scholarly journals Virtual MRTD – an indirect method to measure MRTD of thermal imagers using computer simulation

2020 ◽  
Vol 50 (4) ◽  
Author(s):  
Krzysztof Chrzanowski ◽  
Nguyen Hong Viet

Minimum resolvable temperature difference (MRTD) is considered as the most important parameter of thermal imagers. A new method of MRTD measurement without drawbacks of other methods is presented in this paper. Proposed MRTD measurement method coded as virtual MRTD is based on a three steps measurement concept using semi-automatic objective measurements and computer simulation. First, objective parameters of the tested thermal imager are measured. Second, software simulates this tested thermal imager and generates the image of 4-bar target of specified spatial frequency (size) and contrast (temperature difference). Third, a human observer analyses the images of the 4-bar target generated by the software on the screen of PC set and measures MRTD of the simulated thermal imager at specified set of spatial frequencies. The proposed method offers higher measurement speed, lower cost and typically better accuracy in comparison with the typical MRTD measurement method.

2005 ◽  
Vol 05 (01) ◽  
pp. 165-190 ◽  
Author(s):  
E. Y. K. NG ◽  
COLIN CHONG ◽  
G. J. L. KAW

Severe Acute Respiratory Syndrome (SARS) is a highly infectious disease caused by a coronavirus. Screening to detect potential SARS infected subject with elevated body temperature plays an important role in preventing the spread of SARS. The use of infrared (IR) thermal imaging cameras has thus been proposed as a non-invasive, speedy, cost-effective and fairly accurate means for mass blind screening of potential SARS infected persons. Infrared thermography provides a digital image showing temperature patterns. This has been previously utilized in the detection of inflammation and nerve dysfunctions. It is believed that IR cameras may potentially be used to detect subjects with fever, the cardinal symptom of SARS and avian influenza. The accuracy of the infrared system can, however, be affected by human, environmental, and equipment variables. It is also limited by the fact that the thermal imager measures the skin temperature and not the body core temperature. Thus, the use of IR thermal systems at various checkpoints for mass screening of febrile persons is scientifically unjustified such as what is the false negative rate and most importantly not to create false sense of security. This paper aims to study the effectiveness of infrared systems for its application in mass blind screening to detect subjects with elevated body temperature. For this application, it is critical for thermal imagers to be able to identify febrile from normal subjects accurately. Minimizing the number of false positive and false negative cases improves the efficiency of the screening stations. False negative results should be avoided at all costs, as letting a SARS infected person through the screening process may result in potentially catastrophic results. Hitherto, there is lack of empirical data in correlating facial skin with body temperature. The current work evaluates the correlations (and classification) between the facial skin temperatures to the aural temperature using the artificial neural network approach to confirm the suitability of the thermal imagers for human temperature screening. We show that the Train Back Propagation and Kohonen self-organizing map (SOM) can form an opinion about the type of network that is better to complement thermogram technology in fever diagnosis to drive a better parameters for reducing the size of the neural network classifier while maintaining good classification accuracy.


Complexity ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Muhammad Shafiq ◽  
Muhammad A. Shafiq ◽  
Hassan A. Yousef

In adaptive inverse control (AIC), adaptive inverse of the plant is used as a feed-forward controller. Majority of AIC schemes estimate controller parameters using the indirect method. Direct adaptive inverse control (DAIC) alleviates the adhocism in adaptive loop. In this paper, we discuss the stability and convergence of DAIC algorithm. The computer simulation results are presented to demonstrate the performance of the DAIC. Laboratory scale experimental results are included in the paper to study the efficiency of DAIC for physical plants.


2011 ◽  
Vol 130-134 ◽  
pp. 2470-2475
Author(s):  
Wei Dong Huang ◽  
Yin Mao Liu ◽  
Mei Rong Wu

Focusing on representation of quality characteristics variation in product process control, a measurement method based on medium logic was established. Representation model of quality detection index variation in process control was put forward, and fuzziness measurement of quality detection index was improved. Tack monitoring and maintenance of production line were researched by analyzing the variation of product quality index with disturbance. Furthermore, computer simulation was carried out by which influence of controllable variables on product quality with disturbance was analyzed and by which the efficiency of model built above was supported.


2014 ◽  
Vol 20 (1(86)) ◽  
pp. 23-27 ◽  
Author(s):  
V.G. Kolobrodov ◽  
◽  
N.I. Lykholit ◽  
V.M. Tiagur ◽  
◽  
...  

1991 ◽  
Author(s):  
Derek J. Bradley ◽  
Peter N. J. Dennis ◽  
Chris J. Baddiley ◽  
Kevin S. J. Murphy ◽  
Stephen R. Carpenter ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document