scholarly journals Assessment of threat arising by closed - volume explosions of fuel - air mixtures

2021 ◽  
pp. 1-11
Author(s):  
Andrzej PAPLIŃSKI
Keyword(s):  
Combustion Products ◽  
Numerical Code ◽  
Closed Volume ◽  
Closed Space ◽  
Empirical Methods ◽  
Flammability Limits ◽  
Reactive Medium ◽  
Gaseous Mixtures ◽  
Semi Empirical ◽  
Composition Of Combustion Products

The method of estimation of maximal parameters of combustion of gaseous mixtures in closed space is presented. Estimation of chemical composition of combustion products is based on simplified rules of decomposition of reactive medium. Exemplary calculations of temperature, pressure, heat of combustion of hydrocarbon/air mixtures are presented. The accuracy of presented method was validated by comparison with calculations performed by thermodynamic numerical code that include wide list of chemical substances present in combustion products. The obtained results confirm applicability of the proposed method to predict closed space combustion parameters of gaseous mixtures. Semi-empirical methods of estimation of flammability limits are briefly referred

On a composition of combustion products at a burning of methane-fluorinated hydrocarbon mixtures in air

2020 ◽  
pp. 44-49
Author(s):  
Алексей Юрьевич Шебеко ◽  
Юрий Николаевич Шебеко
Keyword(s):  
Combustion Products ◽  
Hydrocarbon Mixtures ◽  
Gaseous Mixtures ◽  
Fire Extinguishing ◽  
Simplified Method ◽  
Room Volume ◽  
Composition Of Combustion Products ◽  
Fluorinated Hydrocarbons

Выполнена расчетная оценка равновесного состава продуктов горения околостехиометрических смесей вида метан - фторированный углеводород - воздух с использованием как программного комплекса Chemical Workbench, так и предложенной в настоящей работе упрощенной методики. Найдено, что основными продуктами горения являются CO, HO, CO, HF. При этом концентрации прочих продуктов горения имеют существенно более низкие значения. С помощью программного комплекса FDS выполнен расчет динамики концентраций опасных продуктов (СО, HF) в атмосфере модельного помещения объемом 12,6 м. Найдено, что для указанного помещения предельно допустимая концентрация CO достигается через 730 с после начала горения, а HF - практически мгновенно. Результаты работы могут быть полезны при применении фторированных углеводородов для пожаротушения и флегматизации горючих газовых смесей. Calculations of equilibrium compositions of combustion products at burning of near stoichiometric mixtures of methane-fluorinated hydrocarbon-air are presented. The program tool Chemical Workbench was used. Also a Simplified method was proposed. It was found that CO, HO, CO and HF are the main combustion products, and the concentration of other products are much more lower. The results of the calculations of the concentrations of the above mentioned products (CO, HO, CO and HF) by means of the simplified method are close to that obtained by the tool Chemical Workbench ones. The concentrations of CO and HF (the main hazardous products) as a function of time were determined for a typical room volume of 12, 6 m using the program tool FDS 6. It was found that a limiting allowable concentration of CO was reached after 730 s from the burning beginning, but at the case of HF this concentration was reached almost instantaneously. The results of this study can be used at an application of the fluorinated hydrocarbons for fire extinguishing and inertization of flammable gaseous mixtures.

Semi-empirical methods versus dynamic load testing in piles

Geotecnia ◽  
2015 ◽  
Vol 135 ◽  
pp. 89-113
Author(s):  
Jean Felix Cabette ◽  
◽  
<br>Heloisa Helena Silva Gonçalves ◽  
<br>Fernando Antônio Marinho ◽  
◽  
...  
Keyword(s):  
Dynamic Load ◽  
Load Testing ◽  
Empirical Methods ◽  
Semi Empirical

Excited-state localization and energy transfer in pyrene core dendrimers with fluorene/carbazole as the dendrons and acetylene as the linkages

