scholarly journals DETERMINATION OF YOUNG’S DYNAMIC MODULUS OF POLYMER MATERIALS BY RESONANCE VIBRATING-REED METHOD

2019 ◽  
Vol 9 (4) ◽  
pp. 34-37
Author(s):  
Volodymyr Mashchenko ◽  
Valentine Krivtsov ◽  
Volodymyr Kvasnikov ◽  
Volodymyr Drevetskiy
Keyword(s):  
Cross Section ◽  
Dynamic Modulus ◽  
Polymer Materials ◽  
Experimental Setup ◽  
Mechanical Loss ◽  
Rectangular Shape ◽  
Accuracy Of Measurements ◽  
Analysis Of Results ◽  
Vibrating Reed

The paper deals with its own oscillations of a rectangular rod with a cross section of a rectangular shape. The method of determining real part of Young's dynamic modulus and tangent of mechanical loss of samples in the form of rods of a number of polymer materials by means of resonant vibrating-reed method are proposed. Experimental setup, algorithm and software for determining the amplitude of the sample oscillations are developed. The accuracy of measurements was determined and a comparative analysis of results was performed with data obtained by other methods.

scholarly journals Rational Choice of Reinforcement of Reinforced Concrete Frame Corners Subjected to Opening Bending Moment

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3438
Author(s):  
Michał Szczecina ◽  
Andrzej Winnicki
Keyword(s):  
Cross Section ◽  
Bending Moment ◽  
Plasticity Model ◽  
Reinforced Concrete Frame ◽  
Moment Frame ◽  
Concrete Frame ◽  
Rational Reinforcement ◽  
Eurocode 2 ◽  
Analysis Of Results

This paper discusses a choice of the most rational reinforcement details for frame corners subjected to opening bending moment. Frame corners formed from elements of both the same and different cross section heights are considered. The case of corners formed of elements of different cross section is not considered in Eurocode 2 and is very rarely described in handbooks. Several reinforcement details with both the same and different cross section heights are presented. The authors introduce a new reinforcement detail for the different cross section heights. The considered details are comprised of the primary reinforcement in the form of straight bars and loops and the additional reinforcement in the form of diagonal bars or stirrups or a combination of both diagonal stirrups and bars. Two methods of static analysis, strut-and-tie method (S&T) and finite element method (FEM), are used in the research. FEM calculations are performed with Abaqus software using the Concrete Damaged Plasticity model (CDP) for concrete and the classical metal plasticity model for reinforcing steel. The crucial CDP parameters, relaxation time and dilatation angle, were calibrated in numerical tests in Abaqus. The analysis of results from the S&T and FE methods allowed for the determination of the most rational reinforcement details.

Large-scale Motion of Solar Filaments

2000 ◽  
Vol 179 ◽  
pp. 205-208
Author(s):  
Pavel Ambrož ◽  
Alfred Schroll
Keyword(s):  
Magnetic Flux ◽  
Proper Motion ◽  
Time Scale ◽  
Large Scale ◽  
Accuracy Of Measurements ◽  
Solar Filaments ◽  
General Movement ◽  
Scale Motion ◽  
Velocity Scatter

AbstractPrecise measurements of heliographic position of solar filaments were used for determination of the proper motion of solar filaments on the time-scale of days. The filaments have a tendency to make a shaking or waving of the external structure and to make a general movement of whole filament body, coinciding with the transport of the magnetic flux in the photosphere. The velocity scatter of individual measured points is about one order higher than the accuracy of measurements.

A quantitative approach to inner shell losses

1978 ◽  
Vol 36 (1) ◽  
pp. 526-527 ◽  
Author(s):  
R.D. Leapman ◽  
P. Rez ◽  
D.F. Mayers
Keyword(s):  
Energy Transfer ◽  
Cross Section ◽  
Cross Sections ◽  
Accurate Determination ◽  
Background Intensity ◽  
Core Excitation ◽  
Quantitative Basis ◽  
Cross Section Differential ◽  
Bound Electrons

Microanalysis by EELS has been developing rapidly and though the general form of the spectrum is now understood there is a need to put the technique on a more quantitative basis (1,2). Certain aspects important for microanalysis include: (i) accurate determination of the partial cross sections, σx(α,ΔE) for core excitation when scattering lies inside collection angle a and energy range ΔE above the edge, (ii) behavior of the background intensity due to excitation of less strongly bound electrons, necessary for extrapolation beneath the signal of interest, (iii) departures from the simple hydrogenic K-edge seen in L and M losses, effecting σx and complicating microanalysis. Such problems might be approached empirically but here we describe how computation can elucidate the spectrum shape.The inelastic cross section differential with respect to energy transfer E and momentum transfer q for electrons of energy E0 and velocity v can be written as

Profil Penyakit Malaria Di Rumah Sakit Islam Siti Rahmah Padang Tahun 2018

2020 ◽  
Vol 2 (2) ◽  
pp. 08-15
Author(s):  
Rahma Triyana ◽  
Salmi Salmi
Keyword(s):  
Observational Study ◽  
Frequency Distribution ◽  
Cross Section ◽  
Laboratory Tests ◽  
Age Group ◽  
Normal Range ◽  
Cross Sectional ◽  
West Sumatra ◽  
Severity Of The Disease

