scholarly journals Simulation of the motion of a propellerless mobile robot controlled by rotation of the internal rotor

2020 ◽  
Vol 30 (4) ◽  
pp. 645-656
Author(s):  
A.V. Klekovkin
Keyword(s):  
Mobile Robot ◽  
Equations Of Motion ◽  
Viscous Friction ◽  
Control Action ◽  
Model Parameters ◽  
Kirchhoff Equations ◽  
Internal Rotor ◽  
Symmetric Shape

We consider a propellerless robot that moves on the surface of a fluid by rotating of the internal rotor. The robot shell has a symmetric shape of NACA 0040 airfoil. The equations of motion are written in the form of classical Kirchhoff equations with terms describing the viscous friction. The control action based on the derived model is proposed. The influences of various model parameters on the robot's trajectory have been studied.

Model of vortex flow of charge in a vessel with turbine impeller

1987 ◽  
Vol 52 (8) ◽  
pp. 1888-1904
Author(s):  
Miloslav Hošťálek ◽  
Ivan Fořt
Keyword(s):  
Boundary Conditions ◽  
Equations Of Motion ◽  
Theoretical Data ◽  
Eddy Diffusion ◽  
Quantitative Agreement ◽  
Creeping Flow ◽  
Model Parameters ◽  
Mean Flow ◽  
Two Dimensional Flow ◽  
Vorticity Transport

A theoretical model is described of the mean two-dimensional flow of homogeneous charge in a flat-bottomed cylindrical tank with radial baffles and six-blade turbine disc impeller. The model starts from the concept of vorticity transport in the bulk of vortex liquid flow through the mechanism of eddy diffusion characterized by a constant value of turbulent (eddy) viscosity. The result of solution of the equation which is analogous to the Stokes simplification of equations of motion for creeping flow is the description of field of the stream function and of the axial and radial velocity components of mean flow in the whole charge. The results of modelling are compared with the experimental and theoretical data published by different authors, a good qualitative and quantitative agreement being stated. Advantage of the model proposed is a very simple schematization of the system volume necessary to introduce the boundary conditions (only the parts above the impeller plane of symmetry and below it are distinguished), the explicit character of the model with respect to the model parameters (model lucidity, low demands on the capacity of computer), and, in the end, the possibility to modify the given model by changing boundary conditions even for another agitating set-up with radially-axial character of flow.

scholarly journals Motion Planning and Control of an Omnidirectional Mobile Robot in Dynamic Environments

Robotics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 48
Author(s):  
Mahmood Reza Azizi ◽  
Alireza Rastegarpanah ◽  
Rustam Stolkin
Keyword(s):  
Mobile Robot ◽  
Collision Avoidance ◽  
Motion Control ◽  
Equations Of Motion ◽  
Dynamic Environments ◽  
Discrete State ◽  
Omnidirectional Mobile Robot ◽  
Planning And Control ◽  
Avoidance Strategy ◽  
And Performance

Motion control in dynamic environments is one of the most important problems in using mobile robots in collaboration with humans and other robots. In this paper, the motion control of a four-Mecanum-wheeled omnidirectional mobile robot (OMR) in dynamic environments is studied. The robot’s differential equations of motion are extracted using Kane’s method and converted to discrete state space form. A nonlinear model predictive control (NMPC) strategy is designed based on the derived mathematical model to stabilize the robot in desired positions and orientations. As a main contribution of this work, the velocity obstacles (VO) approach is reformulated to be introduced in the NMPC system to avoid the robot from collision with moving and fixed obstacles online. Considering the robot’s physical restrictions, the parameters and functions used in the designed control system and collision avoidance strategy are determined through stability and performance analysis and some criteria are established for calculating the best values of these parameters. The effectiveness of the proposed controller and collision avoidance strategy is evaluated through a series of computer simulations. The simulation results show that the proposed strategy is efficient in stabilizing the robot in the desired configuration and in avoiding collision with obstacles, even in narrow spaces and with complicated arrangements of obstacles.

scholarly journals Developments in Modelling Bone Screwing

2020 ◽  
Vol 6 (3) ◽  
pp. 111-114
Author(s):  
Jack Wilkie ◽  
Paul D. Docherty ◽  
Knut Möller
Keyword(s):  
Material Properties ◽  
Frictional Coefficient ◽  
Viscous Friction ◽  
Model Parameters ◽  
General Shape ◽  
Bone Material ◽  
Bone Material Properties ◽  
Modelling Methodology ◽  
Recorded Data ◽  
Friction Models

