scholarly journals A new glance at the chemosphere of macroalgal–bacterial interactions: In situ profiling of metabolites in symbiosis by mass spectrometry

2021 ◽  
Vol 17 ◽  
pp. 1313-1322
Author(s):  
Marine Vallet ◽  
Filip Kaftan ◽  
Veit Grabe ◽  
Fatemeh Ghaderiardakani ◽  
Simona Fenizia ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Laser Scanning ◽  
High Resolution Mass Spectrometry ◽  
Imaging Techniques ◽  
Algal Growth ◽  
Laser Scanning Microscopy ◽  
Microbial Consortia ◽  
Confocal Laser ◽  
Metabolic Marker

Symbiosis is a dominant form of life that has been observed numerous times in marine ecosystems. For example, macroalgae coexist with bacteria that produce factors that promote algal growth and morphogenesis. The green macroalga Ulva mutabilis (Chlorophyta) develops into a callus-like phenotype in the absence of its essential bacterial symbionts Roseovarius sp. MS2 and Maribacter sp. MS6. Spatially resolved studies are required to understand symbiont interactions at the microscale level. Therefore, we used mass spectrometry profiling and imaging techniques with high spatial resolution and sensitivity to gain a new perspective on the mutualistic interactions between bacteria and macroalgae. Using atmospheric pressure scanning microprobe matrix-assisted laser desorption/ionisation high-resolution mass spectrometry (AP-SMALDI-HRMS), low-molecular-weight polar compounds were identified by comparative metabolomics in the chemosphere of Ulva. Choline (2-hydroxy-N,N,N-trimethylethan-1-aminium) was only determined in the alga grown under axenic conditions, whereas ectoine (1,4,5,6-tetrahydro-2-methyl-4-pyrimidinecarboxylic acid) was found in bacterial presence. Ectoine was used as a metabolic marker for localisation studies of Roseovarius sp. within the tripartite community because it was produced exclusively by these bacteria. By combining confocal laser scanning microscopy (cLSM) and AP-SMALDI-HRMS, we proved that Roseovarius sp. MS2 settled mainly in the rhizoidal zone (holdfast) of U. mutabilis. Our findings provide the fundament to decipher bacterial symbioses with multicellular hosts in aquatic ecosystems in an ecologically relevant context. As a versatile tool for microbiome research, the combined AP-SMALDI and cLSM imaging analysis with a resolution to level of a single bacterial cell can be easily applied to other microbial consortia and their hosts. The novelty of this contribution is the use of an in situ setup designed to avoid all types of external contamination and interferences while resolving spatial distributions of metabolites and identifying specific symbiotic bacteria.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

scholarly journals Influence of Aging on Corrosion Behaviour of the 6061 Cast Aluminium Alloy

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1821
Author(s):  
Ting He ◽  
Wei Shi ◽  
Song Xiang ◽  
Chaowen Huang ◽  
Ronald G. Ballinger
Keyword(s):  
Aluminium Alloy ◽  
Laser Scanning ◽  
Corrosion Behaviour ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Kelvin Probe ◽  
Force Microscopy ◽  
The Matrix ◽  
6061 Aluminium Alloy

The influence of AlFeSi and Mg2Si phases on corrosion behaviour of the cast 6061 aluminium alloy was investigated. Scanning Kelvin probe force microscopy (SKPFM), electron probe microanalysis (EPMA), and in situ observations by confocal laser scanning microscopy (CLSM) were used. It was found that Mg2Si phases were anodic relative to the matrix and dissolved preferentially without significantly affecting corrosion propagation. The AlFeSi phases’ influence on 6061 aluminium alloy local corrosion was greater than that of the Mg2Si phases. The corroded region width reached five times that of the AlFeSi phase, and the accelerating effect was terminated as the AlFeSi dissolved.

scholarly journals In Situ 3D-Imaging of the Inner Ear Synapses with a Cochlear Implant

Life ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 301
Author(s):  
Kathrin Malfeld ◽  
Nina Armbrecht ◽  
Holger A. Volk ◽  
Thomas Lenarz ◽  
Verena Scheper
Keyword(s):  
Cochlear Implant ◽  
Inner Ear ◽  
Laser Scanning ◽  
3D Imaging ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Sensory Cells ◽  
Residual Hearing ◽  
Preparation Methods

