scholarly journals Assessment of chemical exposures on ECC containing stone slurry powder

2021 ◽  
Author(s):  
Maninder Singh ◽  
◽  
Babita Saini ◽  
Chalak H.D. ◽  
◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Fine Sand ◽  
Silica Sand ◽  
Hydraulic Structures ◽  
Tensile Behaviour ◽  
Cementitious Composite ◽  
Chemical Exposures ◽  
Engineered Cementitious Composite ◽  
Micro Silica ◽  
Durability Performance

Generation of solid waste materials from various industrial sources is becoming a challenging issue for safe disposal. Durability performance of hydraulic structures under environmental loadings (aggressive substances) is also a concerning issue. The present paper investigated the durability performance of engineered cementitious composite (ECC) mortar containing stone slurry powder (SSP). SSP was used as partial subrogation of micro silica sand (MSS) and fine sand (FS) by 25% and 50% for each type of sand. Electrical resistivity (ER), compressive and tensile behaviour of various mixes were studied experimentally under chloride, sulphate and chloride-sulphate combined environmental conditions. Results obtained from various properties revealed that performance of fully MSS and FS containing ECC mixes was affected under aggressive substances at initial stages. The observations demonstrate that ECC containing SSP was durable and maintains better mechanical performance over fully MSS and FS containing mixes. This improvement finds a place in construction of hydraulic structures under aggressive environments.

Mechanical performance of engineered cementitious composites incorporating recycled glass powder

2020 ◽  
Vol 47 (12) ◽  
pp. 1311-1319 ◽  
Author(s):  
Adeyemi Adesina ◽  
Sreekanta Das
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Glass Powder ◽  
Mechanical Performance ◽  
Partial Replacement ◽  
Cementitious Composite ◽  
Engineered Cementitious Composite ◽  
Recycled Glass ◽  
Alternative Materials ◽  
Coal Power Plants

Engineered cementitious composite (ECC) is conventionally made up of high content fly ash (FA) combined with Portland cement (PC) as a binder. However, the growing call for sustainability is leading to continuous decommissioning of various coal power plants around the world thereby limiting the supply of fly ash available for ECC production. Therefore, it is of high importance to find alternative materials that can be incorporated into ECC as a partial replacement of the conventional binders. This experimental investigation was carried out to investigate the feasibility of incorporating glass powder (GP) as binder into ECC mixtures. The mechanical performance in terms of its compressive, tensile, and flexural properties was evaluated. Results from this study showed that 25% FA can be replaced with GP without any significant reduction in the mechanical performance of ECC mixtures. Microstructural investigations of the mixtures incorporating GP show good bonding between the cementitious matrix and the fibres.

scholarly journals Effect of Fibre Types on the Tensile Behaviour of Engineered Cementitious Composites

2021 ◽  
Vol 8 ◽  
Author(s):  
Mingzhang Lan ◽  
Jian Zhou ◽  
Mingfeng Xu
Keyword(s):  
Mechanical Properties ◽  
Experimental Result ◽  
Tensile Behaviour ◽  
Cementitious Composites ◽  
Matrix Interface ◽  
Cementitious Composite ◽  
Engineered Cementitious Composite ◽  
Fibre Bridging ◽  
The Difference ◽  
Fibre Matrix

Engineered cementitious composite (ECC) is a group of ultra-ductile fibre-reinforced cementitious composites, characterised by high ductility and moderate content of short discontinuous fibre. The unique tensile strain-hardening behaviour of ECC results from a deliberate design based on the understanding of micromechanics between fibre, matrix, and fibre–matrix interface. To investigate the effect of fibre properties on the tensile behaviour of ECCs is, therefore, the key to understanding the composite mechanical behaviour of ECCs. This paper presents a study on the fibre-bridging behaviour and composite mechanical properties of ECCs with three types of fibres, including oil-coated polyvinyl alcohol (PVA) fibre, untreated PVA fibre, and polypropylene (PP) fibre. The experimental result reveals that various fibres with different properties result in difference in the fibre-bridging behaviour and composite mechanical properties of ECCs. The difference in the composite mechanical properties of ECCs with different fibres was interpreted by analysing the fibre-bridging behaviour.

Performance of FRP confined and unconfined engineered cementitious composite exposed to seawater

2019 ◽  
Vol 53 (28-30) ◽  
pp. 4285-4304 ◽  
Author(s):  
Alaa Mohammedameen ◽  
Abdulkadir Çevik ◽  
Radhwan Alzeebaree ◽  
Anıl Niş ◽  
Mehmet Eren Gülşan
Keyword(s):  
Mechanical Behaviour ◽  
Mechanical Performance ◽  
Basalt Fiber ◽  
Polymer Materials ◽  
Fiber Reinforced Polymer ◽  
Cementitious Composite ◽  
Fiber Reinforced ◽  
Engineered Cementitious Composite ◽  
Reinforced Polymer ◽  
Seawater Environment

Conventional concrete suffers from brittle failures under mechanical behaviour, and lack of ductility results in the loss of human life and property in earthquake zones. Therefore, the degree of ductility becomes significant in seismic regions. This paper investigates the influence of poly-vinyl alcohol fibers, basalt fiber-reinforced polymer (BFRP) and carbon fiber-reinforced polymer (CFRP) fabrics on the ductility and mechanical performance of low (LCFA) and high (HCFA) calcium fly ash-based engineered cementitious composite concrete. The study also focuses on the mechanical behaviour of the CFRP and BFRP materials using different matrix types exposed to 3.5% seawater environment. Cyclic loading and scanning electron microscopy observations were also performed to see the effect of chloride attack on mechanical performance and ductility of the specimens. In addition, utilization of CFRP and BFRP fabrics as a retrofit material is also evaluated. Results indicated that the degree of ductility and mechanical performance were found to be superior for the CFRP-engineered cementitious composite hybrid specimens under ambient environment, while LCFA-CFRP hybrid specimens showed better performance under seawater environment. The effect of matrix type was also found significant when engineered cementitious composite is used together with fiber-reinforced polymer materials. In addition, both fiber-reinforced polymer materials can be used as a retrofit material under seawater environment.