AbstractINTRODUCTION: A torque-rotation model of the bone-screwing process has been proposed. Identification of model parameters using recorded data could potentially be used to determine the material properties of bone. These properties can then be used to recommend tightening torques to avoid over or under-tightening of bone screws. This paper improves an existing model to formulate it in terms of material properties and remove some assumptions. METHOD: The modelling methodology considers a critical torque, which is required to overcome friction and advance the screw into the bone. Below this torque the screw may rotate with elastic deformation of the bone tissue, and above this the screw moves relative to the bone, and the speed is governed by a speed-torque model of the operator’s hand. The model is formulated in terms of elastic modulus, ultimite tensile strength, and frictional coefficient of the bone and the geometry of the screw and hole. RESULTS: The model output shows the speed decreasing and torque increasing as the screw advances into the bone, due to increasing resistance. The general shape of the torque and speed follow the input effort. Compared with the existing model, this model removes the assumption of viscous friction, models the increase in friction as the screw advances into the bone, and is directly in terms of the bone material properties. CONCLUSION: The model presented makes significant improvements on the existing model. However it is intended for use in parameter identification, which was not evaluated here. Further simulation and experimental validation is required to establish the accuracy and fitness of this model for identifying bone material properties.

scholarly journals Study on Friction in Automotive Shock Absorbers Part 1: Friction Simulation Using a Dynamic Friction Model in the Contact Zone of an FEM Model

Vehicles ◽  
2021 ◽  
Vol 3 (2) ◽  
pp. 212-232
Author(s):  
Ludwig Herzog ◽  
Klaus Augsburg
Keyword(s):  
Ride Comfort ◽  
Viscous Friction ◽  
Simulation Method ◽  
Friction Model ◽  
Model Parameters ◽  
Dynamic Friction ◽  
Friction Modeling ◽  
Shock Absorbers ◽  
Operation Conditions ◽  
Wide Range

The important change in the transition from partial to high automation is that a vehicle can drive autonomously, without active human involvement. This fact increases the current requirements regarding ride comfort and dictates new challenges for automotive shock absorbers. There exist two common types of automotive shock absorber with two friction types: The intended viscous friction dissipates the chassis vibrations, while the unwanted solid body friction is generated by the rubbing of the damper’s seals and guides during actuation. The latter so-called static friction impairs ride comfort and demands appropriate friction modeling for the control of adaptive or active suspension systems. In this article, a simulation approach is introduced to model damper friction based on the most friction-relevant parameters. Since damper friction is highly dependent on geometry, which can vary widely, three-dimensional (3D) structural FEM is used to determine the deformations of the damper parts resulting from mounting and varying operation conditions. In the respective contact zones, a dynamic friction model is applied and parameterized based on the single friction point measurements. Subsequent to the parameterization of the overall friction model with geometry data, operation conditions, material properties and friction model parameters, single friction point simulations are performed, analyzed and validated against single friction point measurements. It is shown that this simulation method allows for friction prediction with high accuracy. Consequently, its application enables a wide range of parameters relevant to damper friction to be investigated with significantly increased development efficiency.

Motion Model of Two-Wheel Differential Drive Mobile Robot under Variable Load

2014 ◽  
Vol 668-669 ◽  
pp. 352-356 ◽  
Author(s):  
Zhi Hu Ruan ◽  
Niu Wang ◽  
Bing Xin Ran
Keyword(s):  
Mobile Robot ◽  
State Space Model ◽  
Response Characteristic ◽  
Model Parameters ◽  
Variable Load ◽  
Motion Model ◽  
Actual System ◽  
Wheel Load ◽  
Differential Drive ◽  
Entire Vehicle

Based on kinematics characteristic of two-wheeled differential drive mobile robot (WMR) and response characteristic of fact motor drive system, this paper presents the analysis method of the equivalent rotation inertia, and the entire vehicle load is assigned to each wheel, and then the wheel load is converted into the corresponding equivalent rotation inertia of the motor shaft of each wheel, and motion model of WMR are obtained for combining with quasi-equivalent (QE) state space model of double-loop direct current motor systems under variable load and kinematics model of WMR under the load changes. By using speed response data of the actual system and combining with genetic algorithm to accurately identify the model parameters. Finally, through experiments results of the WMR motion model and the second order model respectively comparing with the actual system which demonstrates the effectiveness of the proposing method and model.