In recent years sensorineural hearing loss was found to affect not exclusively, nor at first, the sensory cells of the inner ear. The sensory cells’ synapses and subsequent neurites are initially damaged. Auditory synaptopathies also play an important role in cochlear implant (CI) care, as they can lead to a loss of physiological hearing in patients with residual hearing. These auditory synaptopathies and in general the cascades of hearing pathologies have been in the focus of research in recent years with the aim to develop more targeted and individually tailored therapeutics. In the current study, a method to examine implanted inner ears of guinea pigs was developed to examine the synapse level. For this purpose, the cochlea is made transparent and scanned with the implant in situ using confocal laser scanning microscopy. Three different preparation methods were compared to enable both an overview image of the cochlea for assessing the CI position and images of the synapses on the same specimen. The best results were achieved by dissection of the bony capsule of the cochlea.

scholarly journals In Situ Characterization ofNitrospira-Like Nitrite-Oxidizing Bacteria Active in Wastewater Treatment Plants

2001 ◽  
Vol 67 (11) ◽  
pp. 5273-5284 ◽  
Author(s):  
Holger Daims ◽  
Jeppe L. Nielsen ◽  
Per H. Nielsen ◽  
Karl-Heinz Schleifer ◽  
Michael Wagner
Keyword(s):  
Wastewater Treatment ◽  
16S Rrna ◽  
Laser Scanning ◽  
Wastewater Treatment Plants ◽  
Carbon Sources ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Rrna Gene ◽  
Phylogenetic Affiliation

ABSTRACT Uncultivated Nitrospira-like bacteria in different biofilm and activated-sludge samples were investigated by cultivation-independent molecular approaches. Initially, the phylogenetic affiliation of Nitrospira-like bacteria in a nitrifying biofilm was determined by 16S rRNA gene sequence analysis. Subsequently, a phylogenetic consensus tree of theNitrospira phylum including all publicly available sequences was constructed. This analysis revealed that the genusNitrospira consists of at least four distinct sublineages. Based on these data, two 16S rRNA-directed oligonucleotide probes specific for the phylum and genus Nitrospira, respectively, were developed and evaluated for suitability for fluorescence in situ hybridization (FISH). The probes were used to investigate the in situ architecture of cell aggregates ofNitrospira-like nitrite oxidizers in wastewater treatment plants by FISH, confocal laser scanning microscopy, and computer-aided three-dimensional visualization. Cavities and a network of cell-free channels inside the Nitrospiramicrocolonies were detected that were water permeable, as demonstrated by fluorescein staining. The uptake of different carbon sources byNitrospira-like bacteria within their natural habitat under different incubation conditions was studied by combined FISH and microautoradiography. Under aerobic conditions, theNitrospira-like bacteria in bioreactor samples took up inorganic carbon (as HCO3 − or as CO2) and pyruvate but not acetate, butyrate, and propionate, suggesting that these bacteria can grow mixotrophically in the presence of pyruvate. In contrast, no uptake by theNitrospira-like bacteria of any of the carbon sources tested was observed under anoxic or anaerobic conditions.

Monitoring the development of anaerobic biofilms using fluorescent in situ hybridization and confocal laser scanning microscopy

2000 ◽  
Vol 41 (12) ◽  
pp. 69-77 ◽  
Author(s):  
J. C. Araujo ◽  
G. Brucha ◽  
J. R. Campos ◽  
R. F. Vazoller
Keyword(s):  
In Situ Hybridization ◽  
Confocal Laser Scanning Microscopy ◽  
Fluorescent In Situ Hybridization ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser ◽  
Anaerobic Consortium

In this study we investigated the development of anaerobic biofilm using a laboratory reactor. We were especially interested in comparing the organization of anaerobic cells (particularly those that are very common in domestic sewage sludge) in a hydrophilic (glass) versus a hydrophobic (polypropylene) surface. Fluorescent in situ hybridization (FISH) with domain and group specific probes directed against 16S ribosomal RNA were used to quantify microbial composition in the biofilm. FISH and confocal laser scanning microscopy (CLSM) were used to elucidate spatial distribution of microbes in the biofilms. Two experiments were carried out, one with pure methanogenic organisms and the other with a microbial anaerobic consortium. The pure methanogen cultures, Methanobacterium formicicum (DSM 1535); Methanosaeta concilli (DSM 3671) and Methanosarcina barkeri (DSM 800) were used to seed the modified Robbins Device (MRD) to allow the development of biofilms on polypropylene and glass surfaces during the 9-days experiment. The results showed that all the three species were colonizing both surfaces after two and nine days of experimental period. In another experiment, with polypropylene coupons only, MRD was seeded with a microbial anaerobic consortium and biofilm formation was studied during 11 days. At the end of this period, the biofilms generated were of uneven thickness with areas of minimal or no surface coverage and areas where the biofilm attained a thickness of 7.0 to 9.0 μm as revealed by CLSM. The results showed that the modified Robbins Device together with the fluorescent in situ hybridization and confocal laser scanning microscopy are suitable tools to study anaerobic biofilm development in different kinds of support materials.

