scholarly journals Organometallic vs organic photoredox catalysts for photocuring reactions in the visible region

2018 ◽  
Vol 14 ◽  
pp. 3025-3046 ◽  
Author(s):  
Aude-Héloise Bonardi ◽  
Frédéric Dumur ◽  
Guillaume Noirbent ◽  
Jacques Lalevée ◽  
Didier Gigmes
Keyword(s):  
Organic Chemistry ◽  
Molecular Weight ◽  
3D Printing ◽  
High Performance ◽  
Polymer Networks ◽  
Visible Region ◽  
Polymer Chemistry ◽  
Packaging Materials ◽  
Drastic Reduction ◽  
Efficient Access

Recent progresses achieved in terms of synthetic procedures allow now the access to polymers of well-defined composition, molecular weight and architecture. Thanks to these recent progresses in polymer engineering, the scope of applications of polymers is far wider than that of any other class of material, ranging from adhesives, coatings, packaging materials, inks, paints, optics, 3D printing, microelectronics or textiles. From a synthetic viewpoint, photoredox catalysis, originally developed for organic chemistry, has recently been applied to the polymer synthesis, constituting a major breakthrough in polymer chemistry. Thanks to the development of photoredox catalysts of polymerization, a drastic reduction of the amount of photoinitiators could be achieved, addressing the toxicity and the extractability issues; high performance initiating abilities are still obtained due to the catalytic approach which regenerates the catalyst. As it is a fast-growing field, this review will be mainly focused on an overview of the recent advances concerning the development of organic and organometallic photoredox catalysts for the photoreticulation of multifunctional monomers for a rapid and efficient access to 3D polymer networks.

A high-performance oil-free backing pump for electron microscopes

1978 ◽  
Vol 36 (1) ◽  
pp. 110-111
Author(s):  
G.K.W. Balkau ◽  
E. Bez ◽  
J.L. Farrant
Keyword(s):  
Molecular Weight ◽  
Electron Microscope ◽  
Hot Spots ◽  
High Performance ◽  
Carbonaceous Material ◽  
Contamination Rate ◽  
Low Molecular Weight ◽  
Principal Source ◽  
Rotary Pumps ◽  
Electron Microscopes

The earliest account of the contamination of electron microscope specimens by the deposition of carbonaceous material during electron irradiation was published in 1947 by Watson who was then working in Canada. It was soon established that this carbonaceous material is formed from organic vapours, and it is now recognized that the principal source is the oil-sealed rotary pumps which provide the backing vacuum. It has been shown that the organic vapours consist of low molecular weight fragments of oil molecules which have been degraded at hot spots produced by friction between the vanes and the surfaces on which they slide. As satisfactory oil-free pumps are unavailable, it is standard electron microscope practice to reduce the partial pressure of organic vapours in the microscope in the vicinity of the specimen by using liquid-nitrogen cooled anti-contamination devices. Traps of this type are sufficient to reduce the contamination rate to about 0.1 Å per min, which is tolerable for many investigations.

Preparation and Characterization of the High Molecular Weight [3H]Hyaluronic Acid

1992 ◽  
Vol 57 (10) ◽  
pp. 2151-2156 ◽  
Author(s):  
Peter Chabreček ◽  
Ladislav Šoltés ◽  
Hynek Hradec ◽  
Jiří Filip ◽  
Eduard Orviský
Keyword(s):  
Molecular Weight ◽  
Hyaluronic Acid ◽  
High Molecular Weight ◽  
Methyl Bromide ◽  
High Performance ◽  
Hydrogen Atoms ◽  
Isolation And Characterization ◽  
Labelling Procedure ◽  
Enzymatic Depolymerization

Two methods for the preparation of high molecular weight [3H]hyaluronic acid were investigated. In the first one, hydrogen atoms in the molecule were replaced by tritium. This isotopic substitution was performed in aqueous solution using Pd/CaCO3 as the catalyst. In the second method, the high molecular weight hyaluronic acid was alkylated with [3H]methyl bromide in liquid ammonia at a temperature of -33.5 °C. High-performance gel permeation chromatographic separation method was used for the isolation and characterization of the high molecular weight [3H]hyaluronic acid. Molecular weight parameters for the labelled biopolymers were Mw = 128 kDa, Mw/Mn = 1.88 (first method) and Mw = 268 kDa, Mw/Mn = 1.55 (second method). The high molecular weight [3H]hyaluronic acid having Mw = 268 kDa was degraded further by specific hyaluronidase. Products of the enzymatic depolymerization were observed to be identical for both, labelled and cold biopolymer. This finding indicates that the described labelling procedure using [3H]methyl bromide does not induce any major structural rearrangements in the molecule.