Integration of Multibody System Dynamics With Sliding Mode Control Using FPGA Technique for Trajectory Tracking Problems

2018 ◽  
Author(s):  
Ayman A. Nada ◽  
Abdullateef H. Bashiri
Keyword(s):  
Sliding Mode Control ◽  
Mobile Robot ◽  
Control Systems ◽  
Trajectory Tracking ◽  
Sliding Mode ◽  
Integrated Control ◽  
Equations Of Motion ◽  
Multiple Input Multiple Output ◽  
Control Law ◽  
Mode Control

Trajectory tracking robotic systems require complex control procedures that occupy less space and need less energy. For these reasons, the development of computerized and integrated control systems is crucial. Recently, developing reconfigurable Field Programmable Gate Arrays (FPGAs) give a prominence of the complete robotic control systems. Furthermore, it has been found in the literature that the model-based control methods are most efficient and cost-effective. This model must interpret how multiple moving parts interact with each other and with their environment. On the other hand, MultiBody Dynamic (MBD) approach is considered to solve these difficulties to attain the models accurately. However, the obtained equations of motion do not match the well-developed forms of control theory. In this paper, the MBD model of a mobile robot is established; and the equations of motion are reshaped into their control canonical form. Additionally, the Sliding Mode Control (SMC) theory is used to design the control law. The constraints’ manifold, which is available in the equations of the MBD system, are imposed systematically as the switching surface. SMC is applied because of its ability to address multiple-input/multiple-output nonlinear systems without resorting any approximations. Eventually, the experimental verification of the proposed algorithm is carried out using DaNI mobile robot in which, a Reconfigurable Input/Output (RIO) board is used to reorient the control design, so that can fit the required trajectory. The control law is implemented using LabVIEW software and NI-sbRIO-9631 with acceptable performance. It is obvious that the integration of MBD/SMC/FPGA can be used successfully to develop embedded systems for the applications of trajectory tracking robotics.

scholarly journals Battery state of charge estimation and online wheel slip ratio control for autonomous wheeled mobile robot

2021 ◽  
Author(s):  
Maral Partovibakhsh
Keyword(s):  
Kalman Filter ◽  
Power Consumption ◽  
Mobile Robot ◽  
Unscented Kalman Filter ◽  
Longitudinal Velocity ◽  
Accurate Estimation ◽  
Model Parameters ◽  
Slip Ratio ◽  
Soc Estimation ◽  
Increasing Function

For autonomous mobile robots moving in unknown environment, accurate estimation of available power along with the robot power demand for each mission is paramount to successful completion of that mission. Regarding the power consumption, the control unit deals with two tasks simultaneously: 1) it has to monitor the power supply (batteries) state of charge (SoC) constantly. This leads to estimation of robot current available power. Besides, batteries are sensitive to deep discharge or overcharge. The battery SoC is an essential factor in power management of a mobile robot. Accurate estimation of the battery SoC can improve power management, optimize the performance, extend the lifetime, and prevent permanent damage to the batteries. 2) The dynamic characteristics of the terrain the robot traverse requires rapid online modifications in its behaviour. The power required for driving a wheel is an increasing function of its slip ratio. For a wheeled robot moving for driving a wheel is an increasing function of its slip ratio. For a wheeled robot moving on different terrains, slip of the wheels should be checked and compensated for to keep the robot moving with less power consumption. To reduce the power consumption, the target robot moving with less power consumption. To reduce the power consumption, the target of the control system is to keep the slip ratio of the driving wheels around the desired value of the control system is to keep the slip ratio of the driving wheels around the desired value. To fulfill the above mentioned tasks, in this thesis, to increase model validity of lithium-ion battery in various charge/discharge scenarios during the mobile robot operation, the battery capacity fade and internal resistance change are modeled by adding them as state variables to a state space model. Using the output measured data, adaptive unscented Kalman Filter (AUKF) is employed for online model parameters identification of the equivalent circuit model at each sampling time. Subsequently, based on the updated model parameters, SoC estimation is conducted using AUKF. The effectiveness of the proposed method is verified through experiments under different power duties in the lab environment through experiments under different power duties in the lab environment. Better results are obtained both in battery model parameters estimation and the battery SoC estimation in comparison with other Kalman filter extensions. Furthermore, for effective control of the slip ratio, a model-based approach to estimating the longitudinal velocity of the mobile robot is presented. The AUKF is developed to estimate the vehicle longitudinal velocity and the wheel angular velocity using measurements from wheel encoders. Based on the estimated slip ratio, a sliding mode controller is designed for slip control of the uncertain nonlinear dynamical system in the presence of model uncertainties, parameter variations, and disturbances. Experiments are carried out in real time on a four-wheel mobile robot to verify the effectiveness of the estimation algorithm and the controller. It is shown that the controller is able to control the slip ratio of the mobile robot on different terrains while adaptive concept of AUKF leads to better results than the unscented Kalman filter in estimating the vehicle velocity which is difficult to measure in actual practice.

