir ◽  
Infrared Photoacoustic Spectroscopy ◽  
Ft Ir Spectroscopy

Fourier transform infrared photoacoustic spectroscopy (FT-IR/PAS) has proved to be a useful tool for nondestructive testing of copper corrosion layer (patina) formed in the atmosphere. The samples cut from a piece of the roof of the Stockholm City Hall were examined without any additional pretreatment. The components of the patina—brochantite Cu4(OH)6SO4, antlerite Cu3(OH)4SO4, and basic cupric carbonate Cu2CO3(OH)6 · H2O—as well as some other minerals were identified. The photothermal beam deflection (PBD) method was used for independent photoacoustic characterization of the samples. The depth profiling capability of FT-IR/PAS was used to determine the degree of photoacoustic saturation of the spectral bands and to evaluate the depth distribution of the main patina components. The technique thus compares favorably with more common approaches of patina examination which are more expensive and require special sample preparation.

FT-IR spectroscopy characterization of schwannoma: a case study

2016 ◽  
Author(s):  
Isabelle Ferreira ◽  
Lazaro P. M. Neto ◽  
Maurilio José das Chagas ◽  
Luís Felipe C. S. Carvalho ◽  
Laurita dos Santos ◽  
...  
Keyword(s):  
Ir Spectroscopy ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Electrochemically Synthesis and Characterization of Copolymers Based on 1, 4-Diethoxybenzene and 3, 4-Ethylenedioxythiophene

2011 ◽  
Vol 335-336 ◽  
pp. 989-993
Author(s):  
Mi Ouyang ◽  
Zhen Wei Yu ◽  
Yi Xu ◽  
Yu Jian Zhang ◽  
Cheng Zhang
Keyword(s):  
Cyclic Voltammetry ◽  
Ir Spectroscopy ◽  
Feed Ratio ◽  
Synthesis And Characterization ◽  
Monomer Mixture ◽  
Long Wavelength ◽  
H Nmr ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

Copolymers based on 1, 4-diethoxybenzene (DEB) and 3, 4-ethylenedioxythiophene (EDOT) were electrochemically synthesized and characterized. The structures of the copolymers were established by 1H NMR and FT-IR spectroscopy. The results indicated the final product was a copolymer instead of a blend or a composite. The physical properties were systematically investigated by cyclic voltammetry, UV-vis absorption and fluorescence. The PL maximum of copolymers presented obviously red-shift to long wavelength as the feed ratio of EDOT in monomer mixture increased.

Sign in / Sign up

Export Citation Format

Share Document