Rational Design of a High Performance and Robust Solar Evaporator via 3D‐Printing Technology

2021 ◽  
pp. 2102649
Author(s):  
Sourav Chaule ◽  
Jongha Hwang ◽  
Seong‐Ji Ha ◽  
Jihun Kang ◽  
Jong‐Chul Yoon ◽  
...  
Keyword(s):  
3D Printing ◽  
High Performance ◽  
Rational Design ◽  
Printing Technology ◽  
3D Printing Technology

scholarly journals High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing

2018 ◽  
Vol 39 (7) ◽  
pp. 1700809 ◽  
Author(s):  
Xiao Kuang ◽  
Zeang Zhao ◽  
Kaijuan Chen ◽  
Daining Fang ◽  
Guozheng Kang ◽  
...  
Keyword(s):  
3D Printing ◽  
High Speed ◽  
High Performance ◽  
Two Stage ◽  
Thermosetting Polymers

scholarly journals Composition of low-molecular-weight glutenin subunits in common wheat (Triticum aestivum L.) and their effects on the rheological properties of dough

2021 ◽  
Vol 16 (1) ◽  
pp. 641-652
Author(s):  
Sławomir Franaszek ◽  
Bolesław Salmanowicz
Keyword(s):  
Molecular Weight ◽  
Rheological Properties ◽  
Common Wheat ◽  
High Performance ◽  
Triticum Aestivum L ◽  
Quality Parameters ◽  
Low Molecular Weight ◽  
Wheat Varieties ◽  
Breeding Lines ◽  
Capillary Zone

Abstract The main purpose of this research was the identification and characterization of low-molecular-weight glutenin subunit (LMW-GS) composition in common wheat and the determination of the effect of these proteins on the rheological properties of dough. The use of capillary zone electrophoresis and reverse-phase high-performance liquid chromatography has made it possible to identify four alleles in the Glu-A3 and Glu-D3 loci and seven alleles in the Glu-B3 locus, encoding LMW-GSs in 70 varieties and breeding lines of wheat tested. To determine the technological quality of dough, analyses were performed at the microscale using a TA.XT Plus Texture Analyzer. Wheat varieties containing the Glu-3 loci scheme (Glu-A3b, Glu-A3f at the Glu-A3 locus; Glu-B3a, Glu-B3b, Glu-B3d, Glu-B3h at the Glu-B3 locus; Glu-D3a, Glu-D3c at the Glu-D3 locus) determined the most beneficial quality parameters.

scholarly journals Investigating Lignin-Derived Monomers and Oligomers in Low-Molecular-Weight Fractions Separated from Depolymerized Black Liquor Retentate by Membrane Filtration

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2887
Author(s):  
Kena Li ◽  
Jens Prothmann ◽  
Margareta Sandahl ◽  
Sara Blomberg ◽  
Charlotta Turner ◽  
...  
Keyword(s):  
Molecular Weight ◽  
High Performance ◽  
Membrane Filtration ◽  
Black Liquor ◽  
Complex Mixture ◽  
Value Added ◽  
Kraft Pulping ◽  
Classification Model ◽  
Low Molecular Weight ◽  
Chemical Complexity

