scholarly journals On the hydrolysis of diethyl 2-(perfluorophenyl)malonate

2020 ◽  
Vol 16 ◽  
pp. 1863-1868
Author(s):  
Ilya V Taydakov ◽  
Mikhail A Kiskin
Keyword(s):  
Acetic Acid ◽  
Malonic Acid ◽  
Diethyl Malonate ◽  
Toxic Substances ◽  
New Approach ◽  
Preparative Yield ◽  
Benzyl Halides ◽  
Acidic Conditions ◽  
Hydrolysis Of ◽  
Sodium Diethyl Malonate

Diethyl 2-(perfluorophenyl)malonate was synthesized in 47% isolated yield by the reaction of sodium diethyl malonate and hexafluorobenzene. The resulting compound was considered as a starting material for synthesizing 2-(perfluorophenyl)malonic acid by hydrolysis. It was found that the desired 2-(perfluorophenyl)malonic acid could not be obtained from this ester by hydrolysis, neither under basic nor under acidic conditions. Nevertheless, hydrolysis of the ester with a mixture of HBr and AcOH gave 2-(perfluorophenyl)acetic acid in a good preparative yield of 63%. A significant advantage of this new approach to 2-(perfluorophenyl)acetic acid is that handling toxic substances such as cyanides and perfluorinated benzyl halides is avoided.

Carbanions in Carbohydrate Chemistry: Synthesis of C-Glycosyl Malonates

1974 ◽  
Vol 52 (8) ◽  
pp. 1266-1279 ◽  
Author(s):  
Stephen Hanessian ◽  
Andre G. Pernet
Keyword(s):  
Acetic Acid ◽  
Malonic Acid ◽  
Diethyl Malonate ◽  
Major Product ◽  
Carbohydrate Chemistry ◽  
Anomeric Configuration ◽  
Bromide Ion ◽  
Chemical Correlation ◽  
Shift Reagents

The condensation of 2,3,4,6-tetra-O-acetyl-α-D-glucopyranosyl bromide with sodio diethyl malonate led to crystalline diethyl 2-(2,3,4,6-tetra-O-acetyl-β-D-glucopyranosyl) malonate. The corresponding dibenzyl ester proved to be a versatile intermediate for the preparation of crystalline β-D-glucopyranosyl malonic acid and β-D-glucopyranosyl acetic acid derivatives. The anomeric configuration in these C-glycosides was determined by a chemical correlation. With 2,3,4,6-tetra-O-acetyl- β-D-glucopyranosyl chloride and sodio diethyl malonate, the major product was a 1,2-O-ketal derivative resulting from an attack of the carbanion on the 1,2-acetoxonium ion. The condensation of 2,3,4,6-tetra-O-benzyl-α-D-glucopyranosyl bromide with sodio diethyl malonate was conducted with, and without added bromide ion and the mechanistic implications of the results are discussed. C-Glycosides were also prepared in the D-mannofuranose series and their transformation into the D-lyxofuranose series (anomeric mixture) is described. The utility of n.m.r. shift reagents, and an apparent differential complexation by Eu(DPM)3 and Eu(FOD)3-d27 is demonstrated.

Preparation and absolute configuration at C(20) of 21-nor-5α-cholan-24→20-olide derivatives

1981 ◽  
Vol 46 (1) ◽  
pp. 107-117 ◽  
Author(s):  
Vladimír Pouzar ◽  
Miroslav Havel
Keyword(s):  
Acetic Acid ◽  
Absolute Configuration ◽  
Nmr Spectra ◽  
Lithium Salt ◽  
Diethyl Malonate ◽  
Methyl Propionate ◽  
H Nmr ◽  
Sodium Diethyl Malonate

The lactones X and XI were obtained on reaction of the aldehyde III with lithium salt of methyl propionate followed by hydrogenation of the intermediary esters IV and V. Treatment of the epoxides XXI and XXII with dilithium salt of acetic acid yielded the lactones X and XI. These lactones were also obtained by reaction of the epoxides XXI and XXII with sodium diethyl malonate through intermediates XXIII and XXV. The preparation of α-methylene lactones XXVII and XXVIII is also described. The 20R configuration was established for the lactones X, XXIII and XXVII while the lactones XI, XXV and XXVIII were assigned the 20S configuration both on the basis of 1H-NMR spectra and chemical correlations.

