scholarly journals Nitrogen removal from ammonium-rich pharmaceutical wastewater: a comparison between sequencing batch reactor (SBR) and sequencing batch biofilm reactor (SBBR)

2018 ◽  
Vol 44 (3) ◽  
Author(s):  
Mehdi Hajsardar ◽  
Seyed Mehdi Borghei ◽  
Amir Hessam Hassani ◽  
Afshin Takdastan
Keyword(s):  
Nitrogen Removal ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Biofilm Reactor ◽  
Pharmaceutical Wastewater ◽  
Sequencing Batch Biofilm Reactor

Improving Wastewater Nitrogen Removal and Reducing Effluent NOx - -N by an Oxygen-Limited Process Consisting of a Sequencing Batch Reactor and a Sequencing Batch Biofilm Reactor

2019 ◽  
Vol 17 (7) ◽  
Author(s):  
Mehdi Hajsardar ◽  
Seyed Mehdi Borghei ◽  
Amir Hessam Hassani ◽  
Afshin Takdastan
Keyword(s):  
Carbon Source ◽  
Nitrogen Removal ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Nitrogen Loading ◽  
Biofilm Reactor ◽  
Synthetic Wastewater ◽  
The Novel ◽  
Sequencing Batch Biofilm Reactor ◽  
Do Concentration

Abstract A series of reactors including a sequencing batch reactor (SBR) and a sequencing batch biofilm reactor (SBBR) were used for nitrogen removal. The aim of this study was simultaneous removal of NH4+-N and NOx–-N from synthetic wastewater. In the novel proposed method, the effluent from SBR was sequentially introduced into SBBR, which contained 0.030 m3 biofilm carriers, so the system operated under a paired sequence of aerobic-anoxic conditions. The effects of different carbon sources and aeration conditions were investigated. A low dissolved oxygen (DO) level in the biofilm depth of the fixed-bed process (SBBR) simulated the anoxic phase conditions. Accordingly, a portion of NH4+-N that was not converted to NO3–-N by the SBR process was converted to NO3–-N in the outer layer of the biofilm in the SBBR process. Further, simultaneous nitrification and denitrification (SND) was achieved in the SBBR where NO2–-N was converted to N2 directly, before NO3–-N conversion (partial nitrification). The level of mixed liquid suspended solids (MLSS) was 2740 mg/l at the start of the experiments. The required carbon source (C: N ratio of 4) was provided by adding an internal carbon source (through step feeding) or ethanol. Firstly, as part of the system (SBR and SBBR), SBR operated at a DO level of 1 mg/l while SBBR operated at a DO concentration of 0.3 mg/l during Run-1. During Run-2, the system operated at the low DO concentration of 0.3 mg/l. When the source of carbon was ethanol, the nitrogen removal rate (RN) was higher than the operation with an internal carbon source. When the reactors were operated at the same DO concentration of 0.3 mg/l, 99.1 % of the ammonium was removed. The NO3–-N produced during the aerobic SBR operation of the novel method was removed in SBBR reactor by 8.3 %. The concentrations of NO3--N and NO2–-N in the SBBR effluent were reduced to 2.5 and 5.5 mg/l, respectively. Also, the total nitrogen (TN) removal efficiency was 97.5 % by adding ethanol at the DO level of 0.3 mg/l. When C:N adjustment was carried out SND efficiency at C:N ratio of 6.5 reached to 99 %. The increasing nitrogen loading rate (NLR) to 0.554 kg N/m3 d decreased SND efficiency to 80.7 %.

Biological phosphorus and nitrogen removal in a sequencing batch moving bed biofilm reactor

2001 ◽  
Vol 43 (1) ◽  
pp. 233-240 ◽  
Author(s):  
H. Helness ◽  
H. Ødegaard
Keyword(s):  
Nitrogen Removal ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Phosphorus Uptake ◽  
Complete Removal ◽  
Biofilm Reactor ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed ◽  
Activated Sludge Processes ◽  
Biological Phosphorus

Biological phosphorus and nitrogen removal in biofilm processes have a potential advantage compared to activated sludge processes, because of less vulnerability with respect to sludge loss and because biofilm processes, in general, are more compact with a smaller footprint. Experiments have been carried out in a moving bed biofilm reactor operated as a sequencing batch reactor (SBR), with simultaneous nitrification, phosphorus uptake and denitrification in the aerobic phase. In order to achieve good phosphorus and nitrogen removal, the length of the anaerobic period should be tuned to achieve near complete removal of easily biodegradable COD in the anaerobic period, and the length of the aerobic period should be long enough for complete nitrification. The total COD-loading rate must be at the same time be kept high enough to achieve a net growth of biomass in the reactor.

