scholarly journals PENERAPAN METODE POLINOM NEWTON GREGORY MAJU DAN POLINOM NEWTON GREGORY MUNDUR DENGAN METODE HAMILTON-PERRY DALAM MEMPREDIKSI JUMLAH PENDUDUK SUMATERA UTARA.

JURNAL CURERE ◽  
2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Ratna Wahyuni ◽  
Indah Simamora
Keyword(s):  
Total Error ◽  
Population Data ◽  
Polynomial Method ◽  
Population Census ◽  
A Value ◽  
The Difference ◽  
Relative Errors ◽  
Time And Energy ◽  
North Sumatra ◽  
Population Prediction

Population data needs are absolute things that must be met by BPS, but the most complete source of population data comes from population census results. Meanwhile, the implementation of the population census is only once every 10 years because it requires cost, time, and energy. Population prediction in the following year in each census period needs to be done to determine the difference in population growth in that year. Therefore, researchers are interested in studying the "Application of the Advanced Newton Gregory Polynomic Method and the Newton Gregory Backward Polynomic with the Hamilto-Perry Method in Predicting the Population of North Sumatra." this case the researcher will analyze between the three census periods. The purpose of this study is to obtain effective results from the three methods so that it can be used as an alternative application for the Central Statistics Agency (BPS) of North Sumatra province to predict the population in the year between the census. For Hamilton-perry, the application of the method is easy to do because the calculation process is uncomplicated and the data used as prediction material is very minimal, but the predicted value produces a non-rounded value so it needs to be rounded but when the value has been rounded there is a difference between the value not rounded to the rounded value aggressively. Therefore we need an adjustment to the value of rounding results based on the value not rounded. Then based on an aggregate trial of population prediction using the Hamilton-Perry method it produces a value that is higher than the actual value. For the advanced newton gregory polynomic method and the backward newton gregory polynomic each obtained total relative error isΣ𝜀𝑅=0,31412327 and Σ𝜀𝑅=0,3522818. From the two relative errors it is known that the total error for the advanced Newtonton polynomial method is smaller than the total error for the backward Newtonian polynomial method. Thus the Newton Newton method of advanced polynomial has better accuracy

scholarly journals Sistem Informasi Pengolahan Data Kependudukan Pada Kantor Desa Sampean Berbasis Android

2020 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Muhamad Alda
Keyword(s):  
Information System ◽  
Information Systems ◽  
Data Processing ◽  
Population Data ◽  
Distribution Data ◽  
Microsoft Excel ◽  
Time And Energy ◽  
The Village ◽  
North Sumatra

The population data is the data have to be in record in any office the villages around. With the citizens data , the village office can do monitoring inhabitant of which is found in the neighborhood. So far, the village office sampean kecamatan sungai kanan kabupaten labuhan batu selatan, north sumatra still use application desktop in doing processing the population data that is use application microsoft excel .In such a manner as there are still several problems and the obstacles, especially time and energy issued when their distribution data population in parties in need by the village office sampean. The purpose of he did this research is to design and construct information system the population data processing based android. With the information systems that in designed by the writer, is expected to help parties the village office sampean in doing processing the population data and do distribution the population data easily And rapidly through a smartphone android. Information system built by using application kodular and a database airtable

Impact Assessment of Dynamic Characteristics on the Hydraulic Driven Machinery Operation

2018 ◽  
pp. 1-12
Author(s):  
A. D. Terenteva
Keyword(s):  
Dynamic Error ◽  
Total Error ◽  
Soil Layer ◽  
Hydraulic Drive ◽  
Hydraulic Cylinder ◽  
Working Mechanism ◽  
Automated Control ◽  
Vertical Coordinate ◽  
Construction Machinery ◽  
The Difference