Organic material dissolved during oxygen-alkali pulping of hot water extracted birch sawdust

TAPPI Journal ◽  
2015 ◽  
Vol 14 (4) ◽  
pp. 237-244 ◽  
Author(s):  
JONI LEHTO ◽  
RAIMO ALÉN
Keyword(s):  
Acetic Acid ◽  
Betula Pendula ◽  
Cooking Time ◽  
Hot Water ◽  
Partial Hydrolysis ◽  
Chemical Pulping ◽  
Black Liquors ◽  
Aliphatic Carboxylic Acids ◽  
Hydrolysis Of ◽  
Cooking Conditions

Untreated and hot water-treated birch (Betula pendula) sawdust were cooked by the oxygen-alkali method under the same cooking conditions (temperature = 170°C, liquor-to-wood ratio = 5 L/kg, and 19% sodium hydroxide charge on the ovendry sawdust). The pretreatment of feedstock clearly facilitated delignification. After a cooking time of 90 min, the kappa numbers were 47.6 for the untreated birch and 10.3 for the hot water-treated birch. Additionally, the amounts of hydroxy acids in black liquors based on the pretreated sawdust were higher (19.5-22.5g/L) than those in the untreated sawdust black liquors (14.8-15.5 g/L). In contrast, in the former case, the amounts of acetic acid were lower in the pretreated sawdust (13.3-14.8 g/L vs. 16.9-19.1 g/L) because the partial hydrolysis of the acetyl groups in xylan already took place during the hot water extraction of feedstock. The sulfur-free fractions in the pretreatment hydrolysates (mainly carbohydrates and acetic acid) and in black liquors (mainly lignin and aliphatic carboxylic acids) were considered as attractive novel byproducts of chemical pulping.

Preparation of Organized Mesoporous Silica from Sodium Metasilicate Solutions in Alkaline Medium Using Nonionic Surfactants

2003 ◽  
Vol 68 (10) ◽  
pp. 2019-2031 ◽  
Author(s):  
Markéta Zukalová ◽  
Jiří Rathouský ◽  
Arnošt Zukal
Keyword(s):  
Mesoporous Silica ◽  
Ethylene Oxide ◽  
Sodium Metasilicate ◽  
Spherical Particles ◽  
Structure Directing Agent ◽  
Inorganic Species ◽  
Poly Ethylene Oxide ◽  
Acidic Conditions ◽  
Poly Ethylene ◽  
Hydrolysis Of

A new procedure has been developed, which is based on homogeneous precipitation of organized mesoporous silica from an aqueous solution of sodium metasilicate and a nonionic poly(ethylene oxide) surfactant serving as a structure-directing agent. The decrease in pH, which induces the polycondensation of silica, is achieved by hydrolysis of ethyl acetate. Owing to the complexation of Na+ cations by poly(ethylene oxide) segments, assembling of the mesostructure appears to occur under electrostatic control by the S0Na+I- pathway, where S0 and I- are surfactant and inorganic species, respectively. As the complexation of Na+ cations causes extended conformation of poly(ethylene oxide) segments, the pore size and pore volume of organized mesoporous silica increase in comparison with materials prepared under neutral or acidic conditions. The assembling of particles can be fully separated from their solidification, which results in the formation of highly regular spherical particles of mesoporous silica.

scholarly journals The Hsp60 Protein of Helicobacter Pylori Exhibits Chaperone and ATPase Activities at Elevated Temperatures

BioChem ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 19-25
Author(s):  
Jose A. Mendoza ◽  
Julian L. Ignacio ◽  
Christopher M. Buckley
Keyword(s):  
Helicobacter Pylori ◽  
Heat Stress ◽  
Molecular Chaperone ◽  
Elevated Temperatures ◽  
Citrate Synthase ◽  
Gastric Epithelium ◽  
Acidic Conditions ◽  
H Pylori ◽  
Induced Aggregation ◽  
Hydrolysis Of