Base-catalyzed depolymerization of black liquor retentate (BLR) from the kraft pulping process, followed by ultrafiltration, has been suggested as a means of obtaining low-molecular-weight (LMW) compounds. The chemical complexity of BLR, which consists of a mixture of softwood and hardwood lignin that has undergone several kinds of treatment, leads to a complex mixture of LMW compounds, making the separation of components for the formation of value-added chemicals more difficult. Identifying the phenolic compounds in the LMW fractions obtained under different depolymerization conditions is essential for the upgrading process. In this study, a state-of-the-art nontargeted analysis method using ultra-high-performance supercritical fluid chromatography coupled to high-resolution multiple-stage tandem mass spectrometry (UHPSFC/HRMSn) combined with a Kendrick mass defect-based classification model was applied to analyze the monomers and oligomers in the LMW fractions separated from BLR samples depolymerized at 170–210 °C. The most common phenolic compound types were dimers, followed by monomers. A second round of depolymerization yielded low amounts of monomers and dimers, while a high number of trimers were formed, thought to be the result of repolymerization.

scholarly journals Effects of Molecular Weight of Functionalized Liquid Butadiene Rubber as a Processing Aid on the Properties of SSBR/Silica Compounds

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 850
Author(s):  
Donghyuk Kim ◽  
Byungkyu Ahn ◽  
Kihyun Kim ◽  
JongYeop Lee ◽  
Il Jin Kim ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Anionic Polymerization ◽  
High Performance ◽  
Crosslink Density ◽  
Functional Group ◽  
Vital Role ◽  
Butadiene Rubber ◽  
Molecular Weights ◽  
Mooney Viscosity ◽  
Silica Dispersion

Liquid butadiene rubber (LqBR) which used as a processing aid play a vital role in the manufacturing of high-performance tire tread compounds. However, the studies on the effect of molecular weight, microstructure, and functionalization of LqBR on the properties of compounds are still insufficient. In this study, non-functionalized and center-functionalized liquid butadiene rubbers (N-LqBR and C-LqBR modified with ethoxysilyl group, respectively) were synthesized with low vinyl content and different molecular weights using anionic polymerization. In addition, LqBR was added to the silica-filled SSBR compounds as an alternative to treated distillate aromatic extract (TDAE) oil, and the effect of molecular weight and functionalization on the properties of the silica-filled SSBR compound was examined. C-LqBR showed a low Payne effect and Mooney viscosity because of improved silica dispersion due to the ethoxysilyl functional group. Furthermore, C-LqBR showed an increased crosslink density, improved mechanical properties, and reduced organic matter extraction compared to the N-LqBR compound. LqBR reduced the glass transition temperature (Tg) of the compound significantly, thereby improving snow traction and abrasion resistance compared to TDAE oil. Furthermore, the energy loss characteristics revealed that the hysteresis loss attributable to the free chain ends of LqBR was dominant.

scholarly journals Design aspects of (super)hydrophobic mesh based oil-collecting device with improved efficiency

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Weikang Xu ◽  
Zhentao Zhang ◽  
Xiaomei Cai ◽  
Yazhen Hong ◽  
Tianliang Lin ◽  
...  
Keyword(s):  
3D Printing ◽  
Water Surface ◽  
High Performance ◽  
Oil Spills ◽  
Real Life ◽  
Oily Wastewater ◽  
Coating Materials ◽  
The Past ◽  
Oil Storage ◽  
Future Success

AbstractEffective treatment of frequent oil spills and endless discharged oily wastewater is crucial for the ecosystem and human health. In the past two decades, the collection of oil from water surface has been widely studied through the simple fabrication of superhydrophobic meshes with various coating materials, but little attention is paid to the design aspects of the meshes based oil-collecting device and practical oil collection. Here, 3D-printing devices with different configurations of (super)hydrophobic meshes, circular truncated cone (CTC), cylinder and inverted CTC, and the same inverted cone-shaped structure (below the meshes for temporary oil storage) are investigated. Results demonstrate that the CTC meshes based device especially for an oblate one not only shows higher stability and discharge of the collected oils than previous reports, but also allows floating oils to enter the (super)hydrophobic mesh faster. We anticipate that future success in developing high-performance (super)hydrophobic meshes and the further optimization of the CTC mesh-based device parameters will make our proposed device more practical for the treatment of real-life oil spills.

Sign in / Sign up

Export Citation Format

Share Document