In civil engineering in Russia, trenching for utilities is currently under digging. To perform such works, it is necessary to use high-precision construction machinery, because inaccurate performance of works can lead to the break down of existing utilities, thereby affecting the residents of nearby houses and demanding the additional works for renewal.The most universal labour saver to perform construction works is hydraulic driven single-bucket excavators, which provide up to 38% of works. Therefore, to improve technical characteristics that affect the accuracy of the work performed is an important task.High requirements for the performance of works are defined by existing construction regulations: an allowable soil layer to remain is at most 0.05 m. To fulfil such requirements, an exact assessment of the working mechanism position and a trench profile is necessary.Examination of a manually operated digging process shows that an operator provides operations untimely, however an automated control system can solve this problem. Dynamic phenomena in the working mechanism have the greatest impact on the accuracy of the works performed.To assess the bucket digging edge position accuracy, a mathematical model of the working mechanism has been created. Based on the cycle scheme of the working process, the excessive displacements of the hydraulic cylinder rods under the load are taken into account. By the end of the cycle, the difference between the specified and obtained positions along the vertical coordinate has been 0.0892 m.A dynamic error of the hydraulic drive system of the working mechanism is considered as a sum of the error due to excessive displacements of the hydraulic cylinder rods and the error due to delay of the hydraulic drive, with the latter being calculated for the average time of delay taking into account the data available in the literature. The total error of the bucket digging edge position of the working mechanism is 0.1176 m, which is 2 times more than the value of 0.05 mConformity of all the links with specification requirements does not guarantee compliance with the required displacement accuracy of the bucket digging edge, and, thus, the soil layer to remain in the base of the trench can exceed the regulated value of 0.05 m.

EKSTRAK KULIT BUAH MANGGIS (Garcinia Mangostana L.) SEBAGAI OBAT ANTI DIARE

2019 ◽  
Vol 2 (1) ◽  
pp. 9-13
Author(s):  
Zaim Anshari ◽  
Chrismis Novalinda Ginting ◽  
Linda Chiuman ◽  
Yuliani Mardiati Lubis
Keyword(s):  
Blood Vessels ◽  
Smooth Muscles ◽  
Latin Square ◽  
Ethanol Extract ◽  
Garcinia Mangostana ◽  
Pharmacology And Toxicology ◽  
The Difference ◽  
North Sumatra ◽  
Papaverine Hydrochloride

This study aims to determine whether mangosteen rind extract (in the form of ethanol extract/EE) can be used as an anti-diarrhea drug after compared with other anti-diarrhea substances in three experimental groups. This research is an in vitro experimental study using adult male guinea pigs weighing 400-600 gr through the standard method of Magnus with the Latin square controlled experiment design. The study was conducted at the Pharmacology and Toxicology Laboratory of the Faculty of Pharmacy, University of North Sumatra. The results showed that the contraction of ileum in Ach with Atp + Ach compared the difference in contraction of ileum Ach with EE + Ach showed the difference in difference between the two contractions of the ileum was significant, the contraction of ileum in His with Dip + His compared indifference in contraction of ileum His with EE + His showed a difference indifference. the two ileal contractions are significant, the ileal contraction in the bar with Papa + Bar compared to the difference between the ileum bar contraction with EE + Bar shows no difference in the difference between the two ileum contractions. The conclusion is that the Mangosteen Skin Ethanol Extract works similarly to Papaverine Hydrochloride which is an antidiarrheal drug used to relax smooth muscles so that it can also make blood vessels dilate by relaxing smooth muscles in the walls of blood vessels.

scholarly journals The Water Footprint of Primary and Secondary Processing of Beef from Different Cattle Breeds: A Value Fraction Allocation Model

2021 ◽  
Vol 13 (12) ◽  
pp. 6914
Author(s):  
Frikkie Alberts Maré ◽  
Henry Jordaan
Keyword(s):  
Water Footprint ◽  
Negative Relationship ◽  
High Water ◽  
Allocation Model ◽  
Cattle Breeds ◽  
A Value ◽  
Average Production ◽  
High Water Intake ◽  
The Difference ◽  
By Products

