scholarly journals Effect of uniform and non-uniform mesh on the development of turbulent boundary layer

2021 ◽  
Author(s):  
Lokesh Kalyan Gutti ◽  
◽  
Bhupendra Singh Chauhan ◽  
Hee-Chang Lim ◽  
◽  
...  
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Stokes Equations ◽  
Flow Simulation ◽  
Navier Stokes ◽  
Uniform Mesh ◽  
Navier Stokes Equations ◽  
Eddy Simulation ◽  
Grid Points ◽  
Long Channel

For incompressible flow simulation, it is commonly accepted to use uniform meshes to solve the governing equation of turbulent boundary layer. It follows the laws of conservation stabilizing the flow field in the domain and preventing odd-even decoupling in the pressure field. In this study, Large Eddy Simulation (LES) has been conducted in a long channel. In order to calculate the turbulent boundary layer in the channel, the unsteady Navier-Stokes equations has been adopted at a Reynolds number =180, which is based on mean centerline velocity and the half-width of the channel. The mesh used in this study was based on both stretch and uniform mesh having grid points, which is corresponding to . Turbulence statistics were also calculated to compare to the existing results. In the results, the turbu lent boundary layer was fully developed at around . In addition, fully developed channel flow was achieved at the non-dimensional time of .

scholarly journals A Modified Gas-Kinetic Scheme for Turbulent Flow

2014 ◽  
Vol 16 (1) ◽  
pp. 239-263 ◽  
Author(s):  
Marcello Righi
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Kinetic Energy ◽  
Turbulent Boundary Layer ◽  
Numerical Scheme ◽  
Stokes Equations ◽  
Kinetic Scheme ◽  
Navier Stokes ◽  
Turbulent Stress ◽  
Navier Stokes Equations

AbstractThe implementation of a turbulent gas-kinetic scheme into a finite-volume RANS solver is put forward, with two turbulent quantities, kinetic energy and dissipation, supplied by an allied turbulence model. This paper shows a number of numerical simulations of flow cases including an interaction between a shock wave and a turbulent boundary layer, where the shock-turbulent boundary layer is captured in a much more convincing way than it normally is by conventional schemes based on the Navier-Stokes equations. In the gas-kinetic scheme, the modeling of turbulence is part of the numerical scheme, which adjusts as a function of the ratio of resolved to unresolved scales of motion. In so doing, the turbulent stress tensor is not constrained into a linear relation with the strain rate. Instead it is modeled on the basis of the analogy between particles and eddies, without any assumptions on the type of turbulence or flow class. Conventional schemes lack multiscale mechanisms: the ratio of unresolved to resolved scales – very much like a degree of rarefaction – is not taken into account even if it may grow to non-negligible values in flow regions such as shocklayers. It is precisely in these flow regions, that the turbulent gas-kinetic scheme seems to provide more accurate predictions than conventional schemes.

Zero-Pressure-Gradient Turbulent Boundary Layer

1997 ◽  
Vol 50 (12) ◽  
pp. 689-729 ◽  
Author(s):  
William K. George ◽  
Luciano Castillo
Keyword(s):  
Experimental Data ◽  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Governing Equations ◽  
Dynamical Equations ◽  
Navier Stokes Equations ◽  
Theoretical Concepts

Of the many aspects of the long-studied field of turbulence, the zero-pressure-gradient boundary layer is probably the most investigated, and perhaps also the most reviewed. Turbulence is a fluid-dynamical phenomenon for which the dynamical equations are generally believed to be the Navier-Stokes equations, at least for a single-phase, Newtonian fluid. Despite this fact, these governing equations have been used in only the most cursory manner in the development of theories for the boundary layer, or in the validation of experimental data-bases. This article uses the Reynolds-averaged Navier-Stokes equations as the primary tool for evaluating theories and experiments for the zero-pressure-gradient turbulent boundary layer. Both classical and new theoretical ideas are reviewed, and most are found wanting. The experimental data as well is shown to have been contaminated by too much effort to confirm the classical theory and too little regard for the governing equations. Theoretical concepts and experiments are identified, however, which are consistent-both with each other and with the governing equations. This article has 77 references.

Numerical Integration of the Navier-Stokes Equations for a Disk Rotating in a Housing

1985 ◽  
Vol 40 (8) ◽  
pp. 789-799 ◽  
Author(s):  
A. F. Borghesani
Keyword(s):  
Boundary Layer ◽  
Cylindrical Cavity ◽  
Boundary Layer Thickness ◽  
Stokes Equations ◽  
Fluid Motion ◽  
Rotating Disk ◽  
Infinite Medium ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Viscous Torque

The Navier-Stokes equations for the fluid motion induced by a disk rotating inside a cylindrical cavity have been integrated for several values of the boundary layer thickness d. The equivalence of such a device to a rotating disk immersed in an infinite medium has been shown in the limit as d → 0. From that solution and taking into account edge effect corrections an equation for the viscous torque acting on the disk has been derived, which depends only on d. Moreover, these results justify the use of a rotating disk to perform accurate viscosity measurements.

