scholarly journals Development and Validation of UV Spectrophotometric Method for Determination of Eletriptan HBr

2020 ◽  
Vol 10 (01) ◽  
pp. 69-72
Author(s):  
Shoaeb Mohammad Syed ◽  
R.P. Marathe ◽  
P.R. Mahaparale
Keyword(s):  
Spectrophotometric Method ◽  
Development And Validation

scholarly journals Oxcarbazepine: validation and application of an analytical method

2010 ◽  
Vol 46 (2) ◽  
pp. 265-272 ◽  
Author(s):  
Paula Cristina Rezende Enéas ◽  
Renata Barbosa de Oliveira ◽  
Gerson Antônio Pianetti
Keyword(s):  
Spectrophotometric Method ◽  
Analytical Method ◽  
Disintegration Time ◽  
International Conference ◽  
Pharmacopoeial Monograph ◽  
Development And Validation ◽  
Excipient Compatibility

Oxcarbazepine (OXC) is an important anticonvulsant and mood stabilizing drug. A pharmacopoeial monograph for OXC is not yet available and therefore the development and validation of a new analytical method for quantification of this drug is essential. In the present study, a UV spectrophotometric method for the determination of OXC was developed. The various parameters, such as linearity, precision, accuracy and specificity, were studied according to International Conference on Harmonization Guidelines. Batches of 150 mg OXC capsules were prepared and analyzed using the validated UV method. The formulations were also evaluated for parameters including drug-excipient compatibility, flowability, uniformity of weight, disintegration time, assay, uniformity of content and the amount of drug dissolved during the first hour.

scholarly journals Development and Validation of UV Spectrophotometric Method for the Determination of Cefuroxime Axetil in Bulk and Pharmaceutical Formulation

2013 ◽  
Vol 6 (1) ◽  
pp. 133-141 ◽  
Author(s):  
S. Binte Amir ◽  
M. A. Hossain ◽  
M. A. Mazid
Keyword(s):  
Spectrophotometric Method ◽  
Cost Effective ◽  
Cefuroxime Axetil ◽  
Pharmaceutical Formulation ◽  
Uv Spectrum ◽  
Accuracy And Precision ◽  
Relative Standard ◽  
Label Claim ◽  
Development And Validation

The present study was undertaken to develop and validate a simple, sensitive, accurate, precise and reproducible UV spectrophotometric method for cefuroxime axetil using methanol as solvent. In this method the simple UV spectrum of cefuroxime axetil in methanol was obtained which exhibits absorption maxima (?max) at 278 nm. The quantitative determination of the drug was carried out at 278 nm and Beer’s law was obeyed in the range of (0.80-3.60) µg/ml. The proposed method was applied to pharmaceutical formulation and percent amount of drug estimated (95.6% and 96%) was found in good agreement with the label claim. The developed method was successfully validated with respect to linearity, specificity, accuracy and precision. The method was shown linear in the mentioned concentrations having line equation y = 0.05x + 0.048 with correlation coefficient of 0.995. The recovery values for cefuroxime axetil ranged from 99.85-100.05. The relative standard deviation of six replicates of assay was less than 2%. The percent relative standard deviations of inter-day precision ranged between 1.45-1.92% and intra-day precision of cefuroxime axetil was 0.96-1.51%. Hence, proposed method was precise, accurate and cost effective.  Keywords: UV-Vis spectrophotometer; Method validation; Cefuroxime axetil; Recovery studies.  © 2013 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved.   doi: http://dx.doi.org/10.3329/jsr.v6i1.14879 J. Sci. Res. 6 (1), 133-141 (2013)  

scholarly journals DEVELOPMENT AND VALIDATION OF UV-SPECTROPHOTOMETRIC METHOD FOR ESTIMATION OF HYDROQUINONE IN BULK, MARKETED CREAM AND PREAPARED NLC FORMULATION

2017 ◽  
Vol 9 (5) ◽  
pp. 102
Author(s):  
Sukhjinder Kaur ◽  
Taranjit Kaur ◽  
Gurdeep Kaur ◽  
Shivani Verma
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Pure Form ◽  
Nanostructured Lipid Carrier ◽  
Limit Of Quantification ◽  
Double Beam ◽  
Uv Visible ◽  
Development And Validation

