scholarly journals Sugar-based micro/mesoporous hypercross-linked polymers with in situ embedded silver nanoparticles for catalytic reduction

2017 ◽  
Vol 13 ◽  
pp. 1212-1221 ◽  
Author(s):  
Qing Yin ◽  
Qi Chen ◽  
Li-Can Lu ◽  
Bao-Hang Han
Keyword(s):  
Chemical Structure ◽  
Catalytic Reduction ◽  
Chemical Reduction ◽  
Dimethyl Acetal ◽  
Porous Polymer ◽  
Activity Factor ◽  
Similar Chemical ◽  
Good Catalytic Activity ◽  
Formaldehyde Dimethyl Acetal

Porous hypercross-linked polymers based on perbenzylated monosugars (SugPOP-1–3) have been synthesized by Friedel–Crafts reaction using formaldehyde dimethyl acetal as an external cross-linker. Three perbenzylated monosugars with similar chemical structure were used as monomers in order to tune the porosity. These obtained polymers exhibit microporous and mesoporous features. The highest Brunauer–Emmett–Teller specific surface area for the resulting polymers was found to be 1220 m2 g−1, and the related carbon dioxide storage capacity was found to be 14.4 wt % at 1.0 bar and 273 K. As the prepared porous polymer SugPOP-1 is based on hemiacetal glucose, Ag nanoparticles (AgNPs) can be successfully incorporated into the polymer by an in situ chemical reduction of freshly prepared Tollens’ reagent. The obtained AgNPs/SugPOP-1 composite demonstrates good catalytic activity in the reduction of 4-nitrophenol (4-NP) with an activity factor k a = 51.4 s−1 g−1, which is higher than some reported AgNP-containing composite materials.

Functional Poly(p-Xylylene)s via Chemical Reduction of Poly(p-Phenylene Vinylene)s

2019 ◽  
Author(s):  
Ain Uddin ◽  
Weifan Sang ◽  
Yong Gao ◽  
Kyle Plunkett
Keyword(s):  
Film Formation ◽  
Chemical Reduction ◽  
Water Soluble ◽  
Phenylene Vinylene ◽  
Polymer Modification ◽  
Polymer Backbone ◽  
Crosslinking Process ◽  
Conducting Membranes ◽  
In Situ Crosslinking

The synthesis of poly(p-xylylene)s (PPXs) with sidechains containing alkyl bromide functionality, and their post-polymer modification, is described. The PPXs were prepared by a diimide hydrogenation of poly(p-phenylene vinylene)s (PPVs) that were originally synthesized by a Gilch polymerization. The polymer backbone reduction was carried out with hydrazine hydrate in toluene at 80 °C to provide polymers with the sidechain-containing bromide functionality intact. To demonstrate post-polymer modification of the sidechains, the resulting PPX polymers were modified with trimethylamine to form tetraalkylammonium ion functionality and were evaluated as anion conducting membranes. While PPX homopolymers containing tetralkylammonium ions were completely water soluble and not able to form valuable films, PPX copolymers containing mixed tetraalkylammonium ions and hydrophobic chains were capable of film formation and alkaline stability. In addition, an in situ crosslinking process that used N,N,N',N'-tetramethyl-1,6-hexanediamine during the tetraalkylammonium formation of brominated PPX polymers was also evaluated and gave reasonable films with conductivities of ~10 mS-cm-1.

Functional Poly(p-Xylylene)s via Chemical Reduction of Poly(p-Phenylene Vinylene)s

2019 ◽  
Author(s):  
Ain Uddin ◽  
Weifan Sang ◽  
Yong Gao ◽  
Kyle Plunkett
Keyword(s):  
Film Formation ◽  
Chemical Reduction ◽  
Water Soluble ◽  
Phenylene Vinylene ◽  
Polymer Modification ◽  
Polymer Backbone ◽  
Crosslinking Process ◽  
Conducting Membranes ◽  
In Situ Crosslinking

The synthesis of poly(p-xylylene)s (PPXs) with sidechains containing alkyl bromide functionality, and their post-polymer modification, is described. The PPXs were prepared by a diimide hydrogenation of poly(p-phenylene vinylene)s (PPVs) that were originally synthesized by a Gilch polymerization. The polymer backbone reduction was carried out with hydrazine hydrate in toluene at 80 °C to provide polymers with the sidechain-containing bromide functionality intact. To demonstrate post-polymer modification of the sidechains, the resulting PPX polymers were modified with trimethylamine to form tetraalkylammonium ion functionality and were evaluated as anion conducting membranes. While PPX homopolymers containing tetralkylammonium ions were completely water soluble and not able to form valuable films, PPX copolymers containing mixed tetraalkylammonium ions and hydrophobic chains were capable of film formation and alkaline stability. In addition, an in situ crosslinking process that used N,N,N',N'-tetramethyl-1,6-hexanediamine during the tetraalkylammonium formation of brominated PPX polymers was also evaluated and gave reasonable films with conductivities of ~10 mS-cm-1.