scholarly journals Preliminary Analysis of the Ductility and Crack-Control Ability of Engineered Cementitious Composite with Superfine Sand and Polypropylene Fiber (SSPP-ECC)

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2609
Author(s):  
Zhiqing Zhu ◽  
Guojin Tan ◽  
Weiguang Zhang ◽  
Chunli Wu
Keyword(s):  
Crack Width ◽  
Large Scale ◽  
Bending Strength ◽  
Flexural Modulus ◽  
Silica Sand ◽  
Surface Model ◽  
Cementitious Composite ◽  
Crack Control ◽  
Engineered Cementitious Composite ◽  
Pva Fiber

Engineered cementitious composite (ECC) is a potential cement-based material with the abilities of large deformation and crack width control. However, ECC is difficult to popularize in many developing countries because the costs of silica sand and polyvinyl alcohol (PVA) fiber with a surface coating are too high for practical engineering. Therefore, we proposed an economical ECC with superfine river sand and polypropylene (PP) fiber (SSPP-ECC) to replace PVA fiber and silica sand. The SSPP-ECC proposed in this paper is a sustainable material using local material ingredients, which has considerable adaptability for large-scale engineering applications. The 16 groups of specimens were prepared through a factorial design method, curing for four-point bending tests. The bending strength, deflection, flexural modulus of elasticity, and crack width were measured and calculated during the test. The factor analysis of the test results shows that the contents of fiber and fly ash had significant effects on the ductility of SSPP-ECC with an extra combined effect at the same time, and a response surface model with high accuracy was fitted to predict the yield length of SSPP-ECC. The ductility of SSPP-ECC was positively related to its crack-control ability and it was shown that the crack width of SSPP-ECC increased significantly with a high content of superfine sand. This paper proposed a reasonable way to utilize superfine sand and provided the mix proportion of SSPP-ECC with characteristics of deformation hardening and multi-cracking, which may cater to the demands of many concrete components on ductility and crack resistance.

The mechanical properties of engineered cementitious composites containing limestone powder replaced by microsilica sand

2013 ◽  
Vol 40 (2) ◽  
pp. 151-157 ◽  
Author(s):  
Kazim Turk ◽  
Serhat Demirhan
Keyword(s):  
Mechanical Properties ◽  
Silica Sand ◽  
Limestone Powder ◽  
Experimental Program ◽  
Cementitious Composite ◽  
Engineered Cementitious Composite ◽  
Four Levels ◽  
Positive Effect ◽  
Composite Properties ◽  
Reference Mixture

In this study, an experimental program is conducted to understand the effect of the limestone powder (LSP) content replaced by silica sand on the composite properties. For this purpose, five different engineered cementitious composite (ECC) mixtures were adopted: ECC mixture with only silica sand (SS) for control purposes and four ECC mixtures in which SS is partially replaced by four levels of replacements (25%, 50%, 75%, and 100% by weight of total SS) of LSP. The properties of ECC mixtures produced were investigated for the ages of 3, 28, and 90 days. It was concluded that the mechanical properties of the ECC mixtures with LSP were in general higher than the reference mixture with only SS for all curing ages. Increase in the LSP content had a positive effect on the performance of the compressive strength, fracture toughness, and flexural strength at the ages of 3 and 28 days while this was not valid at the age of 90 days when compared to the reference mixture. Also, the ductility of the ECC beams strongly depends on the LSP content and specimen age.

scholarly journals Engineering Properties of Engineered Cementitious Composite and Multi-Response Optimization Using PCA-Based Taguchi Method

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2402 ◽  
Author(s):  
Junfei Zhong ◽  
Jun Shi ◽  
Jiyang Shen ◽  
Guangchun Zhou ◽  
Zonglin Wang
Keyword(s):  
Taguchi Method ◽  
Mix Design ◽  
Silica Sand ◽  
Engineering Properties ◽  
Cementitious Composite ◽  
Design Factor ◽  
Engineered Cementitious Composite ◽  
Utility Concept ◽  
Thaw Cycle ◽  
Principal Performance

The engineered cementitious composite (ECC) mixtures were prepared with Portland cement, ground fly ash, silica sand, and polyvinyl alcohol (PVA) fibers. Accordingly, four mix design factors with five levels each were designed using the Taguchi method. The engineering properties of ECC (flow expansion, compressive strength, flexural strength, charge passed, and maximum freeze–thaw cycle) were evaluated, and the single-response optimizations were conducted separately. Unlike other studies assigning a relative weighting parameter to each response, the principal component analysis (PCA) was innovatively introduced to optimize the ECC’s multiple responses so that the single principal performance was obtained from the most objective perspective. Furthermore, the weighting parameters for utility concept were determined by the PCA. Thereafter, an optimum mix formulation was estimated using the PCA-based Taguchi method and the updated utility concept, which provided the most desired balance of these engineering properties. Finally, the contribution of each mix design factor to the principal performance of ECC was examined, and the estimated mix formulation was verified via an additional experiment.

Sign in / Sign up

Export Citation Format

Share Document