scholarly journals Design and Analysis of a Wind Turbine Blade with Dimples to Enhance the Efficiency through CFD with ANSYS R16.0

2018 ◽  
Vol 207 ◽  
pp. 02004
Author(s):  
M. Rajaram Narayanan ◽  
S. Nallusamy ◽  
M. Ragesh Sathiyan
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Turbine Blades ◽  
Electrical Energy ◽  
Optimum Combination ◽  
Surface Topology ◽  
Wind Turbine Blades ◽  
Lift And Drag

In the global scenario, wind turbines and their aerodynamics are always subjected to constant research for increasing their efficiency which converts the abundant wind energy into usable electrical energy. In this research, an attempt is made to increase the efficiency through the changes in surface topology of wind turbines through computational fluid dynamics. Dimples on the other hand are very efficient in reducing air drag as is it evident from the reduction of drag and increase in lift in golf balls. The predominant factors influencing the efficiency of the wind turbines are lift and drag which are to be maximized and minimized respectively. In this research, surface of turbine blades are integrated with dimples of various sizes and arrangements and are analyzed using computational fluid dynamics to obtain an optimum combination. The analysis result shows that there is an increase in power with about 15% increase in efficiency. Hence, integration of dimples on the surface of wind turbine blades has helped in increasing the overall efficiency of the wind turbine.

scholarly journals Performance prediction of loop-type wind turbine

2020 ◽  
Vol 12 (2) ◽  
pp. 168781401984047
Author(s):  
Wonyoung Jeon ◽  
Jeanho Park ◽  
Seungro Lee ◽  
Youngguan Jung ◽  
Yeesock Kim ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Experimental Results ◽  
Scale Model ◽  
Dynamics Analysis ◽  
Blockage Ratio ◽  
Horizontal Axis Wind Turbine ◽  
Computational Fluid Dynamics Analysis

An experimental and analytical method to evaluate the performance of a loop-type wind turbine generator is presented. The loop-type wind turbine is a horizontal axis wind turbine with a different shaped blade. A computational fluid dynamics analysis and experimental studies were conducted in this study to validate the performance of the computational fluid dynamics method, when compared with the experimental results obtained for a 1/15 scale model of a 3 kW wind turbine. Furthermore, the performance of a full sized wind turbine is predicted. The computational fluid dynamics analysis revealed a sufficiently large magnitude of external flow field, indicating that no factor influences the flow other than the turbine. However, the experimental results indicated that the wall surface of the wind tunnel significantly affects the flow, due to the limited cross-sectional size of the wind tunnel used in the tunnel test. The turbine power is overestimated when the blockage ratio is high; thus, the results must be corrected by defining the appropriate blockage factor (the factor that corrects the blockage ratio). The turbine performance was corrected using the Bahaj method. The simulation results showed good agreement with the experimental results. The performance of an actual 3 kW wind turbine was also predicted by computational fluid dynamics.

Two-Dimensional Computational Fluid Dynamics Study on the Performance of Twin Vertical Axis Wind Turbine With Deflector

2020 ◽  
Vol 142 (8) ◽  
Author(s):  
Yichen Jiang ◽  
Peidong Zhao ◽  
Li Zou ◽  
Zhi Zong ◽  
Kun Wang
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
Energy Utilization ◽  
Offshore Wind ◽  
Two Dimensional ◽  
Vertical Axis Wind Turbine ◽  
Local Flow

Abstract The offshore wind industry is undergoing a rapid development due to its advantage over the onshore wind farm. The vertical axis wind turbine (VAWT) is deemed to be potential in offshore wind energy utilization. A design of the offshore vertical axis wind turbine with a deflector is proposed and studied in this paper. Two-dimensional computational fluid dynamics (CFD) simulation is employed to investigate the aerodynamic performance of wind turbine. An effective method of obtaining the blade’s angle of attack (AoA) is introduced in CFD simulation to help analyze the blade aerodynamic torque variation. The numerical simulations are validated against the measured torque and wake velocity, and the results show a good agreement with the experiment. It is found that the blade instantaneous torque is correlated with the local AoA. Among the three deflector configurations, the front deflector leads to favorable local flow for the blade, which is responsible for the improved performance.

Distributed wind resource assessment: Comparing measured annual energy production with predictions from computational fluid dynamics

2019 ◽  
Vol 43 (6) ◽  
pp. 657-672
Author(s):  
Devon L Martindale ◽  
Thomas L Acker
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Energy Production ◽  
Resource Assessment ◽  
Energy Output ◽  
Wind Resource Assessment ◽  
Production Values ◽  
The Us ◽  
Wind Resource

The US Department of Energy’s Distributed Wind Resource Assessment Workshop identified predicting the annual energy production of a kilowatt-sized wind turbine as a key challenge. This article presents the methods and results for predicting the annual energy production of two 2.1 kW Skystream 3.7 wind turbines using computational fluid dynamics, in this case Meteodyn WT. When compared with actual production data, annual energy production values were uniformly underpredicted, with errors ranging from 1% to in excess of 30%, depending on the solver settings and boundary conditions. The most accurate of the simulations with errors consistently less than 10% were achieved when using recommended solver settings of neutral atmospheric stability, and roughness values derived from the US National Land Cover Database. The software was used to create an annual energy production map for the modeling domain, which could be a valuable tool in estimating the energy output and economic value of a proposed wind turbine.

scholarly journals Numerical Investigation on Effect of Multiple Winglets for Wind Turbine Applications

2018 ◽  
Vol 7 (4.5) ◽  
pp. 450
Author(s):  
Prasad. G. ◽  
Ramesh. M. ◽  
Rajasekar. K.
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Reynolds Number ◽  
Wind Turbine ◽  
Numerical Investigation ◽  
Substantial Improvement ◽  
Tip Vortices ◽  
Induced Drag ◽  
Lift Curve ◽  
Improved Performance

The present article is an effort to examine the potential of multiple winglets to reduce the induced drag of the aerodynamic surface. The advantages of using multiple winglets include reduction of induced drag, increased L/D and improved performance of the Wind turbine. Computational Fluid Dynamics is utilized as to approach the effects of multiple winglets with NACA 24012 airfoil section for untwisted, rectangular wing. The testing of configurations is done at Reynolds number 290,000. FLUENT solver incorporated in ANSYS used for the numerical investigation of the steady flow over the wing. A substantial improvement in lift curve slope occurs with dihedral spread of the winglets. The dihedral spread also distributes the tip vortices. 

Sign in / Sign up

Export Citation Format

Share Document