The heat-shock protein, Hsp60, is one of the most abundant proteins in Helicobacter pylori. Given its sequence homology to the Escherichia coli Hsp60 or GroEL, Hsp60 from H. pylori would be expected to function as a molecular chaperone in this organism. H. pylori is a type of bacteria that grows on the gastric epithelium, where the pH can fluctuate between neutral and 4.5, and the intracellular pH can be as low as 5.0. We previously showed that Hsp60 functions as a chaperone under acidic conditions. However, no reports have been made on the ability of Hsp60 to function as a molecular chaperone under other stressful conditions, such as heat stress or elevated temperatures. We report here that Hsp60 could suppress the heat-induced aggregation of the enzymes rhodanese, malate dehydrogenase, citrate synthase, and lactate dehydrogenase. Moreover, Hsp60 was found to have a potassium and magnesium-dependent ATPase activity that was stimulated at elevated temperatures. Although, Hsp60 was found to bind GTP, the hydrolysis of this nucleotide could not be observed. Our results show that Hsp60 from H. pylori can function as a molecular chaperone under conditions of heat stress.

scholarly journals Modified Rhamnogalacturonan-Rich Apple Pectin-Derived Structures: The Relation between Their Structural Characteristics and Emulsifying and Emulsion-Stabilizing Properties

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1586
Author(s):  
Jessika N. Humerez-Flores ◽  
Sarah H. E. Verkempinck ◽  
Clare Kyomugasho ◽  
Paula Moldenaers ◽  
Ann M. Van Loey ◽  
...  
Keyword(s):  
Emulsion Stability ◽  
Structural Characteristics ◽  
Stability Study ◽  
Natural Food ◽  
Apple Pectin ◽  
Oil Droplets ◽  
Food Ingredients ◽  
Acidic Conditions ◽  
Hydrolysis Of ◽  
Subsequent Acid

In the context of the increasing interest in natural food ingredients, the emulsifying and emulsion-stabilizing properties of three rhamnogalacturonan-rich apple pectin-derived samples were assessed by evaluating a range of physicochemical properties. An apple pectin (AP74) was structurally modified by a β-eliminative reaction to obtain a RG-I-rich pectin sample (AP-RG). Subsequent acid hydrolysis of AP-RG led to the generation of pectin material with partially removed side chains (in particular arabinose depleted) (AP-RG-hydrolyzed), thus exhibiting differences in rhamnose, arabinose, and galactose in comparison to AP-RG. All samples exhibited surface activity to some extent, especially under acidic conditions (pH 2.5). Furthermore, the viscosity of the samples was assessed in relation to their emulsion-stabilizing properties. In a stability study, it was observed that the non-degraded AP74 sample at pH 2.5 exhibited the best performance among all the apple pectin-derived samples evaluated. This emulsion presented relatively small oil droplets upon emulsion production and was less prone to creaming than the emulsions stabilized by the (lower molecular weight) RG-I-rich materials. The AP-RG and AP-RG-hydrolyzed samples presented a slightly better emulsion stability at pH 6.0 than at pH 2.5. Yet, neither pectin sample was considered having good emulsifying and emulsion-stabilizing properties, indicated by the presence of coalesced and flocculated oil droplets.

The synthesis of norbornanes with functionalized carbon substituents at a bridgehead. 1-(3-Oxonorborn-1-yl)ethanone and 1-(3-oxonorborn-1-yl)-2-propanone

1992 ◽  
Vol 70 (5) ◽  
pp. 1492-1505 ◽  
Author(s):  
Peter Yates ◽  
Magdy Kaldas
Keyword(s):  
Acetic Acid ◽  
Carboxylic Acid ◽  
Hydrogen Bromide ◽  
Tertiary Alcohol ◽  
Ethyl Bromoacetate ◽  
Second Molar ◽  
Molar Equivalent ◽  
Acid Lactone ◽  
Basic Hydrolysis ◽  
Hydrolysis Of