scholarly journals Adaptive Visually Servoed Tracking Control for Wheeled Mobile Robot with Uncertain Model Parameters in Complex Environment

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Fujie Wang ◽  
Yi Qin ◽  
Fang Guo ◽  
Bin Ren ◽  
John T. W. Yeow
Keyword(s):  
Mobile Robot ◽  
Visual Servoing ◽  
Dynamic Control ◽  
Kinematic Model ◽  
Image Plane ◽  
Adaptive Controller ◽  
Wheeled Mobile Robot ◽  
General Situation ◽  
Model Parameters ◽  
Complex Environment

This paper investigates the stabilization and trajectory tracking problem of wheeled mobile robot with a ceiling-mounted camera in complex environment. First, an adaptive visual servoing controller is proposed based on the uncalibrated kinematic model due to the complex operation environment. Then, an adaptive controller is derived to provide a solution of uncertain dynamic control for a wheeled mobile robot subject to parametric uncertainties. Furthermore, the proposed controllers can be applied to a more general situation where the parallelism requirement between the image plane and operation plane is no more needed. The overparameterization of regressor matrices is avoided by exploring the structure of the camera-robot system, and thus, the computational complexity of the controller can be simplified. The Lyapunov method is employed to testify the stability of a closed-loop system. Finally, simulation results are presented to demonstrate the performance of the suggested control.

Dynamics of the Planetary Roller Screw Mechanism

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
Matthew H. Jones ◽  
Steven A. Velinsky ◽  
Ty A. Lasky
Keyword(s):  
Steady State ◽  
Slip Velocity ◽  
Equations Of Motion ◽  
Viscous Friction ◽  
Contact Angles ◽  
Dynamic Equations ◽  
Roller Screw ◽  
Angular Velocities ◽  
Screw Mechanism ◽  
Lagrange’S Method

This paper develops the dynamic equations of motion for the planetary roller screw mechanism (PRSM) accounting for the screw, rollers, and nut bodies. First, the linear and angular velocities and accelerations of the components are derived. Then, their angular momentums are presented. Next, the slip velocities at the contacts are derived in order to determine the direction of the forces of friction. The equations of motion are derived through the use of Lagrange's Method with viscous friction. The steady-state angular velocities and screw/roller slip velocities are also derived. An example demonstrates the magnitude of the slip velocity of the PRSM as a function of both the screw lead and the screw and nut contact angles. By allowing full dynamic simulation, the developed analysis can be used for much improved PRSM system design.

A Nonlinear Shear Deformable Nanoplate Model Including Surface Effects for Large Amplitude Vibrations of Rectangular Nanoplates with Various Boundary Conditions

2015 ◽  
Vol 07 (05) ◽  
pp. 1550076 ◽  
Author(s):  
Reza Ansari ◽  
Mostafa Faghih Shojaei ◽  
Vahid Mohammadi ◽  
Raheb Gholami ◽  
Mohammad Ali Darabi
Keyword(s):  
Boundary Conditions ◽  
Surface Stress ◽  
Equations Of Motion ◽  
Continuation Method ◽  
Free Vibrations ◽  
Model Parameters ◽  
Geometrically Nonlinear ◽  
Residual Surface Stress ◽  
Various Boundary Conditions ◽  
Shear Deformable

In this paper, a geometrically nonlinear first-order shear deformable nanoplate model is developed to investigate the size-dependent geometrically nonlinear free vibrations of rectangular nanoplates considering surface stress effects. For this purpose, according to the Gurtin–Murdoch elasticity theory and Hamilton's principle, the governing equations of motion and associated boundary conditions of nanoplates are derived first. Afterwards, the set of obtained nonlinear equations is discretized using the generalized differential quadrature (GDQ) method and then solved by a numerical Galerkin scheme and pseudo arc-length continuation method. Finally, the effects of important model parameters including surface elastic modulus, residual surface stress, surface density, thickness and boundary conditions on the vibration characteristics of rectangular nanoplates are thoroughly investigated. It is found that with the increase of the thickness, nanoplates can experience different vibrational behavior depending on the type of boundary conditions.

Sign in / Sign up

Export Citation Format

Share Document