scholarly journals Thermal 3D model for non-homogeneous elements in mobile devices

2019 ◽  
Vol 29 (8) ◽  
pp. 130-133
Author(s):  
V. I. Havrysh ◽  
O. S. Korol ◽  
R. R. Shkrab ◽  
B. O. Kviatkovskyi
Keyword(s):  
Thermal Conductivity ◽  
Fourier Transform ◽  
Heat Exchange ◽  
Analytical Solution ◽  
Generalized Derivatives ◽  
Inhomogeneous Layer ◽  
Conductivity Equation ◽  
Integral Fourier Transform ◽  
Thermal Conductivity Equation ◽  
Boundary Surfaces

A mathematical model for the analysis of heat exchange between the environment and an isotropic space layer with an alien inclusions is developed, which is heated by a heat flux centered on one of the boundary surfaces. For this purpose, using the theory of generalized functions, the coefficient of thermal conductivity of this structure is depicted as one unit for the whole system. In view of this, instead of two equations of thermal conductivity for the layer and the inclusion and conditions of perfect thermal contact on the surfaces of the junction between them, one equation of thermal conductivity was obtained in the generalized derivatives with breaking coefficients. We consider the case when the inclusion sizes are small compared to the distances from the inclusion surfaces to the boundary surfaces of the layer. In this connection, the combined thermophysical parameters were introduced and the thermal coefficients of the thermal conductivity equation were transformed into singular ones. For the solution of the boundary value problem of thermal conductivity containing this equation and boundary conditions on the boundary surfaces of the layer, an integral Fourier transform was used and, as a result, an analytical solution of the problem in the images was obtained. The inverse integral Fourier transform was applied to this solution, which made it possible to obtain the final analytical solution of the original problem. The analytical solution obtained is presented as a non-native double convergent integral. To determine the numerical values ​​of the temperature in the above design, as well as to analyze the heat exchange between the layer and the environment caused by different temperature regimes due to the heating of the inhomogeneous layer by a heat source concentrated in the area of ​​inclusion, computational programs have been developed. Using these programs, graphs are displayed showing the behavior of curves constructed using numerical values ​​of the temperature distribution depending on the spatial coordinates for different inclusion materials. The obtained numerical values ​​of temperature indicate a significant influence of the inclusion on its distribution in the design "layer-inclusion". The software also makes it possible to analyze these inhomogeneous media with respect to their heat resistance during heating. As a consequence, it becomes possible to raise and protect it from overheating, which can cause destruction not only of individual elements, but also of the whole structure.

Mathematical Model of Determination and Analysis of Heat Exchange in Elements of Digital Technology Devices

2021 ◽  
Vol 43 (4) ◽  
pp. 37-50
Author(s):  
V.I. Havrysh ◽  
Keyword(s):  
Thermal Conductivity ◽  
Mathematical Model ◽  
Fourier Transform ◽  
Heat Exchange ◽  
Analytical Solution ◽  
Heat Source ◽  
Point Heat Source ◽  
Integral Fourier Transform ◽  
Spatial Coordinates ◽  
Boundary Surfaces

A mathematical model of heat exchange analysis between an isotropic two-layer plate heated by a point heat source concentrated on the conjugation surfaces of layers and the environment has been developed. To do this, using the theory of generalized functions, the coefficient of thermal conductivity of the materials of the plate layers is shown as a whole for the whole system. Given this, instead of two equations of thermal conductivity for each of the plate layers and the conditions of ideal thermal contact, one equation of thermal conductivity in generalized derivatives with singular coefficients is obtained between them. To solve the boundary value problem of thermal conductivity containing this equation and boundary conditions on the boundary surfaces of the plate, the integral Fourier transform was used and as a result an analytical solution of the problem in images was obtained. An inverse integral Fourier transform was applied to this solution, which made it possible to obtain the final analytical solution of the original problem. The obtained analytical solution is presented in the form of an improper convergent integral. According to Simpson's method, numerical values of this integral are obtained with a certain accuracy for given values of layer thickness, spatial coordinates, specific power of a point heat source, thermal conductivity of structural materials of the plate and heat transfer coefficient from the boundary surfaces of the plate. The material of the first layer of the plate is copper, and the second is aluminum. Computational programs have been developed to determine the numerical values of temperature in the given structure, as well as to analyze the heat exchange between the plate and the environment due to different temperature regimes due to heating the plate by a point heat source concentrated on the conjugation surfaces. Using these programs, graphs are shown that show the behavior of curves constructed using numerical values of the temperature distribution depending on the spatial coordinates. The obtained numerical values of temperature indicate the correspondence of the developed mathematical model of heat exchange analysis between a two-layer plate with a point heat source focused on the conjugation surfaces of the layersand the environment, the real physical process.

scholarly journals MATHEMATICAL MODEL OF HEAT EXCHANGE IN ELEMENTS OF DIGITAL DEVICES

2021 ◽  
Vol 3 (1) ◽  
pp. 15-21
Author(s):  
Havrysh Havrysh ◽  
◽  
W. Yu. W. Yu. ◽  
Keyword(s):  
Thermal Conductivity ◽  
Mathematical Model ◽  
Fourier Transform ◽  
Heat Exchange ◽  
Analytical Solution ◽  
Heat Source ◽  
Point Heat Source ◽  
Integral Fourier Transform ◽  
Spatial Coordinates ◽  
Boundary Surfaces

