scholarly journals Estimation and analysis of particles from seeds of maximiliana maripa (aubl.) drude (arecaceae)

2020 ◽  
Vol 13 (10) ◽  
pp. 28
Author(s):  
C. B. M. Farias ◽  
A. Arrolho ◽  
M. C. M. Silva ◽  
R. R. Cruz ◽  
L. P. N. Ramos ◽  
...  

The present work aims to estimate the length and width of the seeds, through the analysis of digital images and to validate the methodology through statistical data. To estimate the length and width of seeds via image analysis, 50 M.maripa seeds were used. The seeds were arranged in a decreasing way from 1 to 25 diagonally, on a matte black fabric, on a phenotyping platform, with a Sony Hd Avchd progressive digital Gps camera, coupled at a height of 50 cm. The images were captured by the camera in automatic mode, without flash, automatic ISO speed, in an RGB system and with a size above 2Mb. Soon after the seeds passed the traditional evaluation method with the aid of a digital caliper, measured in terms of length and width. The images were analyzed with the ImageJ software. Statistical analyzes were performed with the aid of the Sigmaplot program. The results of the length and width of the seeds of Inajá seen by the caliper and digital image via camera, were very distant, showing high dispersion and low correlation r = 0.4037 and R² = 0.1629 for length and r = 0.2985 and R² = 0.0891, showing that the Compared data had little similarity. The error between both the methodology was considered low: 3,81063 and 3,769 for the variables of seed length and width. The method of analysis by digital image and caliper for estimating the length and width of Maximiliana maripa seeds showed a low correlation between the two methodologies. The use of image analysis to estimate the length and width of M. maripa seeds is not indicated.

Author(s):  
Shravya N ◽  
Swetha Ravichandran ◽  
Rinu Thomas

Aim: To compare the eyelid angle measured by using a manual method (Using protractor) and digital image analysis method (Using ImageJ software) at different distances of eye gaze. Methodology: This prospective cross-sectional study was conducted in the preclinical lab at Manipal College of Health Professions. Subjects with no eyelid abnormalities were included in the study and they were asked to fixate at different distances a) at 3 metre (Distance gaze) b) at 70 cm (Intermediategaze) and c) at 40 cm(Near gaze). Using a protractor, the eyelid angle measurements were repeated at various distances which comprised the manual measurement. In the image analysis method, images were captured during distance, intermediate and near gaze using smartphone placed on theside of the face. These images were then analysed using ImageJ software for determining eyelid angle using image analysis method. Palpebral fissure height, Palpebral fissure width, Interpupillary distance, Intercanthal width, Binocular width, Height of open upper lid were some additional anthropometry measurements that were done using meter scale and PD ruler. Results: The mean age of the participants was 20±0.5 years. Anthropometry measurements of the eyelid and Palpebral fissure were done using meter scaleand PD ruler. The mean and standard deviation of the measured parametersare as follows Interpupillary distance: 60.95±2.37 mm, Endo Inter canthal distance: 32.20±2.39 mm, Exo Inter cantal distance: 95.50±3.80 mm, Palpebralfissure height_OD: 12.11±1.32 mm, Palpebral fissure height_OS:12.16±1.46mm, PFW_OD: 32.00±1.10 mm, PFW_OS: 32.11±1.24 mm, Height of upper eyelids_OD: 10.26±1.66 mm and Height of upper eyelids_OS:10.42±1.83 mm. In the right eye, there was no statistically significant difference (p>0.05) between manual protractor method and digital image analysismethod at distance but there was a statistically significant difference (p<0.05)between manual protractor method and digital image analysis method atIntermediate and near. In left eye, there was statistically significant difference(p<0.05) between manual protractor method and digital image analysis method at all three distances. Conclusion: There is a significant difference in eyelid angle measured using manual protractor method and digital image analysis method. The measurement of eyelid angle serves as a critical reference point during cosmetic and reconstructive surgical interventions of the eyelid and accurate measurements are essential for preoperative assessment, surgical planning and postoperative evaluation. Hence more studies on the validation of the anthropometry measurements and eyelid angle using digital image analysis areessential to use digital image analysis in routine eye care practice.


Holzforschung ◽  
2018 ◽  
Vol 72 (6) ◽  
pp. 477-488 ◽  
Author(s):  
So Sun Lee ◽  
Gi Young Jeong

AbstractSwelling (Sw) and shrinking (Sh) ofLarix kaempferiandCryptomeria japonicawoods were observed with the methods digital caliper, image analysis, and digital image correlation (DIC) as a function of cubic sample sizes (203, 503, and 1003mm3) and the three anatomical directions of wood. The moisture content (MC) of the samples was 19, 12, and 8%, such as MC→ and MCsatur. Coefficients of swelling were significantly different at the three sample sizes. Coefficients of shrinking were significantly different by species and sample size. Results of DIC revealed that the magnitude of mixed Sw/Sh behaviors increased with increasing sample size.


Author(s):  
Vinod K. Berry ◽  
Xiao Zhang

In recent years it became apparent that we needed to improve productivity and efficiency in the Microscopy Laboratories in GE Plastics. It was realized that digital image acquisition, archiving, processing, analysis, and transmission over a network would be the best way to achieve this goal. Also, the capabilities of quantitative image analysis, image transmission etc. available with this approach would help us to increase our efficiency. Although the advantages of digital image acquisition, processing, archiving, etc. have been described and are being practiced in many SEM, laboratories, they have not been generally applied in microscopy laboratories (TEM, Optical, SEM and others) and impact on increased productivity has not been yet exploited as well.In order to attain our objective we have acquired a SEMICAPS imaging workstation for each of the GE Plastic sites in the United States. We have integrated the workstation with the microscopes and their peripherals as shown in Figure 1.


2000 ◽  
Vol 10 (2) ◽  
pp. 7-9
Author(s):  
Yaser Natour ◽  
Christine Sapienza ◽  
Mark Schmalz ◽  
Savita Collins

2019 ◽  
Vol 8 (3) ◽  
pp. 11 ◽  
Author(s):  
Gustav Stålhammar ◽  
Thonnie Rose O. See ◽  
Stephen Phillips ◽  
Stefan Seregard ◽  
Hans E. Grossniklaus

2008 ◽  
Vol 14 (2) ◽  
pp. 192-200 ◽  
Author(s):  
Hiromasa Tanaka ◽  
Gojiro Nakagami ◽  
Hiromi Sanada ◽  
Yunita Sari ◽  
Hiroshi Kobayashi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document