2016 ◽  
Vol 18 (5) ◽  
pp. 4134-4143 ◽  
Author(s):  
Linyin Yan ◽  
Yan Wan ◽  
Andong Xia ◽  
Sheng Hien Lin ◽  
Ran Huang
Keyword(s):  
Energy Transfer ◽  
Excited State ◽  
Theoretical Model ◽  
Empirical Methods ◽  
Multi Scale ◽  
Td Dft ◽  
Semi Empirical

Multi-scale theoretical model and spectra simulation for dendrimers combining TD-DFT/DFT and semi-empirical methods.

scholarly journals VERIFICAÇÃO DO DESEMPENHO DAS ESTACAS INJETADAS AUTOPERFURANTES EXECUTADAS EM SOLOS ARENOSOS PARA CONSTRUÇÃO DE USINA EÓLICA

2017 ◽  
Vol 13 (2) ◽  
Author(s):  
Rodrigo Cerqueira Rogerio
Keyword(s):  
Structural Characteristics ◽  
Load Capacity ◽  
The Self ◽  
Executive Processes ◽  
Empirical Methods ◽  
Deep Drilling ◽  
Load Tests ◽  
Different Diameters ◽  
Semi Empirical

RESUMO: Apresenta-se neste trabalho a solução adotada para execução das fundações do Parque de Usina Eólica localizado no Ceará, com a utilização das estacas injetadas autoperfurantes, executadas em presença de solos arenosos. No qual consiste em perfurar o solo com altíssima velocidade por rotação e “pull down”, através da injeção simultânea de nata de cimento com medias pressões. Ocasionando na estaca um diâmetro final que pode obter o dobro do bit de perfuração, de acordo com o tipo de solo, gerado pelo efeito do jato da nata de cimento. Detalhando os processos executivos, verificando os aspectos técnicos e operacionais, para melhor compreender as características estruturais deste elemento. De forma a verificar “in situ” o desempenho deste novo tipo de fundação profunda, foram realizadas provas de carga, em estacas com diferentes diâmetros e comprimentos, realizadas em perfis estratigráficos de solos arenosos, para melhor avaliação de sua capacidade de carga. Analisando-se os ensaios das provas de carga interpretados a base da extrapolação da curva carga versus recalque e das previsões da capacidade de carga, obtidas por meio dos métodos semi-empíricos de correlação com ensaios de penetração (SPT), avaliando os padrões de execução desta tipologia de estaca injetada para comunidade geotécnica. ABSTRACT: This paper aims to establish the selected solution to except the foundations of the Wind Energy Park in Ceará (Brazil), with an executive methodology of the self-drilling injection piles framed in loco in Sandy soil. In which the soil drilling is done with the highest speed by rotation and pull down, through the simultaneous injection of grouting with medium pressures. This kind of drilling causes in the pile a final diameter that can get the double bore bit, according to the type of soil, done by the grouting blast. The executive processes are detailed as a whole, and also presenting the pile materials composition, in order to understand the structural characteristics of this element. To verify the performance of this new kind of deep drilling, instrumentations were done: settlement control and load tests in constructions with different structural characteristics, in self-drilling injected piles with different diameters and length, done in stratigraphical sandy, for a better evaluation of its load capacity. Analyzing the essays of load tests interpreted in the basis of curve extrapolation load versus settlement and the previsions of the load capacity, obtained by semi-empirical methods correlating with the penetrations methods (SPT), offering information to the geotechnical community.

scholarly journals STRUCTURAL AND ELECTRONIC PROPERTIES OF BRIDGED BITHIOPHENE S-OXIDES (BTO) WITH S, S=O, O, SiH2 and BH2 BRIDGE: SEMI-EMPIRICAL AND AB INITIO STUDY