Treatment of 2-norobornene-1-carboxylic acid (7) with one equivalent of methyllithium in ether followed by a second molar equivalent after dilution with tetrahydrofuran gave 1-(norborn-2-en-lyl)ethanone (10) and only a trace of the tertiary alcohol 11. Reaction of 7 with formic acid followed by hydrolysis gave a 4:3 mixture of exo-3- and exo-2-hydroxynorbornane-1-carboxylic acid (16 and 17), whereas oxymercuration–demercuration gave only the exo-3-hydroxy isomer 16. Oxidation of 16 and 17 gave 3- and 2-oxonorbornane-1-carboxylic acid (27 and 29), respectively. Oxymercuration–demercuration of 10 gave exclusively 1-(exo-3-hydroxynorborn-1-yl)ethanone (30), which was also prepared by treatment of 16 with methyllithium in analogous fashion to that used for the conversion of 7 to 10. Oxidation of 30 gave 1-(3-oxonorborn-1-yl)ethanone (1). Dehydrobromination of exo-2-bromonorbornane-1-acetic acid and dehydration of 2-hydroxy-norbornane-2-acetic acid derivatives gave 1-(norborn-2-ylidene) acetic acid derivatives to the exclusion of norborn-2-ene-1 -acetic acid derivatives. Treatment of exo-5-acetyloxy-2-norobornanone (52) with ethyl bromoacetate and zinc gave ethyl exo-5-acetyloxy-2-hydroxynorbornane-(exo- and endo-2-acetate (53 and 54). Reaction of 53 with hydrogen bromide gave initially ethyl endo-3-acetyloxy-exo-6-bromonorbornane-1-acetate (59), which was subsequently converted to a mixture of 59 and its exo-3-acetyloxy epimer 61. Catalytic hydrogenation of this mixture gave a mixture of ethyl endo- and exo-3-acetyloxynorbornane-1 -acetate (62 and 63). Basic hydrolysis of this gave a mixture of the corresponding hydroxy acids, 70 and 71; the former was slowly converted to the latter at pH 5. Oxidation of the mixture of 70 and 71 gave 3-oxonorbornane-1-acetic acid (72). Treatment of the mixture with methyllithium as for 16 gave a mixture of 1-(endo- and exo-3-hydroxynorborn-1-yl)-2-propanone (73 and 74), which was oxidized to 1-(3-oxo-norborn-1-yl)-2-propanone (2). Reaction of exo-2-hydroxynorbornane-1-acetic acid lactone (75) with methyllithium in ether gave (1-(exo-2-hydroxynorborn-1-yl)-2-propanone (76), which on oxidation gave the 2-oxo isomer 78 of 2.

Improved synthesis of anti-sesquinorbornene

1984 ◽  
Vol 62 (9) ◽  
pp. 1840-1844 ◽  
Author(s):  
Karl R. Kopecky ◽  
Alan J. Miller
Keyword(s):  
Acetic Acid ◽  
Sulfuric Acid ◽  
Carboxylic Acid ◽  
Lead Tetraacetate ◽  
Carboxyl Group ◽  
Silver Acetate ◽  
Benzenesulfonyl Chloride ◽  
Methoxide Ion ◽  
Hydrolysis Of ◽  
Monomethyl Ester

Treatment of methyl hydrogen decahydro-1,4:5,8-exo,endo-dimethanonaphthalene-4a,8a-dicarboxylate with lead tetraacetate in benzene – acetic acid replaces the carboxyl group by an acetoxy group. Hydrolysis of this product with 25% sulfuric acid at 130 °C forms 8a-hydroxydecahydro-1,4:5,8-exo,endo-dimethanonaphthalene-4a-carboxylic acid 10. The reaction between 10 and benzenesulfonyl chloride in pyridine containing triethylamine at 95 °C produces anti-sesquinorbornene 1 in 34% yield. In the absence of triethylamine 1 is converted to the hydrochloride. The iodohydroperoxide of 1 is converted by silver acetate at 0 °C to the diketone in a luminescent reaction. The 1,2-dioxetane could not be isolated. Decahydro-1,4:5,8-exo,exo-dimethanonaphthalene-4a,8a-dicarboxylic anhydride is converted slowly by methoxide ion in methanol at 150 °C to the monomethyl ester which then undergoes demethylation. The isomeric exo,endo anhydride undergoes reaction readily with methoxide ion at 80 °C.

Sign in / Sign up

Export Citation Format

Share Document