Direct simulation of transition in an oscillatory boundary layer

1998 ◽  
Vol 371 ◽  
pp. 207-232 ◽  
Author(s):  
G. VITTORI ◽  
R. VERZICCO
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Turbulent Regime ◽  
Two Dimensional ◽  
Temporal Development ◽  
Direct Simulation ◽  
Navier Stokes Equations ◽  
Oscillatory Boundary Layer

Numerical simulations of Navier–Stokes equations are performed to study the flow originated by an oscillating pressure gradient close to a wall characterized by small imperfections. The scenario of transition from the laminar to the turbulent regime is investigated and the results are interpreted in the light of existing analytical theories. The ‘disturbed-laminar’ and the ‘intermittently turbulent’ regimes detected experimentally are reproduced by the present simulations. Moreover it is found that imperfections of the wall are of fundamental importance in causing the growth of two-dimensional disturbances which in turn trigger turbulence in the Stokes boundary layer. Finally, in the intermittently turbulent regime, a description is given of the temporal development of turbulence characteristics.

Detached-Eddy Simulations Over a Simplified Landing Gear

2002 ◽  
Vol 124 (2) ◽  
pp. 413-423 ◽  
Author(s):  
L. S. Hedges ◽  
A. K. Travin ◽  
P. R. Spalart
Keyword(s):  
Stokes Equations ◽  
Separated Flow ◽  
Flow Fields ◽  
Equation Model ◽  
Landing Gear ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Navier Stokes Equations ◽  
Instantaneous Flow ◽  
Eddy Simulation

The flow around a generic airliner landing-gear truck is calculated using the methods of Detached-Eddy Simulation, and of Unsteady Reynolds-Averaged Navier-Stokes Equations, with the Spalart-Allmaras one-equation model. The two simulations have identical numerics, using a multi-block structured grid with about 2.5 million points. The Reynolds number is 6×105. Comparison to the experiment of Lazos shows that the simulations predict the pressure on the wheels accurately for such a massively separated flow with strong interference. DES performs somewhat better than URANS. Drag and lift are not predicted as well. The time-averaged and instantaneous flow fields are studied, particularly to determine their suitability for the physics-based prediction of noise. The two time-averaged flow fields are similar, though the DES shows more turbulence intensity overall. The instantaneous flow fields are very dissimilar. DES develops a much wider range of unsteady scales of motion and appears promising for noise prediction, up to some frequency limit.

Self-Excited Oscillation of Transonic Flow Around an Airfoil in Two-Dimensional Channel

1989 ◽  
Author(s):  
Kazuomi Yamamoto ◽  
Yoshimichi Tanida
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Transonic Flow ◽  
Stokes Equations ◽  
Flow Region ◽  
Boundary Layer Separation ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Layer Separation ◽  
Excited Oscillation

A self-excited oscillation of transonic flow in a simplified cascade model was investigated experimentally, theoretically and numerically. The measurements of the shock wave and wake motions, and unsteady static pressure field predict a closed loop mechanism, in which the pressure disturbance, that is generated by the oscillation of boundary layer separation, propagates upstream in the main flow and forces the shock wave to oscillate, and then the shock oscillation disturbs the boundary layer separation again. A one-dimensional analysis confirms that the self-excited oscillation occurs in the proposed mechanism. Finally, a numerical simulation of the Navier-Stokes equations reveals the unsteady flow structure of the reversed flow region around the trailing edge, which induces the large flow separation to bring about the anti-phase oscillation.

Free-stream coherent structures in parallel boundary-layer flows

2014 ◽  
Vol 752 ◽  
pp. 602-625 ◽  
Author(s):  
Kengo Deguchi ◽  
Philip Hall
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Coherent Structures ◽  
Free Stream ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Homotopy Continuation ◽  
Boundary Layer Flows ◽  
Navier Stokes Equations ◽  
High Reynolds

AbstractOur concern in this paper is with high-Reynolds-number nonlinear equilibrium solutions of the Navier–Stokes equations for boundary-layer flows. Here we consider the asymptotic suction boundary layer (ASBL) which we take as a prototype parallel boundary layer. Solutions of the equations of motion are obtained using a homotopy continuation from two known types of solutions for plane Couette flow. At high Reynolds numbers, it is shown that the first type of solution takes the form of a vortex–wave interaction (VWI) state, see Hall & Smith (J. Fluid Mech., vol. 227, 1991, pp. 641–666), and is located in the main part of the boundary layer. On the other hand, here the second type is found to support an equilibrium solution of the unit-Reynolds-number Navier–Stokes equations in a layer located a distance of $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}O(\ln \mathit{Re})$ from the wall. Here $\mathit{Re}$ is the Reynolds number based on the free-stream speed and the unperturbed boundary-layer thickness. The streaky field produced by the interaction grows exponentially below the layer and takes its maximum size within the unperturbed boundary layer. The results suggest the possibility of two distinct types of streaky coherent structures existing, possibly simultaneously, in disturbed boundary layers.

Sign in / Sign up

Export Citation Format

Share Document