The high water intake and wastewater discharge of slaughterhouses have been a concern for many years. One neglected factor in previous research is allocating the water footprint (WF) to beef production’s different products and by-products. The objective of this article was to estimate the WF of different cattle breeds at a slaughterhouse and cutting plant and allocate it according to the different cuts (products) and by-products of beef based on the value fraction of each. The results indicated a negative relationship between the carcass weight and the processing WF when the different breeds were compared. Regarding a specific cut of beef, a kilogram of rib eye from the heaviest breed had a processing WF of 614.57 L/kg, compared to the 919.91 L/kg for the rib eye of the lightest breed. A comparison of the different cuts indicated that high-value cuts had higher WFs than low-value cuts. The difference between a kilogram of rib eye and flank was 426.26 L/kg for the heaviest breed and 637.86 L/kg for the lightest breed. An option to reduce the processing WF of beef is to lessen the WF by slaughtering heavier animals. This will require no extra investment from the slaughterhouse. At the same time, the returns should increase as the average production inputs per kilogram of output (carcass) should reduce, as the slaughterhouse will process more kilograms.

scholarly journals A ΔSOC-based equalization strategy applied to industry

2020 ◽  
Author(s):  
Maonan Wang ◽  
Chun Chang ◽  
Feng Ji
Keyword(s):  
Open Circuit ◽  
Battery Pack ◽  
Battery Management System ◽  
Battery Management ◽  
Battery Cell ◽  
New Strategy ◽  
The Difference ◽  
Relative Errors ◽  
The Relationship ◽  
Battery Cells

Abstract The voltage-based equalization strategy is widely used in the industry because the voltage (U) of the battery cell is very easy to obtain, but it is difficult to provide an accurate parameter for the battery management system (BMS). This study proposes a new equalization strategy, which is based on the difference between the state of charge (SOC) of any two battery cells in the battery pack, that is, a ΔSOC-based equalization strategy. The new strategy is not only as simple as the voltage-based equalization strategy, but it can also provide an accurate parameter for the BMS. Simply put, using the relationship between the open circuit voltage and the SOC of the battery pack, the proposed strategy can convert the difference between the voltage of the battery cells into ΔSOC, which renders a good performance. Additionally, the required parameters are all from the BMS, and no additional calculation is required, which makes the strategy as simple as the voltage-based balancing strategy. The four experiments show that the relative errors of ΔSOC estimated by the ΔSOC-based equalization strategy are 0.37%, 0.39%, 0.1% and 0.17%, and thereby demonstrate that the ΔSOC-based equalization strategy proposed in this study shows promise in replacing the voltage-based equalization strategy within the industry to obtain better performance.

Berechnung kinetischer Isotopeneffekte für die Reaktion von Methyljodid mit Cyanid-Ion

1966 ◽  
Vol 21 (9) ◽  
pp. 1377-1384
Author(s):  
A. V. Willi
Keyword(s):  
Transition State ◽  
Secular Equation ◽  
Isotope Effects ◽  
Force Constants ◽  
Bond Breaking ◽  
Bending Force ◽  
A Value ◽  
Order Of Magnitude ◽  
Deuterium Isotope Effects ◽  
The Difference

Kinetic carbon-13 and deuterium isotope effects are calculated for the SN2 reaction of CH3I with CN-. The normal vibrational frequencies of CH3I, the transition state I · · · CH3 · · · CN, and the corresponding isotope substituted reactants and transition states are evaluated from the force constants by solving the secular equation on an IBM 7094 computer.Values for 7 force constants of the planar CH3 moiety in the transition state (with an sp2 C atom) are obtained by comparison with suitable stable molecules. The stretching force constants related to the bonds being broken or newly formed (fCC, fCC and the interaction between these two stretches, /12) are chosen in such a way that either a zero or imaginary value for νʟ≠ will result. Agreement between calculated and experimental methyl-C13 isotope effects (k12/ k13) can be obtained only in sample calculations with sufficiently large values of f12 which lead to imaginary νʟ≠ values. Furthermore, the difference between fCI and fCC must be small (in the order of 1 mdyn/Å). The bending force constants, fHCI and fHCC, exert relatively little influence on k12/k13. They are important for the D isotope effect, however. As soon as experimental data on kH/kD are available it will be possible to derive a value for fHCC in the transition state if fHCI is kept constant at 0.205 mdynA, and if fCI, fCC and f12 are held in a reasonable order of magnitude. There is no agreement between experimental and calculated cyanide-C13 isotope effects. Possible explanations are discussed. — Since fCI and fCC cannot differ much it must be concluded that the transition state is relatively “symmetric”, with approximately equal amounts of bond making and bond breaking.

