scholarly journals Low Density Multi-principal Element Alloy from Al-Mg-Ca-Si-B System

2019 ◽  
Vol 70 (7) ◽  
pp. 2315-2320
Author(s):  
Victor Geanta ◽  
Robert Ciocoiu ◽  
Ionelia Voiculescu
Keyword(s):  
Chemical Composition ◽  
Chemical Element ◽  
Mechanical Characteristics ◽  
Cast Alloy ◽  
Complex Oxides ◽  
Scientific Paper ◽  
Chemical Compositions ◽  
Low Density ◽  
Principal Element ◽  
Research Stage

The scientific paper presents a numerical modeling of the chemical composition for the optimization of the multicomponent light alloys in the Al-Mg-Ca-Si-B system. The effects of the proportion of each chemical element on the main characteristics of the alloy based on the mixture rule and the correlation between the melting temperature and the modulus of elasticity were analyzed numerically. The model results has reveals that even other factors must be taken into account, i.e. the mechanical characteristics which varied significantly with changing of chemical compositions. A compromise was set, by slightly increasing the density to acquire better mechanical characteristics. The selected chemical composition was then used to obtain the new low density alloy. In current research stage we conclude that the as cast alloy comprises an inhomogeneous solid solution and complex oxides. Further studies are ongoing on the experimental alloy in various states (homogenization annealed and processed by plastic deformation).

Weldability - Behavior of Welded Reinforcement

2019 ◽  
Vol 70 (10) ◽  
pp. 3469-3472
Keyword(s):  
Mechanical Properties ◽  
Chemical Composition ◽  
Mechanical Characteristics ◽  
Mechanical Performance ◽  
Current Work ◽  
Carbon Equivalent ◽  
Work Process ◽  
Ultimate Limit

Weldability involves two aspects: welding behavior of components and safety in operation. The two aspects will be reduced to the mechanical characteristics of the elements and to the chemical composition. In the case of steel reinforcing rebar’s, it is reduces to the percentage of Cech(carbon equivalent) and to the mechanical characteristics: the yielding limit, the ultimate limit, and the elongations which after that represent the ductility class in which the re-bars is framed. The paper will present some types of steel reinforcing rebar’s with its mechanical characteristics and the welding behavior of those elements. In the current work, process-related behavior of welded reinforcement, joint local and global mechanical properties, and their correlation with behavior of normal reinforcement and also the mechanical performance resulted in this type of joints. Keywords: welding behavior, ultimate limit, reinforcing rebar’s

High-throughput screening of the chemical composition distribution of random styrene-butyl acrylate copolymers

e-Polymers ◽  
2005 ◽  
Vol 5 (1) ◽  
Author(s):  
Iván García Romero ◽  
Harald Pasch
Keyword(s):  
Chemical Composition ◽  
High Throughput ◽  
Butyl Acrylate ◽  
High Throughput Screening ◽  
Size Exclusion ◽  
Chemical Compositions ◽  
Composition Distribution ◽  
Chemical Composition Distribution ◽  
Exclusion Chromatography ◽  
Liquid Chromatographic

AbstractThe development of high-throughput liquid chromatographic techniques for the analysis of styrene-butyl acrylate (SBA) copolymers is discussed. The analysis time in size-exclusion chromatography (SEC) can be reduced to about 3 min per sample when high-throughput SEC columns and high flow rates are used. In gradient HPLC, small columns with improved separation efficiencies can be applied. The time requirements can be decreased to less than 2 min per sample. Using the high-throughput HPLC technique, the chemical composition distribution of high-conversion SBA copolymers can be analyzed in a fast and efficient way. The calibration of HPLC separation is conducted by coupling the HPLC system with FTIR through the LC-transform interface. A comparison of the chemical compositions of the copolymers obtained by 1H NMR, off-line FTIR and coupled HPLCFTIR verifies the accuracy of the high-throughput copolymer analysis approach.