2010 ◽  
Vol 18 (18) ◽  
pp. 1-10
Author(s):  
Banjo Semire ◽  
Isaiah Ajibade Adejoro ◽  
Olusegun Ayobami Odunola
Keyword(s):  
Density Functional Theory ◽  
Thermodynamic Properties ◽  
Ab Initio ◽  
Density Functional ◽  
Ab Initio Study ◽  
Empirical Methods ◽  
Functional Theory ◽  
Structural And Electronic Properties ◽  
Semi Empirical ◽  
Good Agreement

In this paper, we theoretically studied the geometries, stabilities, electronic and thermodynamic properties of bridged bithiophene S-oxide (BTO-X) derivates (with X = BH2, SiH2, S, S=O, and O) by using semi-empirical methods, ab-initio, and Density functional theory. The geometries and thermodynamic parameters calculated by PM3 were in good agreement with that of B3LYP/6-31G(d). The bandgap calculated by B3LYP/6-31G(d) ranged from 3.94eV (BTO-O)-3.16eV (BTO-BH2). The absorption λmax calculated suing B3LYP/6-31G(d) shifted to longer wavelength with X=BH2, SiH2, and S=O due to enhancement of π-conjugated system whereas, BTO-S and BTO-O shifted to shorter wavelengths as compared to dimmer thiophene S-oxide (2TO).

scholarly journals Experimental and Computational Vibration Study of Amino Acids

2013 ◽  
Vol 15 ◽  
pp. 1-17 ◽  
Author(s):  
Musa E. Mohamed ◽  
Abdelhafeez M.A. Mohammed
Keyword(s):  
Amino Acids ◽  
Glutamic Acid ◽  
Ab Initio ◽  
Vibrational Frequencies ◽  
Empirical Methods ◽  
Vibrational Studies ◽  
Semi Empirical

Vibrational studies of amino acids experimentally and theoretically have been performed. The Semi-empirical methods optimization by PM6 and RM1 on the l- and d-amino acids (alanine, phenylalanine, aspartic and glutamic acid), showed no difference in energy between l-and d-isomers. The vibrational frequencies were calculated by semi-emprical methods (PM6 and RM1) and Ab Initio methods (B3LYP/6-31+G(d) and were scaled down by factors of 0.925 (RM1), 1.09 (PM6) and 0.89 (B3LYP/6-31+G(d)). The calculated and experimental vibrational frequencies have shown good general agreement.

Ship Roll Motion Damping Using Bilge Keels – A Detailed CFD Investigation

2015 ◽  
Author(s):  
Joshua Counsil ◽  
Kevin McTaggart ◽  
Dominic Groulx ◽  
Kiari Boulama
Keyword(s):  
Experimental Studies ◽  
The Body ◽  
Navier Stokes ◽  
Roll Motion ◽  
Empirical Methods ◽  
Viscous Effects ◽  
Vortex Interactions ◽  
Ship Roll ◽  
Semi Empirical ◽  
Bilge Keel

A study has been undertaken to test the value of unsteady Reynolds-averaged Navier-Stokes (URANS) and traditional semi-empirical methods in the face of complex ship roll phenomena, and provide insight into the selection of bilge keel span for varying roll amplitudes. The computational fluid dynamics (CFD) code STAR-CCM+ is employed and two-dimensional submerged bodies undergoing forced roll motion are analyzed. The spatial resolution and timestepping scheme are validated by comparison with published numerical and experimental studies. The model is then applied to a fully-submerged circular cylinder with bilge keels of varying span and undergoing roll motion at varying angular amplitudes. Extracted hydrodynamic coefficients indicate that in general, increasing displacement amplitude and bilge keel span yields increased added mass and increased damping. The relationship is complex and highly dependent upon vortex interactions with each other and the body. The semi-empirical methods used for comparison yield good predictions for simple vortex interactions but fail where viscous effects are strong. Hence, URANS methods are shown to be necessary for friction-dominated flows while semi-empirical methods remain useful for initial design considerations.

Sign in / Sign up

Export Citation Format

Share Document