Excess nitrogen accumulation in activated sludge in sequencing batch reactor with a single-stage oxic process

2009 ◽  
Vol 59 (3) ◽  
pp. 573-582 ◽  
Author(s):  
Xiao-ming Li ◽  
Dong-bo Wang ◽  
Qi Yang ◽  
Wei Zheng ◽  
Jian-bin Cao ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Sequencing Batch Reactor ◽  
Ph Value ◽  
Batch Reactor ◽  
Nitrogen Loss ◽  
Single Stage ◽  
Synthetic Wastewater ◽  
Nitrogen Accumulation ◽  
Excess Nitrogen

It was occasionally found that a significant nitrogen loss in solution under neutral pH value in a sequencing batch reactor with a single-stage oxic process using synthetic wastewater, and then further studies were to verify the phenomenon of nitrogen loss and to investigate the pathway of nitrogen removal. The result showed that good performance of nitrogen removal was obtained in system. 0–7.28 mg L−1 ammonia, 0.08–0.38 mg L−1 nitrite and 0.94–2.12 mg L−1 nitrate were determined in effluent, respectively, when 29.85–35.65 mg L−1 ammonia was feeding as the sole nitrogen source in influent. Furthermore, a substantial nitrogen loss in solution (95% of nitrogen influent) coupled with a little gaseous nitrogen increase in off-gas (7% of nitrogen influent) was determined during a typical aerobic phase. In addition, about 322 mg nitrogen accumulation (84% of nitrogen influent) was detected in activated sludge. Based on nitrogen mass balance calculation, the unaccounted nitrogen fraction and the ratio of nitrogen accumulation in sludge/nitrogen loss in solution were 14.6 mg (3.7% of nitrogen influent) and 0.89, respectively. The facts indicated that the essential pathway of nitrogen loss in solution in this study was excess nitrogen accumulation in activated sludge.

Nitrogen removal from livestock and poultry breeding wastewaters using a novel sequencing batch biofilm reactor

2010 ◽  
Vol 62 (11) ◽  
pp. 2599-2606 ◽  
Author(s):  
Hong Xiao ◽  
Ping Yang ◽  
Hong Peng ◽  
Yanzong Zhang ◽  
Shihuai Deng ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Heterotrophic Bacteria ◽  
Biofilm Reactor ◽  
N Accumulation ◽  
Sequencing Batch Biofilm Reactor ◽  
Poultry Breeding ◽  
Mode 2 ◽  
Do Concentration ◽  
Nitrification And Denitrification ◽  
Biological Nitrogen

A study was conducted regarding the biological nitrogen removal from the livestock and poultry breeding wastewater (LPBWs) using a novel sequencing batch biofilm reactor (SBBR). Nitrogen removal process was studied under three aeration strategies/modes, referred to as MODE 1, 2, and 3. The results showed that MODE 2 (one operation period: instant fill of LPBWs, 3.0 h aeration, 1.5 h non-aeration, 1.5 h aeration, 1.0 h non-aeration and rapid drain of treated LPBWs) performed the best in nitrogen removal. Under MODE 2, the removal efficiencies were as high as 96.1 and 92.1% for NH3-N and TN, respectively. Simultaneous nitrification and denitrification (SND), as well as shortcut nitrification and denitrification are likely to be the two main mechanisms for the nitrogen removal in this study. Nitrifying bateria were not inhibited by heterotrophic bacteria with C/N ratios ranging from 18.1 to 21.4 and DO concentration of 2.0 mg/l. Alternation between aeration and non-aeration played an important role in NO2−-N accumulation.

Sign in / Sign up

Export Citation Format

Share Document