In-situ stabilization of silver nanoparticles in polymer hydrogels for enhanced catalytic reduction of macro and micro pollutants

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Luqman Ali Shah ◽  
Rida Javed ◽  
Mohammad Siddiq ◽  
Iram BiBi ◽  
Ishrat Jamil ◽  
...  
Keyword(s):  
Catalytic Reduction ◽  
Thermo Gravimetric Analysis ◽  
Activation Parameters ◽  
Reduction Reaction ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
In Situ Stabilization ◽  
Hybrid Hydrogels ◽  
Kinetics Of

AbstractThe in-situ stabilization of Ag nanoparticles is carried out by the use of reducing agent and synthesized three different types of hydrogen (anionic, cationic, and neutral) template. The morphology, constitution and thermal stability of the synthesized pure and Ag-entrapped hybrid hydrogels were efficiently confirmed using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and thermo gravimetric analysis (TGA). The prepared hybrid hydrogels were used in the decolorization of methylene blue (MB) and azo dyes congo red (CR), methyl Orange (MO), and reduction of 4-nitrophenol (4-NP) and nitrobenzene (NB) by an electron donor NaBH4. The kinetics of the reduction reaction was also assessed to determine the activation parameters. The hybrid hydrogen catalysts were recovered by filtration and used continuously up to six times with 98% conversion of pollutants without substantial loss in catalytic activity. It was observed that these types of hydrogel systems can be used for the conversion of pollutants from waste water into useful products.

scholarly journals Further insights into the Fe(ii) reduction of 2-line ferrihydrite: a semi in situ and in situ TEM study

2020 ◽  
Vol 2 (10) ◽  
pp. 4938-4950
Author(s):  
Mario Alberto Gomez ◽  
Ruonan Jiang ◽  
Miao Song ◽  
Dongsheng Li ◽  
Alan Scott Lea ◽  
...  
Keyword(s):  
Catalytic Reduction ◽  
In Situ Tem ◽  
Nano Crystalline

The catalytic reduction of nano-crystalline 2-line ferrihydrite with Fe(ii)(aq) doesn't occur via direct pathways but rather through new intermediate steps.

Chemically reduced graphene oxide-coated knitted fabric imparted conductivity and outstanding hydrophobicity

2021 ◽  
pp. 004051752199547
Author(s):  
Min Hou ◽  
Xinghua Hong ◽  
Yanjun Tang ◽  
Zimin Jin ◽  
Chengyan Zhu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Chemical Reduction ◽  
Knitted Fabric ◽  
Mesh Structure ◽  
Reduced Graphene ◽  
Chemically Reduced Graphene Oxide ◽  
Modified Hummers Method

Functionalized knitted fabric, as a kind of flexible, wearable, and waterproof material capable of conductivity, sensitivity and outstanding hydrophobicity, is valuable for multi-field applications. Herein, the reduced graphene oxide (RGO)-coated knitted fabric (polyester/spandex blended) is prepared, which involves the use of graphite oxide (GO) by modified Hummers method and in-situ chemical reduction with hydrazine hydrate. The treated fabric exhibits a high electrical conductivity (202.09 S/cm) and an outstanding hydrophobicity (140°). The outstanding hydrophobicity is associated with the morphology of the fabric and fiber with reference to pseudo-infiltration. These properties can withstand repeated bending and washing without serious deterioration, maintaining good electrical conductivity (35.70 S/cm) and contact angle (119.39°) after eight standard washing cycles. The material, which has RGO architecture and continuous loop mesh structure, can find wide use in smart garment applications.

scholarly journals Poly(N-isopropylacrylamide-co-methacrylic acid) microgel stabilized copper nanoparticles for catalytic reduction of nitrobenzene

