scholarly journals Economics of increased bit life in high temperature wells by cooling with Top-drive Drilling System while RIH. Field results of geothermal wells and an estimate of effects for a high temperature oil well.

2000 ◽  
Vol 65 (5) ◽  
pp. 403-416
Author(s):  
Seiji Saito ◽  
Sumio Sakuma
Keyword(s):  
High Temperature ◽  
Oil Well ◽  
Geothermal Wells ◽  
Drilling System ◽  
Bit Life

Drilling and Completion Techniques for High-Temperature Geothermal Wells

2014 ◽  
Vol 953-954 ◽  
pp. 688-691
Author(s):  
Jia Nian Xu
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
Cement Slurry ◽  
Repeated Impact ◽  
Well Drilling ◽  
Ratio Effect ◽  
Geothermal Wells ◽  
Bit Life ◽  
High Temperature Compressive Strength

The high temperature formation, strong abrasiveness, numerous fractures and caves are the main problems of high temperature geothermal well drilling, cementing. Cone bit teeth repeated impact tests show that bit life mainly affected by tooth shape, materials, solid tooth technology. Setting special materials around the teeth and adjusting the fitting wring will improve the life of cone bit teeth. Study of quartz sand amount and fineness ratio effect on cement high temperature compressive strength, permeability show that optimization of high temperature cement slurry can improve the high temperature leakage zone cementing sealing and long-term effectiveness.

scholarly journals Unit Quaternion Description Method for Detecting High-Temperature Geothermal Well Drilling Conditions

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Hongyan Li ◽  
Pengtao Wang ◽  
Bin Liu ◽  
Xianyu Zhang ◽  
Hai Huang ◽  
...  
Keyword(s):  
High Temperature ◽  
Detection Efficiency ◽  
Principal Component ◽  
Kernel Principal Component Analysis ◽  
Unit Quaternion ◽  
Well Drilling ◽  
Geothermal Well ◽  
Geothermal Wells ◽  
Time Required ◽  
Drilling Conditions

When the typically utilized method for detecting the drilling conditions of high-temperature geothermal wells is applied, the detection takes a long time, the detection results are inconsistent with the actual conditions, and there are problems such as low detection efficiency and large detection deviation. Therefore, a method for detecting the drilling conditions of high-temperature geothermal wells described by a unit quaternion is proposed. Based on quaternion theory, the quaternion model of the position and attitude is constructed to obtain the drilling attitude. According to the analysis results and the basic principle of kernel principal component analysis, a model is built to realize the detection of high-temperature geothermal well drilling conditions. The experimental results show that in many iterations, the time required is stable and lower than that of other comparison methods, and the detection errors are all lower than 10%. The proposed method has high detection efficiency and low detection errors.

Performance Evaluation of Polycarboxylic Acid Dispersant for Oil Well Cementing

2020 ◽  
Vol 993 ◽  
pp. 1341-1350
Author(s):  
Xiu Jian Xia ◽  
Yong Jin Yu ◽  
Jian Zhou Jin ◽  
Shuo Qiong Liu ◽  
Ming Xu ◽  
...  
Keyword(s):  
High Temperature ◽  
Salt Resistance ◽  
Strength Development ◽  
Fluid Loss ◽  
Oil Well ◽  
Polycarboxylic Acid ◽  
Cement Slurry ◽  
Deep Wells ◽  
Oil Well Cement ◽  
Well Cement

The conventional oil-well cement dispersant has the characteristics of poor dispersion at high temperature, poor compatibility with other additives, and environmental pollution during the production process. In this article, with ultra-early strong polyether monomer, acrylic acid, 2-acrylamine-2-methylpropyl sulfonic acid, sodium methacrylate as copolymer monomers, an environmentally friendly polycarboxylic acid dispersant, DRPC-1L, was prepared by the aqueous solution free-radical polymerization. The chemical composition and thermal stability of the synthetic copolymer were characterized by FTIR and TGA techniques. The evaluation results show that DRPC-1L has a wide temperature range (30~210 °C), good salt-resistance and dispersing effect. It can significantly improve the rheological performance of cement slurry, and it is well matched with oil-well cement additives such as fluid loss agent, retarder and so on. Moreover, it is beneficial to the mechanical strength development of set cement, especially the early compressive strength. It can also inhibit the abnormal gelation phenomenon of cement slurry, flash set, that occurs during high temperature thickening experiments, which plays an important role in enhancing the comprehensive performance of cement slurry. Consequently, the novel polycarboxylic acid dispersant has good application prospects in deep and ultra-deep wells cementing.

Depth to bedrock using gravimetry in the Reno and Carson City, Nevada, area basins

Geophysics ◽  
2000 ◽  
Vol 65 (2) ◽  
pp. 340-350 ◽  
Author(s):  
Robert E. Abbott ◽  
John N. Louie
Keyword(s):  
Urban Areas ◽  
Sedimentary Basins ◽  
Maximum Depth ◽  
Oil Well ◽  
Gravity Fields ◽  
Gravity Measurements ◽  
Geothermal Wells ◽  
Data Coverage ◽  
Western Side ◽  
Well Data

Sedimentary basins can trap earthquake surface waves and amplify the magnitude and lengthen the duration of seismic shaking at the surface. Poor existing gravity and well‐data coverage of the basins below the rapidly growing Reno and Carson City urban areas of western Nevada prompted us to collect 200 new gravity measurements. By classifying all new and existing gravity locations as on seismic bedrock or in a basin, we separate the basins’ gravity signature from variable background bedrock gravity fields. We find an unexpected 1.2-km maximum depth trough below the western side of Reno; basin enhancement of the seismic shaking hazard would be greatest in this area. Depths throughout most of the rest of the Truckee Meadows basin below Reno are less than 0.5 km. The Eagle Valley basin below Carson City has a 0.53-km maximum depth. Basin depth estimates in Reno are consistent with depths to bedrock in the few available records of geothermal wells and in one wildcat oil well. Depths in Carson City are consistent with depths from existing seismic reflection soundings. The well and seismic correlations allow us to refine our assumed density contrasts. The basin to bedrock density contrast in Reno and Carson City may be as low as −0.33 g/cm3. The log of the oil well, on the deepest Reno subbasin, indicates that Quaternary deposits are not unusually thick there and suggests that the subbasin formed entirely before the middle Pliocene. Thickness of Quaternary fill, also of importance for determining seismic hazard below Reno and Carson City may only rarely exceed 200 m.

Sign in / Sign up

Export Citation Format

Share Document