Analisis Skrining Fitokimia dan Aktivitas Antioksidan Ekstrakk Biji Sangrai Kopi Robusta (Coffea canephora) dari Tanaman Hasil Pemupukan Organik dan Anorganik

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Farah Aida Qotrun Nada ◽  
Tintrim Rahayu ◽  
Ari Hayati
Keyword(s):  
Statistical Tests ◽  
Linear Regression Analysis ◽  
Coffea Canephora ◽  
Coffee Bean ◽  
Phytochemical Screening ◽  
Robusta Coffee ◽  
A Value ◽  
Coffee Beans ◽  
Ic50 Value ◽  
The Difference

Ground coffee is coffee beans that have been roasted, ground or ground so that they have a smooth shape. The purpose of this study was to determine the content of compounds in robusta coffee roasted seed extract (Coffea canephora) from plants produced by organic and inorganic fertilization, and to know the difference in compounds between the results of organic and inorganic fertilization. The characteristics of phytochemical screening were carried out qualitatively on alkaloids, flavonoids, tannins, terpenoids and saponins and the antioxidant activity was carried out by the DPPH (1,1-dipenyl-2-picrihidrazil) method. Phytochemical screening characteristic test results show that robusta coffee bean extract extract from the results of organic and inorganic fertilization both contain flavonoids, alkaloids, tannins, and saponins, while the antioxidant test activity of robusta coffee beans extracts shows differences based on the results of statistical tests of linear regression analysis with the IC50 value the highest antioxidant content was inorganic coffee roasted bean extract only 14.0629 ppm compared to the organic roasted extract with a value of 30.6159 ppmKeywords: Robusta Coffee (Coffea canophora), Phytochemical Screening, DPPH MethodABSTRAKKopi bubuk adalah biji kopi yang telah disangrai digiling atau ditumbuk sehingga mempunyai bentuk halus. Tujuan dari penelitian ini adalah untuk mengetahui kandungan senyawa dalam ekstrak biji sangrai kopi robusta (Coffe canephora) dari tanaman hasil pemupukan organik dan anorganik, dan mengetahui perbedaan senyawa antara hasil pemupukan organik dan anorganik. Karakteristik skrining fitokimia dilakukan secara kualitatif yang dilakukan terhadap alkaloid, flavonoid, tanin, terpenoid dan saponin dan aktivitas antioksidan dilakukan dengan metode DPPH (1,1-difenil-2-pikrihidrazil). Hasil uji karakteristik skrining fitokimia menunjukkan bahwa ekstrak biji sangrai kopi robusta dari hasil pemupukan oganik dan anorganik keduanya sama mengandung senyawa flavonoid, alkaloid, tanin, dan saponin,  sedangkan pada aktifitas uji antioksidan ekstrak biji sangrai kopi robusta menunjukan perbedaan berdasarkan hasil uji statistik analisis regresi linear dengan nilai IC50 kadar antioksidan paling tinggi adalah ekstrak biji sangrai kopi anorganik hanya 14,0629 ppm dibandingkan dengan ekstrak sangrai dari organik dengan nilai 30,6159 ppm.Kata kunci : Kopi Robusta (Coffea canophera), Skrining Fitokimia, Metode DPPH

PERANCANGAN APLIKASI SENSUS PENDUDUK PADA BADAN PUSAT STATISTIK KOTA MAKASSAR BERBASIS ANDROID

2021 ◽  
Vol 6 (1) ◽  
pp. 48
Author(s):  
Nurkhalik Wahdanial Asbara
Keyword(s):  
Data Collection ◽  
Census Data ◽  
Population Data ◽  
Accurate Information ◽  
Population Census ◽  
Male Population ◽  
Female Population ◽  
Technological Developments ◽  
The Government ◽  
Population Ratio