2015 ◽  
Vol 33 (3) ◽  
pp. 627-634 ◽  
Author(s):  
Zahoor H. Farooqi ◽  
Zonarah Butt ◽  
Robina Begum ◽  
Shanza Rhauf Khan ◽  
Ahsan Sharif ◽  
...  
Keyword(s):  
Copper Nanoparticles ◽  
Methacrylic Acid ◽  
Catalytic Reduction ◽  
Aqueous Media ◽  
Activation Parameters ◽  
Reducing Agent ◽  
Different Temperatures ◽  
Entropy Of Activation ◽  
Micro Reactors

Abstract Poly(N-isopropylacrylamide-co-methacrylic acid) microgels [p(NIPAM-co-MAAc)] were synthesized by precipitation polymerization of N-isopropylacrylamide and methacrylic acid in aqueous medium. These microgels were characterized by dynamic light scattering and Fourier transform infrared spectroscopy. These microgels were used as micro-reactors for in situ synthesis of copper nanoparticles using sodium borohydride (NaBH4) as reducing agent. The hybrid microgels were used as catalysts for the reduction of nitrobenzene in aqueous media. The reaction was performed with different concentrations of cat­alyst and reducing agent. A linear relationship was found between apparent rate constant (kapp) and amount of catalyst. When the amount of catalyst was increased from 0.13 to 0.76 mg/mL then kapp was increased from 0.03 to 0.14 min-1. Activation parameters were also determined by performing reaction at two different temperatures. The catalytic process has been discussed in terms of energy of activation, enthalpy of activation and entropy of activation. The synthesized particles were found to be stable even after 14 weeks and showed catalytic activity for the reduction of nitrobenzene.

scholarly journals Toxicity and Neuropharmacological Effects of Elenine

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Eduardo Navarro ◽  
S. J. Alonso ◽  
R. Navarro
Keyword(s):  
Open Field ◽  
Field Test ◽  
Chemical Structure ◽  
Open Field Test ◽  
Control Group ◽  
General Behaviour ◽  
Similar Chemical ◽  
Sedative Effects ◽  
Traction Test ◽  
Central Depressant

Elenine is the aglycone of elenoside, a cytotoxic arylnaphthalene lignan (NSC 644013-W/1) derived fromJusticia hyssopifolia. (Family: Acanthaceae). Elenoside is a β-D-glucoside, with a similar chemical structure to etoposide, exhibiting central depressant activity. In the present study, elenine was given to mice and rats at doses of 10, 20, and 40 mg/kg. Acute toxicity (24 h) and general behaviour in mice was studied as well as its effects on muscular relaxant activity, locomotor activity (Varimex test), and the open-field test and were compared with 10 mg/kg of chlorpromazine. Elenine produced a reduction in the permanence time in muscular relaxant activity (traction test). Spontaneous activity was lower in the Varimex test. The ambulation and rearing were lower compared with the control group, and an increase in boluses was observed in the open-field test. Thus, it can be concluded that elenine has central sedative effects at lower doses than those used with elenoside and has a possible application in conditions of anxiety.

scholarly journals A Review on the Catalytic Hydrogenation of Bromate in Water Phase

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 365
Author(s):  
Jose Luis Cerrillo ◽  
Antonio Eduardo Palomares
Keyword(s):  
Catalytic Activity ◽  
Ion Exchange ◽  
Reaction Mechanisms ◽  
Catalytic Reduction ◽  
Environmental Concern ◽  
Chemical Reduction ◽  
Catalyst Stability ◽  
Polluted Water ◽  
Water Composition

The presence of bromate in water sources generates environmental concern due to its toxicity for humans. Diverse technologies, like membranes, ion exchange, chemical reduction, etc., can be employed to treat bromate-polluted water but they produce waste that must be treated. An alternative to these technologies can be the catalytic reduction of bromate to bromide using hydrogen as a reducing agent. In this review, we analyze the research published about this catalytic technology. Specifically, we summarize and discuss about the state of knowledge related to (1) the different metals used as catalysts for the reaction; (2) the influence of the support on the catalytic activity; (3) the characterization of the catalysts; (4) the reaction mechanisms; and (5) the influence of the water composition in the catalytic activity and in the catalyst stability. Based on published papers, we analyze the strength and weaknesses of this technique and the possibilities of using this reaction for the treatment of bromate-polluted water as a sustainable process.

Sign in / Sign up

Export Citation Format

Share Document