scholarly journals Linear-g-hyperbranched and cyclodextrin-based amphiphilic block copolymer as a multifunctional nanocarrier

2014 ◽  
Vol 10 ◽  
pp. 2696-2703 ◽  
Author(s):  
Yamei Zhao ◽  
Wei Tian ◽  
Guang Yang ◽  
Xiaodong Fan
Keyword(s):  
Drug Release ◽  
Drug Loading ◽  
Controlled Drug Release ◽  
Release Mechanism ◽  
The Novel ◽  
Reversible Addition ◽  
Diagnostic Agents ◽  
Triblock Polymer ◽  
One Step ◽  
Multifunctional Nanocarriers

In this paper, a novel, multifunctional polymer nanocarrier was designed to provide adequate volume for high drug loading, to afford a multiregion encapsulation ability, and to achieve controlled drug release. An amphiphilic, triblock polymer (ABC) with hyperbranched polycarbonsilane (HBPCSi) and β-cyclodextrin (β-CD) moieties were first synthesized by the combination of a two-step reversible addition-fragmentation transfer polymerization into a pseudo-one-step hydrosilylation and quaternization reaction. The ABC then self-assembled into stable micelles with a core–shell structure in aqueous solution. These resulting micelles are multifunctional nanocarriers which possess higher drug loading capability due to the introduction of HBPCSi segments and β-CD moieties, and exhibit controlled drug release based on the diffusion release mechanism. The novel multifunctional nanocarrier may be applicable to produce highly efficient and specialized delivery systems for drugs, genes, and diagnostic agents.

scholarly journals Hybrid mesoporous silica with controlled drug release

2019 ◽  
Vol 84 (9) ◽  
pp. 1027-1039 ◽  
Author(s):  
László Almásy ◽  
Ana-Maria Putz ◽  
Qiang Tian ◽  
Gennady Kopitsa ◽  
Tamara Khamova ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Mesoporous Silica ◽  
Drug Loading ◽  
Sol Gel ◽  
Nitrogen Adsorption ◽  
Controlled Drug Release ◽  
Ammonium Bromide ◽  
Structure Directing Agent ◽  
One Step

The mesoporous silica particles were prepared by the sol?gel method in one-step synthesis, in acidic conditions, from tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES), varying the mole ratio of the silica precursors. Nitric acid was used as catalyst at room temperature and hexadecyltrimethyl ammonium bromide (CTAB) as structure directing agent. Optical properties, porosity and microstructure of the materials in function of the MTES/TEOS ratio were evaluated using infrared spectroscopy, nitrogen adsorption and small angle X-ray scattering. All materials showed the ordered pore structure and the high specific surfaces, making them suitable as the drug delivery systems. Drug loading and release tests using ketoprofen were performed to assess their performance for drug delivery applications. The amount of the methylated precursor used in the synthesis had little effect on the drug loading capacity, but had a strong influence on the initial rate of the drug release.

scholarly journals Combined Magnetoliposome Formation and Drug Loading in One Step for Efficient Alternating Current-Magnetic Field Remote-Controlled Drug Release

2020 ◽  
Vol 12 (4) ◽  
pp. 4295-4307 ◽  
Author(s):  
Maria Eugenia Fortes Brollo ◽  
Ana Domínguez-Bajo ◽  
Andrea Tabero ◽  
Vicente Domínguez-Arca ◽  
Victor Gisbert ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Drug Release ◽  
Drug Loading ◽  
Controlled Drug Release ◽  
Alternating Current ◽  
One Step ◽  
Current Magnetic Field

scholarly journals Synthesis and Characterization of Lyophilized Chitosan-Based Hydrogels Cross-Linked with Benzaldehyde for Controlled Drug Release

2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Fouad Damiri ◽  
Yahya Bachra ◽  
Chaimaa Bounacir ◽  
Asmae Laaraibi ◽  
Mohammed Berrada
Keyword(s):  
Ascorbic Acid ◽  
Drug Release ◽  
Drug Loading ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Tween 20 ◽  
Release Mechanism ◽  
Synthetic Process ◽  
Chitosan Salt