Objective: The aim of the present work was to develop a simple, rapid, accurate and economical UV-visible spectrophotometric method for the determination of hydroquinone (HQ) in its pure form, marketed formulation as well as in the prepared nanostructured lipid carrier (NLC) systems and to validate the developed method.Methods: HQ was estimated at UV maxima of 289.6 nm in pH 5.5 phosphate buffer using UV-Visible double beam spectrophotometer. Following the guidelines of the International Conference on Harmonization (ICH), the method was validated for various analytical parameters like linearity, precision, and accuracy robustness, ruggedness, limit of detection, quantification limit, and formulation analysis.Results: The obtained results of the analysis were validated statistically. Recovery studies were performed to confirm the accuracy of the proposed method. In the developed method, linearity over the concentration range of 5-40 μg/ml of HQ was observed with the correlation coefficient of 0.998 and found in good agreement with Beer Lambert’s law. The precision (intra-day and inter-day) of the method was found within official RCD limits (RSD<2%).Conclusion: The sensitivity of the method was assessed by determining the limit of detection and limit of quantification. It could be concluded from the results obtained that the purposed method for estimation of HQ in pure form, in the marketed ointment and in the prepared NLC-formulation was simple, rapid, accurate, precise and economical. It can be used successfully in the quality control of pharmaceutical formulations and for the routine laboratory analysis.

scholarly journals Development and validation of spectrophotometric method for phenylephrine hydrochloride estimation in nasal drops formulations

2008 ◽  
Vol 27 (2) ◽  
pp. 149 ◽  
Author(s):  
Ivana Savić ◽  
Goran Nikolić ◽  
Vladimir Banković
Keyword(s):  
Standard Deviation ◽  
Sodium Hydroxide ◽  
Relative Standard Deviation ◽  
Spectrophotometric Method ◽  
Molar Absorptivity ◽  
Dosage Forms ◽  
Phenylephrine Hydrochloride ◽  
Relative Standard ◽  
Development And Validation

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

DEVELOPMENT AND VALIDATION OF UV-SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF SELEGILINE HYDROCHLORIDE LOADED SOLID LIPID NANOPARTICLES

INDIAN DRUGS ◽  
2019 ◽  
Vol 56 (08) ◽  
pp. 57-60
Author(s):  
J. B Prajapati ◽  
H Rao ◽  
H Shah ◽  
Keyword(s):  
Correlation Coefficient ◽  
Spectrophotometric Method ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Laboratory Scale ◽  
Solid Lipid ◽  
Ich Guidelines ◽  
Development And Validation

The present paper discusses about a simple, precise and validated method for the determination of selegiline loaded solid lipid nanoparticles. The study was carried as per the parameters laid down in ICH guidelines. Maximum wavelength of selegiline in 8:2 methanol: chloroform mixture was selected at 258nm. The method was found to be linear in the range of 200μg/mL to 1000μg/mL with correlation coefficient R2 of 0.994. Method was successfully validating as per ICH guidelines. Moreover, this method was simple, sensitive and easy to apply and can be performed at laboratory scale. Hence, the proposed method can be used for analysis of determination of selegiline loaded solid lipid nanoparticles.

scholarly journals DEVELOPMENT AND VALIDATION OF UV-VISIBLE SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF DULOXETINE

2019 ◽  
pp. 27-31
Author(s):  
LIPSA SAMAL ◽  
AMARESH PRUSTY
Keyword(s):  
Spectrophotometric Method ◽  
Spectroscopic Method ◽  
Solvent System ◽  
Spectrophotometric Analysis ◽  
Thiophene Derivative ◽  
Experimental Conditions ◽  
Relative Standard ◽  
Uv Visible ◽  
Development And Validation