scholarly journals Dependence of Microcrack Behavior in Wood on Moisture Content during Drying

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Hiroyuki Yamamoto ◽  
Hiroki Sakagami ◽  
Yoshio Kijidani ◽  
Junji Matsumura
Keyword(s):  
Electrical Resistivity ◽  
Moisture Content ◽  
Wood Surface ◽  
Laser Scanning ◽  
Measurement Range ◽  
Cellular Level ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Sequential Images

A modified confocal laser scanning microscopy (CLSM) system was developed not only to observe the microcracks on the surface ofCryptomeria japonicaD. Donin situat the cellular level but also to obtain information about the moisture content (MC) of the wood surface by measuring the change in its electrical resistivity. The sequential images and changes in the electrical resistivity of the wood surface indicated that microcracks formed between the tracheid and ray parenchyma in the latewood region at >1.0E+ 07 Ω/sq (square). Microcracks formed when the MC of the wood surface was below the fiber saturation point determined through regression analysis of the surface electrical resistivity and MC. Most of the microcracks develop when the surface electrical resistivity ranged from 3.95E+ 10 to 3.60E+ 12 Ω/sq. When the surface MC was~2.5%, microcracks closed and the surface electrical resistivity was either~1.00E+ 15 Ω/sq or outside the measurement range. The modified CLSM and the method to measure the MC of the wood surface can be used to acquire information about the surface MC in specific areas shown in CLSM images. The findings indicated that the MC of the surface of the wood plays an important role in suppressing the emergence of microcracks in drying wood. The modified CLSM system and the method of measuring the MC of the surface of wood can be used to efficiently evaluate methods of drying wood and the quality of dried wood.

scholarly journals Protocol for rapid clearing and staining of fixed Arabidopsis ovules for improved imaging by confocal laser scanning microscopy

Plant Methods ◽  
2019 ◽  
Vol 15 (1) ◽  
Author(s):  
Rachele Tofanelli ◽  
Athul Vijayan ◽  
Sebastian Scholz ◽  
Kay Schneitz
Keyword(s):  
Laser Scanning ◽  
Developmental Stages ◽  
Imaging Techniques ◽  
Three Dimensional ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Imaging Data ◽  
Model Species ◽  
Cellular Models ◽  
Cellular Resolution

Abstract Background A salient topic in developmental biology relates to the molecular and genetic mechanisms that underlie tissue morphogenesis. Modern quantitative approaches to this central question frequently involve digital cellular models of the organ or tissue under study. The ovules of the model species Arabidopsis thaliana have long been established as a model system for the study of organogenesis in plants. While ovule development in Arabidopsis can be followed by a variety of different imaging techniques, no experimental strategy presently exists that enables an easy and straightforward investigation of the morphology of internal tissues of the ovule with cellular resolution. Results We developed a protocol for rapid and robust confocal microscopy of fixed Arabidopsis ovules of all stages. The method combines clearing of fixed ovules in ClearSee solution with marking the cell outline using the cell wall stain SCRI Renaissance 2200 and the nuclei with the stain TO-PRO-3 iodide. We further improved the microscopy by employing a homogenous immersion system aimed at minimizing refractive index differences. The method allows complete inspection of the cellular architecture even deep within the ovule. Using the new protocol we were able to generate digital three-dimensional models of ovules of various stages. Conclusions The protocol enables the quick and reproducible imaging of fixed Arabidopsis ovules of all developmental stages. From the imaging data three-dimensional digital ovule models with cellular resolution can be rapidly generated using image analysis software, for example MorphographX. Such digital models will provide the foundation for a future quantitative analysis of ovule morphogenesis in a model species.

Sign in / Sign up

Export Citation Format

Share Document