In this study, chitosan-based hydrogels were produced by incorporating three drugs with a different solubility into a polymer matrix. The lyophilized chitosan salt was prepared using an innovative and less-expensive synthetic process by the freeze-drying technique. Firstly, the three drugs (caffeine, ascorbic acid, and 5-fluorouracil (5-FU)) were selected as model drugs to test the in vitro release behavior of the hydrogel. The drugs were solubilized in chitosan salt, lyophilized, and cross-linked with benzaldehyde involving the formation of a Schiff base with (–C=N-) linkage to produce a physical hydrogel. Subsequently, the physicochemical properties of N-benzyl chitosan and lyophilized chitosan salt were evaluated by Fourier-transform infrared (FTIR) spectra, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The intrinsic viscosity of the conventional chitosan was determined by the Mark–Houwink–Sakurada equation. Moreover, the kinetics of hydrogel swelling and drug release were studied by the UV-visible method at physiological conditions (pH = 7.4 at 37°C). The results show that lyophilized N-benzyl chitosan had a maximum swelling ratio of 720 ± 2% by immersion in phosphate-buffered saline solutions (PBS) (pH = 7.4 at 37°C). In vitro drug releases were evaluated in PBS, and the obtained results show that the maximum drug release after 24 h was 42% for caffeine, 99% for 5-FU, and 94% for ascorbic acid. Then, to optimize the cumulative release of caffeine, Tween 20 was added and 98% as a release percentage was obtained. The drug-loading results were investigated with the Korsmeyer–Peppas kinetic model and applied to determine the drug release mechanism.

scholarly journals ATRP-based synthesis of a pH-sensitive amphiphilic block polymer and its self-assembled micelles with hollow mesoporous silica as DOX carriers for controlled drug release

RSC Advances ◽  
2021 ◽  
Vol 11 (48) ◽  
pp. 29986-29996
Author(s):  
Xiuxiu Qi ◽  
Hongmei Yan ◽  
Yingxue Li
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Self Assembly ◽  
Drug Loading ◽  
Controlled Drug Release ◽  
Ph Sensitive ◽  
Core Shell ◽  
Assembly Process ◽  
Block Polymer ◽  
Hollow Mesoporous Silica

A pH-sensitive core–shell nanoparticle (HMS@C18@PSDMA-b-POEGMA) was developed via a self-assembly process as the carrier of anticancer drug doxorubicin (DOX) for drug loading and controlled release.

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

scholarly journals Evaluation and Optimization of Influence of Permeability Property and Concentration of Polymethacrylic Polymers on Microspheres of Metformin HCl

2014 ◽  
Vol 12 (2) ◽  
pp. 131-141 ◽  
Author(s):  
Ikramul Hasan ◽  
Shovan Paul ◽  
Sharmin Akhter ◽  
Navid Jubaer Ayon ◽  
Md Selim Reza
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Drug Loading ◽  
Liquid Paraffin ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Release Kinetic ◽  
Eudragit Rlpo ◽  
Metformin Hcl

Metformin HCl microspheres were prepared with the aim of increasing its bioavailability and decreasing gastrointestinal side effects by means of sustained action. Eudragit RSPO and Eudragit RLPO, polymers of different permeability characteristics were used to prepare different microspheres. Emulsification solvent evaporation technique using acetone as the internal phase and liquid paraffin as the external phase was the method of choice. Six formulations were prepared using two polymers. The effect of drug loading and polymeric property on the surface morphology, entrapment efficiency, particle size and release characteristics of the microspheres were examined. FTIR and DSC studies established compatibility of the drug with the polymers. SEM studies clearly revealed the effect of drug loading and polymeric nature on the surface morphology of the microspheres. Entrapment efficiencies were within 77.09-97.11% and particle size of all the batches were in the acceptable range. Release data were treated with different mathematical kinetic models. The drug release profile showed that Eudragit RSPO and Eudragit RLPO have opposite effect on drug release. On the other hand, increase in drug loading results in increased drug release. Kinetic modeling of in vitro dissolution profiles revealed that the drug release mechanism varies from diffusion controlled to anomalous type. Dhaka Univ. J. Pharm. Sci. 12(2): 131-141, 2013 (December) DOI: http://dx.doi.org/10.3329/dujps.v12i2.17611