Objective: The aim of the present work was to develop and validate a simple UV spectroscopic method for the determination of duloxetine, which is a thiophene derivative and a selective neurotransmitter reuptake inhibitor for serotonin, norepinephrine, and to lesser degree dopamine. Methods: The UV Spectrophotometric analysis was performed using Shimadzu UV-1800 and Shimadzu UV-1700 spectrophotometer by using solvent system acetonitrile and water in the ratio of 8:2. Detection was performed at a wavelength of 290 nm. Method validation was carried out according to ICH Q2R1 guidelines by taking the parameters linearity, accuracy, precision, ruggedness, and robustness, LOD and LOQ. Results: The UV Spectrophotometric method was found linear in the range of 10-50 μg/ml. The method was rugged and robust with % relative standard deviation less than 2. The extraction recoveries were found to be higher than 99% in all experimental conditions. Conclusion: Based upon the performance characteristics, the proposed method was found accurate, precise and rapid and suitable for the determination of Duloxetine for routine analysis.

scholarly journals DEVELOPMENT AND VALIDATION OF ULTRAVIOLET-SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF FEBUXOSTAT FOR CONDUCTING IN-VITRO QUALITY CONTROL TESTS IN BULK AND PHARMACEUTICAL DOSAGE FORMS

2018 ◽  
Vol 11 (9) ◽  
pp. 115
Author(s):  
Jaspreet Kaur ◽  
Daljit Kaur ◽  
Sukhmeet Singh
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Dosage Forms ◽  
Pharmaceutical Dosage Forms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Development And Validation

Objective: A simple, accurate, and selective ultraviolet-spectrophotometric method has been developed for the estimation of febuxostat in the bulk and pharmaceutical dosage forms.Method: The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines. The developed method was validated statistically with respect to linearity, range, precision, accuracy, ruggedness, limit of detection (LOD), limit of quantitation (LOQ), and recovery. Specificity of the method was demonstrated by applying different stressed conditions to drug samples such as acid hydrolysis, alkaline hydrolysis, oxidative, photolytic, and thermal degradation.Results: The study was conducted using phosphate buffer pH 6.8 and λmax was found to be 312 nm. Standard plot having a concentration range of 1–10 μg/ml showed a good linear relationship with R2=0.999. The LOD and LOQ were found to be 0.118 μg/ml and 0.595 μg/ml, respectively. Recovery and percentage relative standard deviations were found to be 100.157±0.332% and <2%, respectively.Conclusion: Proposed method was successfully applicable to the pharmaceutical formulations containing febuxostat. Thus, the developed method is found to be simple, sensitive, accurate, precise, reproducible, and economical for the determination of febuxostat in pharmaceutical dosage forms.

scholarly journals VISIBLE SPECTROPHOTOMETRIC METHOD DEVELOPMENT AND VALIDATION OF IMATINIB IN BULK AND FORMULATION

2020 ◽  
pp. 63-67
Author(s):  
SMITA KUMBHAR ◽  
VINOD MATOLE ◽  
YOGESH THORAT ◽  
ANITA SHEGAONKAR ◽  
AVINASH HOSMANI
Keyword(s):  
Spectrophotometric Method ◽  
Method Development ◽  
Pharmaceutical Formulations ◽  
Uv Spectrum ◽  
Colored Complex ◽  
Pharmaceutical Dosage Forms ◽  
Highly Sensitive ◽  
Method Development And Validation ◽  
Development And Validation

Objective: A new, simple, sensitive, precise and reproducible UV visible spectrophotometric method was developed for the determination of Imatinib in pharmaceutical formulations with alizarin. Methods: The method is based on formation of yellow-colored complex. The UV spectrum of Imatinib in methanol showed λ max at 431 nm. Beer’s law is valid in the concentration range of 10-70 μg/ml. This method was validated for linearity, accuracy, precision, ruggedness and robustness. Results: The method has demonstrated excellent linearity over the range of 10-70 μg/ml with regression equation y =0.013x-0.017 and regression correlation coefficient r2= 0.997. Moreover, the method was found to be highly sensitive with LOD (4.3μg/ml) and LOQ (13.07μg/ml). Conclusion: Based on results the proposed method can be successfully applied for the assay of Imatinib in various pharmaceutical dosage forms.

Sign in / Sign up

Export Citation Format

Share Document