Mechanical Behavior for some Cobalt Alloys

2015 ◽  
Vol 1114 ◽  
pp. 9-12
Author(s):  
Alexandru Ghiban ◽  
Brandusa Ghiban ◽  
Cristina Maria Borţun ◽  
Nicolae Serban ◽  
Mihai Buzatu
Keyword(s):  
Tensile Strength ◽  
Chemical Composition ◽  
Mechanical Behavior ◽  
Mechanical Characteristics ◽  
Fractographic Analysis ◽  
Cobalt Alloys ◽  
Dental Alloys ◽  
Bending Tests ◽  
Longitudinal Modulus

Four compositions of some usually commercial dental alloys were investigated in order to determine the mechanical characteristics and fractographic analysis of tensile and bending tests surfaces. A correlation between chemical composition (either molybdenum or molybdenum and chromium contents) and mechanical characteristics (longitudinal modulus, tensile strength and elongation) were finally done.

Relationship between Chemical Composition and the Amount of Phosphorus Adsorbed

2011 ◽  
Vol 695 ◽  
pp. 141-144
Author(s):  
Eiji Watanabe ◽  
Kaori Nishizawa ◽  
Masaki Maeda
Keyword(s):  
Chemical Composition ◽  
Chemical Compositions ◽  
Natural Materials ◽  
Adsorption Behaviors ◽  
Relationship Of

Relationship of the adsorption behaviors of phosphorus with several natural materials and artificial HAS-clay with various chemical compositions was investigated. The amounts of phosphorus adsorbed by them were closely related with the contents of aluminum in the material. It was found that the higher the aluminum contents of material, larger the amount of phosphorus were adsorbed.

scholarly journals Soil and Leaf Nutrients Drivers on the Chemical Composition of the Essential Oil of Siparuna muricata (Ruiz & Pav.) A. DC. from Ecuador

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2949
Author(s):  
Juan I. Burneo ◽  
Ángel Benítez ◽  
James Calva ◽  
Pablo Velastegui ◽  
Vladimir Morocho
Keyword(s):  
Gas Chromatography ◽  
Chemical Composition ◽  
Secondary Metabolites ◽  
Essential Oil ◽  
Chemical Elements ◽  
Climatic Conditions ◽  
Gas Chromatography Mass Spectrometry ◽  
Chemical Compositions ◽  
Leaf Nutrients ◽  
First Time

Chemical compositions of plants are affected by the initial nutrient contents in the soil and climatic conditions; thus, we analyzed for the first time the effects of soil and leaf nutrients on the compositions of the essential oils (EOs) of Siparuna muricata in four different localities in Ecuador. EOs were obtained by hydrodistillation and analyzed by gas chromatography/mass spectrometry (GC/MS) and a gas chromatography/flame ionization detector (GC/FID). Enantiomeric distribution by GC/MS was determined, modifying the enantiomeric separation of β-pinene, limonene, δ-elemene, β-bourbonene, cis-cadina-1 (6), 4-diene and atractylone. A total of 44 compounds were identified. The most representative for L1 were guaiol, atractylone and 4-diene; for L2, cis-cadina-1(6),4-diene and myrcene; for L3, atractylone, myrcene and germacrene B; and finally, L4 germacrene B, myrcene and cis-cadina-1(6),4-diene. Correlations between soil- leaf chemical elements such as Al, Ca, Fe, Mg, Mn, N and Si in the different localities were significant with chemical composition of the essential oil of Siparuna muricata; however, correlations between soil and leaf K, P, and Na were not significant. Cluster and NMDS analysis showed high dissimilarity values of secondary metabolites between four localities related with changes in soil- leaf nutrients. Thus, the SIMPER routine revealed that not all secondary metabolites contribute equally to establishing the differences in the four localities, and the largest contributions are due to differences in guaiol, cis-cadina-1(6),4-diene, atractylone and germacrene. Our investigation showed for the first time the influences of altitude and soil- leaf chemical elements in the chemical composition of the EOs of S. muricata.