Pseudolatex from STR 5L Block Rubber for Drug Delivery

2013 ◽  
Vol 844 ◽  
pp. 166-169 ◽  
Author(s):  
Prapaporn Boonme ◽  
Kamon Panrat ◽  
Wiwat Pichayakorn
Keyword(s):  
Drug Release ◽  
Contact Allergy ◽  
Drug Loading ◽  
Methyl Cellulose ◽  
Controlled Drug Release ◽  
Colloidal Dispersion ◽  
Mineral Oil ◽  
Lauryl Sulfate ◽  
Drug Encapsulation

Pseudolatex is colloidal dispersion containing spherical solid or semisolid particles and can be prepared from any existing thermoplastic water-insoluble polymers. It is useful for drug encapsulation and controlled drug release. In this study, pseudolatex base was prepared from STR 5L block rubber. The various parameters such as speed and time of homogenization, type and concentration of surfactants, amount of mineral oil, and type of drug loading were studied to prepare the stable pseudolatex. These preparations were evaluated in particle size, pH, viscosity, emulsion stability, drug encapsulation, and in vitro drug release. It was found that the most stable formulation contained 3.5% block rubber, 0.2% methyl cellulose, 6% mineral oil, 4% dibutyl phthalate, 2% sodium lauryl sulfate, and 2% Uniphen P-23 using the speed and time of homogenizer as 20000 rpm and 20 minutes, respectively. Furthermore, the pseudolatex bases reduced the protein impurity form 0.5516% to 0.2108% in formulation with mineral oil and to 0.1781% in formulation without mineral oil, that could decrease contact allergy caused by the protein allergens. Dichloromethane residues in pseudolatex bases were 22.05 mg/L and 7.85 mg/L in formulations with and without mineral oil, respectively, that were satisfied from USP recommendation value of lower than 600 mg/L. Propranolol HCl, lidocaine HCl, and indomethacin could be loaded into pseudolatex only in the concentration of 1%. However, lidocaine base in the concentration of 1-5% could be loaded into pseudolatex which had the similar physical properties and stability to pseudolatex base. The in vitro drug release from pseudolatexs provided the controlled drug release for more than 24 hr.

Understanding drug release from PCL/gelatin electrospun blends

2016 ◽  
Vol 31 (6) ◽  
pp. 933-949 ◽  
Author(s):  
Hrishikesh R Munj ◽  
John J Lannutti ◽  
David L Tomasko
Keyword(s):  
Drug Release ◽  
Biomedical Applications ◽  
Drug Loading ◽  
Release Mechanism ◽  
Electrospun Fibers ◽  
Electrospun Scaffolds ◽  
Bioactive Properties ◽  
Complex Process ◽  
Rhodamine B Dye ◽  
Polymer Erosion

Electrospinning is one of the efficient processes to fabricate polymeric fibrous scaffolds for several biomedical applications. Several studies have published to demonstrate drug release from electrospun scaffolds. Blends of natural and synthetic electrospun fibers provide excellent platform to combine mechanical and bioactive properties. Drug release from polymer blends is a complex process. Drug release from polymer can be dominated by one or more of following mechanisms: polymer erosion, relaxation, and degradation. In this study, electrospun polycaprolactone (PCL)–gelatin blends are investigated to understand release mechanism of Rhodamine B dye. Also, this article summarizes the effect of high-pressure carbon dioxide on drug loading and release from PCL–gelatin fibers. Results indicate that release media diffusion is a dominant mechanism for PCL–gelatin electrospun fibers. Thickness of electrospun mat becomes critical for blends with gelatin. As gelatin is highly soluble in water and has tendency of gelation, it affects diffusion of release media in and out of scaffold. This article is a key step forward in understanding release from electrospun blends.

Micelles with Cyclic Poly(ε-caprolactone) Moieties: Greater Stability, Larger Drug Loading Capacity, and Slower Degradation Property for Controlled Drug Release

Langmuir ◽  
2019 ◽  
Vol 35 (38) ◽  
pp. 12509-12517 ◽  
Author(s):  
Guiying Kang ◽  
Lu Sun ◽  
Yuping Liu ◽  
Chao Meng ◽  
Wei Ma ◽  
...  
Keyword(s):  
Drug Release ◽  
Drug Loading ◽  
Controlled Drug Release ◽  
Loading Capacity
Sign in / Sign up

Export Citation Format

Share Document