Technological developments and changes in government systems are developing rapidly. Both of these lead to efforts to carry out duties, protect functions and serve the community. This encourages the government to take various adjustment steps quickly in line with the dynamics of development that occur. One of them is through a population census. The population census is an important issue that must be handled properly. The population census in this study takes population data in an area based on the number of male population, female population, ratio, and population density. The data was taken and submitted to the Makassar City Statistics Agency. Population Census is a presentation of information that has the ability to present accurate information, and helps facilitate the search for a population census data. The population census is carried out every 5 years which is carried out by census officers to carry out data collection to each resident's house, the data collection process is carried out by conventional recording and submitting it to the central statistics agency for database entry. With this application, it is expected to provide convenience to Population census officers to perform the process of inputting population data and the data is directly stored in the database without having to return to the office to input again.

ETUDE DU POUVOIR NUTRITIF EN PHOSPHORE DE CERTAINS SOLS DU QUEBEC A L'AIDE DU 32P

1976 ◽  
Vol 56 (3) ◽  
pp. 285-291
Author(s):  
B. TOUATI ◽  
C. PLENCHETTE ◽  
M. TABI
Keyword(s):  
Soil Phosphorus ◽  
Phosphate Fertilizer ◽  
Soil Types ◽  
K Value ◽  
Type Experiment ◽  
A Value ◽  
The Difference ◽  
The Way

In a pot-type experiment with ryegrass, 32P was used to label isotopically exchangeable soil phosphorus as well as a phosphate fertilizer. The tagging of both forms of phosphorus enable us to determine the pool (L) for soil reserves and the A value which is the availability of these reserves in the presence of fertilizer. The authors establish correlations between the ratio K = L/A and the assimilable phosphorus as determined by the Bray II method, and also between K and the "extra" phosphorus. The authors state that the latter was the difference between the plant phosphorus with and without fertilizer. From this study it is concluded: (1) that the K value seems to be a better criterion than the amount of assimilable phosphorus to estimate the phosphorus fertility of a soil; (2) that the study of the variation of the K value according to the soil types informs us about the reserves behavior and about the way of nutrition for the plant. The calculation of the K value is aimed toward a more adequate fertilization for given types of soil.

scholarly journals Archie's law – a reappraisal

Solid Earth ◽  
2016 ◽  
Vol 7 (4) ◽  
pp. 1157-1169 ◽  
Author(s):  
Paul W. J. Glover
Keyword(s):  
Systematic Errors ◽  
Apparent Paradox ◽  
Archie’S Law ◽  
A Value ◽  
The Difference ◽  
Reservoir Parameter ◽  
Parameter Values ◽  
Electrical Data ◽  
Extra Parameter ◽  
Better Than

Abstract. When scientists apply Archie's first law they often include an extra parameter a, which was introduced about 10 years after the equation's first publication by Winsauer et al. (1952), and which is sometimes called the “tortuosity” or “lithology” parameter. This parameter is not, however, theoretically justified. Paradoxically, the Winsauer et al. (1952) form of Archie's law often performs better than the original, more theoretically correct version. The difference in the cementation exponent calculated from these two forms of Archie's law is important, and can lead to a misestimation of reserves by at least 20 % for typical reservoir parameter values. We have examined the apparent paradox, and conclude that while the theoretical form of the law is correct, the data that we have been analysing with Archie's law have been in error. There are at least three types of systematic error that are present in most measurements: (i) a porosity error, (ii) a pore fluid salinity error, and (iii) a temperature error. Each of these systematic errors is sufficient to ensure that a non-unity value of the parameter a is required in order to fit the electrical data well. Fortunately, the inclusion of this parameter in the fit has compensated for the presence of the systematic errors in the electrical and porosity data, leading to a value of cementation exponent that is correct. The exceptions are those cementation exponents that have been calculated for individual core plugs. We make a number of recommendations for reducing the systematic errors that contribute to the problem and suggest that the value of the parameter a may now be used as an indication of data quality.

Sign in / Sign up

Export Citation Format

Share Document