scholarly journals Relationship between the Optical Properties and Chemical Composition of Urban Aerosol Particles in Lithuania

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Julija Pauraite ◽  
Kristina Plauškaitė ◽  
Vadimas Dudoitis ◽  
Vidmantas Ulevicius
Keyword(s):  
Optical Properties ◽  
Chemical Composition ◽  
Organic Aerosol ◽  
Single Scattering ◽  
Chemical Compositions ◽  
Spectra Analysis ◽  
Average Value ◽  
Aerosol Mass ◽  
In Situ Investigation

In situ investigation results of aerosol optical properties (absorption and scattering) and chemical composition at an urban background site in Lithuania (Vilnius) are presented. Investigation was performed in May-June 2017 using an aerosol chemical speciation monitor (ACSM), a 7-wavelength Aethalometer and a 3-wavelength integrating Nephelometer. A positive matrix factorisation (PMF) was used for the organic aerosol mass spectra analysis to characterise the sources of ambient organic aerosol (OA). Five OA factors were identified: hydrocarbon-like OA (HOA), biomass-burning OA (BBOA), more and less oxygenated OA (LVOOA and SVOOA, respectively), and local hydrocarbon-like OA (LOA). The average absorption (at 470 nm) and scattering (at 450 nm) coefficients during the entire measurement campaign were 16.59 Mm−1 (standard deviation (SD) = 17.23 Mm−1) and 29.83 Mm−1 (SD = 20.45 Mm−1), respectively. Furthermore, the absorption and scattering Angström exponents (AAE and SAE, respectively) and single-scattering albedo (SSA) were calculated. The average AAE value at 470/660 nm was 0.97 (SD = 0.16) indicating traffic-related black carbon (BCtr) dominance. The average value of SAE (at 450/700 nm) was 1.93 (SD = 0.32) and could be determined by the submicron particle (PM1) dominance versus the supermicron ones (PM > 1 µm). The average value of SSA was 0.62 (SD = 0.13). Several aerosol types showed specific segregation in the SAE versus SSA plot, which underlines different optical properties due to various chemical compositions.

scholarly journals Comparison of chemical compositions of essential oils isolated by hydrodistillation from wild thyme (Thymus serpyllum L.) with use of Deryng and Clevenger apparatus

2014 ◽  
Vol 60 (2) ◽  
pp. 7-17 ◽  
Author(s):  
Aneta Wesołowska ◽  
Monika Grzeszczuk ◽  
Dorota Jadczak
Keyword(s):  
Chemical Composition ◽  
Essential Oil ◽  
Essential Oils ◽  
Methyl Ether ◽  
The Other ◽  
Chemical Compositions ◽  
Distillation Apparatus ◽  
Ms Analysis ◽  
Wild Thyme ◽  
Thymus Serpyllum

Abstract The aim of the studies conducted in 2012-2013 was to compare the chemical composition of essential oils isolated from wild thyme (Thymus serpyllum L.) by hydrodistillation in Deryng and Clevenger apparatus. GC-MS analysis of the isolated oils revealed that carvacrol (42.81-45.24%), γ-terpinene (7.68-9.04%), β-caryophyllene (5.28-9.10%), β-bisabolene (5.76-6.91%) and carvacrol methyl ether (4.92-6.09%) were the major components of all the samples. On the basis of the obtained data it was proved that the type of distillation apparatus had no significant effect on the content of the main essential oil constituents of wild thyme. However, based on the means for both years of the study it was proved that hydrodistillation in Deryng apparatus was more effective for carvacrol concentration, while in Clevenger apparatus - for y-terpinene and carvacrol methyl ether concentration. The type of distillation apparatus had no significant effect on the content of the other essential oil constituents.

Sign in / Sign up

Export Citation Format

Share Document