Malaria is one of the health problems in Indonesia, especially West Sumatra. Determination of the description of Malaria disease in an area is needed to determine the spread and severity of the disease. This study aims to determine the frequency distribution according to age, sex and place of residence, description of the types of Plasmodium causes of Malaria and hematological features in Malaria patients at Siti Rahmah Padang Hospital in 2018. This type of research is a descriptive observational study with an approach or design cross section (cross sectional). The frequency distribution of Malaria sufferers in Siti Rahmah Padang Hospital in 2018 according to the highest age was in the age group 21-30 years as many as 28 cases (36.8%), the highest sex among men was 46 (60.5%) and the highest number of residences was found in Koto Tangah sub-district there were 31 cases (40.8%). The type of Plasmodium found in Malaria cases in Siti Rahmah Padang Hospital in 2018 was P. vivax (73 cases (96.05%)) and P. falciparum (3 cases (3.95%)). The results of laboratory tests on Hb, hematocrit, platelet and leukocyte levels in Malaria positive patients in Siti Rahmah Padang Hospital in 2018 were in the normal range.

Profil Penyakit Malaria di Rumah Sakit Islam Siti Rahmah Padang Tahun 2018

2020 ◽  
Vol 2 (2) ◽  
pp. 08-15
Author(s):  
Rahma Triyana Y ◽  
Salmi Salmi
Keyword(s):  
Observational Study ◽  
Frequency Distribution ◽  
Cross Section ◽  
Laboratory Tests ◽  
Age Group ◽  
Normal Range ◽  
Cross Sectional ◽  
West Sumatra ◽  
Severity Of The Disease

Malaria is one of the health problems in Indonesia, especially West Sumatra. Determination of the description of Malaria disease in an area is needed to determine the spread and severity of the disease. This study aims to determine the frequency distribution according to age, sex and place of residence, description of the types of Plasmodium causes of Malaria and hematological features in Malaria patients at Siti Rahmah Padang Hospital in 2018. This type of research is a descriptive observational study with an approach or design cross section (cross sectional). The frequency distribution of Malaria sufferers in Siti Rahmah Padang Hospital in 2018 according to the highest age was in the age group 21-30 years as many as 28 cases (36.8%), the highest sex among men was 46 (60.5%) and the highest number of residences was found in Koto Tangah sub-district there were 31 cases (40.8%). The type of Plasmodium found in Malaria cases in Siti Rahmah Padang Hospital in 2018 was P. vivax (73 cases (96.05%)) and P. falciparum (3 cases (3.95%)). The results of laboratory tests on Hb, hematocrit, platelet and leukocyte levels in Malaria positive patients in Siti Rahmah Padang Hospital in 2018 were in the normal range.

scholarly journals New Method for Analysis of the Temporomandibular Joint Using Cone Beam Computed Tomography

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3070
Author(s):  
Sebastian Iwaszenko ◽  
Jakub Munk ◽  
Stefan Baron ◽  
Adam Smoliński
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cross Section ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Section Plane ◽  
New Approach ◽  
Volume Of Interest ◽  
Gap Width

Modern dentistry commonly uses a variety of imaging methods to support diagnosis and treatment. Among them, cone beam computed tomography (CBCT) is particularly useful in presenting head structures, such as the temporomandibular joint (TMJ). The determination of the morphology of the joint is an important part of the diagnosis as well as the monitoring of the treatment results. It can be accomplished by measurement of the TMJ gap width at three selected places, taken at a specific cross-section. This study presents a new approach to these measurements. First, the CBCT images are denoised using curvilinear methods, and the volume of interest is determined. Then, the orientation of the vertical cross-section plane is computed based on segmented axial sections of the TMJ head. Finally, the cross-section plane is used to determine the standardized locations, at which the width of the gap between condyle and fossa is measured. The elaborated method was tested on selected TMJ CBCT scans with satisfactory results. The proposed solution lays the basis for the development of an autonomous method of TMJ index identification.

Determination of collapse moment of different angled pipe bends with initial geometric imperfection subjected to in-plane bending moments

2021 ◽  
pp. 095440622199640
Author(s):  
Manish Kumar ◽  
Pronab Roy ◽  
Kallol Khan
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Circular Cross Section ◽  
Initial Imperfection ◽  
Bend Angle ◽  
Bending Moments ◽  
Element Analysis ◽  
Geometric Imperfection ◽  
Initial Geometric Imperfection

From the recent literature, it is revealed that pipe bend geometry deviates from the circular cross-section due to pipe bending process for any bend angle, and this deviation in the cross-section is defined as the initial geometric imperfection. This paper focuses on the determination of collapse moment of different angled pipe bends incorporated with initial geometric imperfection subjected to in-plane closing and opening bending moments. The three-dimensional finite element analysis is accounted for geometric as well as material nonlinearities. Python scripting is implemented for modeling the pipe bends with initial geometry imperfection. The twice-elastic-slope method is adopted to determine the collapse moments. From the results, it is observed that initial imperfection has significant impact on the collapse moment of pipe bends. It can be concluded that the effect of initial imperfection decreases with the decrease in bend angle from 150∘ to 45∘. Based on the finite element results, a simple collapse moment equation is proposed to predict the collapse moment for more accurate cross-section of the different angled pipe bends.

Sign in / Sign up

Export Citation Format

Share Document