A mathematical model of heat exchange analysis between an isotropic two-layer plate heated ba point heat source concentrated on the conjugation surfaces of layers and the environment has been developed. To do this, using the theory of generalized functions, the coefficient of thermal conductivity of the materials of the plate layers is shown as a whole for the wholesystem.Given this, instead of two equations of thermal conductivity for each of the plate layers and the conditions of ideal thermal contact, one equation of thermal conductivity ingeneralized derivatives with singular coefficients is obtained between them. To solve the boundary value problem of thermal conductivity containing this equation and boundary conditions on the boundary surfaces of the plate, the integral Fourier transform was used and as a result an analytical solution of the problem in images was obtained. An inverse integral Fourier transform was applied to this solution, which made it possible to obtain the final analytical solution of the original problem. The obtained analytical solution is presented in the form of an improper convergent integral. According to Simpsons method, numerical values of this integral are obtained with a certain accuracy for given values of layer thickness, spatial coordinates, specific power of a point heat source, thermal conductivity of structural materials of the plate and heat transfer coefficient from the boundary surfaces of the plate. The material of the first layer of the plate is copper, and the second is aluminum. Computational programs have been developed to determine the numerical values of temperature in the given structure, as well as to analyze the heat exchange between the plate and the environment due to different temperature regimes due to heating the plate by a point heat source concentrated on the conjugation surfaces. Using these programs, graphs are shown that show the behavior of curves constructed using numerical values of the temperature distribution depending on the spatial coordinates. The obtained numerical values of temperature indicate the correspondence of the developed mathematical model of heat exchange analysis between a two-layer plate with a point heatsource focused on the conjugation surfaces of the layersand the environment, the real physical process.

scholarly journals SIMULATION OF HEAT EXCHANGE IN A MULTILAYER FLAT STRUCTURE UNDER PERFECT THERMAL CONTACT IN FIRE CONDITIONS

Fire Safety ◽  
2020 ◽  
Vol 36 ◽  
pp. 115-120
Author(s):  
R. Tatsii ◽  
M. Stasiuk ◽  
O. Pazen
Keyword(s):  
Thermal Conductivity ◽  
Heat Exchange ◽  
Thermal Contact ◽  
Internal Heat ◽  
Nonstationary Temperature ◽  
Heat Sources ◽  
Conductivity Equation ◽  
Flat Structure ◽  
Temperature Changes ◽  
Internal Heat Sources

The proposed work is devoted to the application of the direct method to the study of heat transfer processes in a multilayer flat structure. It is assumed that each layer is made of isotropic material of different thickness. There is an imperfect thermal contact between them, and the layers have internal heat sources. In this case, the isothermal surfaces are parallel planes, i.e the temperature changes in only one direction. On the outer surfaces of the structure there is a convective heat exchange with the environment, i.e the boundary conditions of the third kind are fulfilled. The coefficients of the thermal conductivity equation are considered to be piecewise constant with respect to the spatial coordinate. This is the first time the problem has been solved in this setting. The solution of the problem is realized by applying the method of reduction using the concept of quasi-derivatives and applying the theory of systems of differential equations with impulse action. The following is the procedure for separating Fourier variables using a modified method of eigenfunctions.Based on the physical content of the problem, the differential equation of thermal conductivity was written in the Cartesian coordinate system, but the solution scheme presented here without any fundamental difficulties extends to similar problems for multilayer bodies of basic geometric shapes by switching to appropriate coordinate systems. To illustrate the proposed method, a model example of finding the distribution of a nonstationary temperature field in a seven-layer flat structure under the influence of the hydrocarbon temperature of the fire is solved. The condition of ideal or non-ideal thermal contact is fulfilled between two adjacent layers. In addition, some layers have internal heat sources. The results of the calculations are presented in the form of a graph of temperature changes depending on timeand spatial coordinates.

Determination of nonstationary thermal field of passenger car wheel at braking

2020 ◽  
pp. 40-44
Author(s):  
Alexander Vyacheslavovich Zyablov ◽  
◽  
Sergey Valeryevich Bespalko ◽  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Field ◽  
Thermal Emission ◽  
Euler Method ◽  
Rolling Stock ◽  
Conductivity Equation ◽  
Passenger Car ◽  
Thermal Conductivity Equation ◽  
Nonstationary Field ◽  
Curved Rod

The paper is devoted to modeling of nonstationary field of a passenger car wheel at braking. The calculation is based on formulation of thermal conductivity equation for the wheel tread as a curved rod with the application of linear approximation of thermal field. At formulation of thermal conductivity equation it is necessary to consider a balance of heat in small volume of tread with the consideration for thermal flow from braking shoe, thermal emission to the environment and thermal conductivity in circular direction. The authors have set for the initial equation of thermal conductivity a functional and have formulated conditions of stationarity that leads after integration to the system of the first order differential equations of time. The authors have applied the Euler method at integration. The developed method has been realized in the C++ program. With the use of this application the authors have conducted a research of the thermal field of the passenger car wheel. The method can be used at designing of new rolling stock and for the analysis of reasons of flaws appearance on the surface of car wheels.

Sign in / Sign up

Export Citation Format

Share Document