scholarly journals The effect of raw material combination, yarn count, fabric structure and looplength on the thermal properties of Eri silk bi-layer knitted fabrics

2021 ◽  
Vol 72 (03) ◽  
pp. 331-339
Author(s):  
SATHISH T. KUMAR ◽  
RAMESH M. KUMAR ◽  
SENTHIL B. KUMAR
Keyword(s):  
Raw Material ◽  
Knitted Fabric ◽  
Knitted Fabrics ◽  
The North ◽  
Fabric Structure ◽  
North Eastern ◽  
Yarn Count ◽  
Comfort Property ◽  
Eri Silk ◽  
Silk Yarn

Eri silk is one of the wild silk varieties which are mainly available in the north-eastern areas of India. It exhibits goodmechanical and thermal resistance properties. In this concern, the present study focused to develop a bi-layer knittedstructure made from Eri silk yarn as one side(next to skin) and on another side bamboo yarn knitted fabric. Similarly,Tencel knitted fabric was used instead of bamboo. Twenty-four bi-layer knitted fabrics were developed and thenanalysed for its thermal comfort property. The air permeability, and wick-ability were found to be higher and the thermalresistance was found to be higher for bi-layer plated interlocked knitted fabric made out of Eri silk compared to bambooand Tencel.

scholarly journals An Investigation On Air and Thermal Transmission Through Knitted Fabric Structures Using the Taguchi Method

2017 ◽  
Vol 17 (2) ◽  
pp. 152-163 ◽  
Author(s):  
Anindya Ghosh ◽  
Prithwiraj Mal ◽  
Abhijit Majumdar ◽  
Debamalya Banerjee
Keyword(s):  
Air Permeability ◽  
Raw Material ◽  
Knitted Fabric ◽  
Loop Length ◽  
Knitted Fabrics ◽  
Yarn Count ◽  
Fabric Structures ◽  
Noise Factors ◽  
Single Jersey ◽  
Thermal Absorptivity

Abstract Knitted fabrics have excellent comfort properties because of their typical porous structure. Different comfort properties of knitted fabrics such as air permeability, thermal absorptivity, and thermal conductivity depend on the properties of raw material and knitting parameters. In this paper, an investigation was done to observe the effect of yarn count, loop length, knitting speed, and yarn input tension in the presence of two uncontrollable noise factors on selected comfort properties of single jersey and 1×1 rib knitted fabrics using the Taguchi experimental design. The results show that yarn count and loop length have significant influence on the thermo-physiological comfort properties of knitted fabrics.

Analyzing the Effect of Fiber, Yarn and Fabric Variables on Bagging Behavior of Single Jersey Weft Knitted Fabrics

2013 ◽  
Vol 8 (3) ◽  
pp. 155892501300800 ◽  
Author(s):  
Mitra Karimian ◽  
Hossein Hasani ◽  
Saeed Ajeli
Keyword(s):  
Optimum Process ◽  
Process Conditions ◽  
Knitted Fabrics ◽  
Yarn Twist ◽  
Fabric Density ◽  
Fabric Structure ◽  
Controllable Factors ◽  
Yarn Count ◽  
The Individual ◽  
Single Jersey

This research investigates the effect of fiber, yarn and fabric variables on the bagging behavior of single jersey weft knitted fabrics interpreted in terms of bagging fatigue percentage. In order to estimate the optimum process conditions and to examine the individual effects of each controllable factor on a particular response, Taguchi's experimental design was used. The controllable factors considered in this research are blending ratio, yarn twist and count, fabric structure and fabric density. The findings show that fabric structure has the largest effect on the fabric bagging. Factor yarn twist is second and is followed by fabric density, blend ratio and yarn count. The optimum conditions to achieve the least bagging fatigue ratio were determined.

scholarly journals Organizational and technological features of the use of wood raw material obtained from intermediate felling in the beech forests of the Greater Caucasus

2015 ◽  
Vol 5 (1) ◽  
pp. 197-206
Author(s):  
Яхьяев ◽  
Aydyn Yakhyaev ◽  
Абиев ◽  
Yusif Abiev
Keyword(s):  
Raw Materials ◽  
Forest Products ◽  
Raw Material ◽  
Industrial Complex ◽  
Resource Base ◽  
Timber Industry ◽  
Greater Caucasus ◽  
The North ◽  
Chip Technology ◽  
North Eastern

In the farms of the north-eastern slope of the Greater Caucasus wood raw material obtained from intermediate felling, is not fully utilized and is not effective, due to the organizational and technical difficulties of farms. In addressing these issues in 8 directions of the region with a length of 40-50 km 14 intermediate assembly points were organized, which are intended for the collection and temporary storage of wood raw material harvested within a radius of 15-20 km of the forest. Need to establish assembly points is due to the complexity of relief items and the possibility of year-round use of the main roads of regional importance. To ensure uninterrupted timber industry and in full at the assembly point accumulated wood raw material is partially sorted. Processing of harvested wood raw material is planned for timber industry, located near the central region of the main road in the territory of Cuba town. Establishment in the area of the complex is considered justified, since the resource base in the coming years for intermediate, and later for the main use will be more than 100 thousand hectares of forests in the region. In the proposed area for the industrial complex for processing of raw wood there are all the technical and economic prerequisites. Accumulated in the assembly points wood raw material to the point of processing is transported using self-loading lumber carriers of up to 8 meters length, which is associated with a complex terrain conditions and road network in the region. This complex is planned to organize the following process areas: sawmills, parquet and packaging, small-chip technology, processing of technical greenery. In organizing the production sites size and quality characteristics and volumes of each category of harvested wood raw materials are taking into account, as well as the need for forest products in the region and the country as a whole. In the processes it is envisaged to use the most advanced modular processing of wood with the release of standard lumber, wood workpieces of different products, pulp chips, wood greens and products of its processing.

Shear Properties of Wool Plain-Knitted Fabrics

1976 ◽  
Vol 46 (4) ◽  
pp. 265-272 ◽  
Author(s):  
R. J. Hamilton ◽  
R. Postle
Keyword(s):  
Shear Force ◽  
Hysteresis Loops ◽  
Shear Behaviour ◽  
Knitted Fabric ◽  
Shear Rigidity ◽  
Knitted Fabrics ◽  
Fabric Structure ◽  
Applied Tension ◽  
Constant Tension ◽  
Applied Relaxation

An instrument is described for the measurement of shear in knitted fabrics under conditions of constant tension and “equal length of side.” Shear hysteresis loops were obtained for a series of wool plain-knitted fabrics of different tightness factors. Typical curves and fabric parameters (shear rigidity and coercive shear force) are presented for the fabrics tested in two states of relaxation using several values of applied tension. The results have been analyzed statistically and a simple friction-elastic rheological model of the shear behaviour is examined. This model is interpreted in terms of the knitted fabric structure and the changes that occur when a shear deformation is applied. Relaxation was found to reduce the values of both the shear rigidity and the coercive shear force. The effect of tension was investigated, and suitable levels of tension are recommended for testing knitted fabrics in shear.

Investigation of the Two-Bar Warp-Knitted Fabric Structure Effect on Luster Value

2014 ◽  
Vol 9 (2) ◽  
pp. 155892501400900
Author(s):  
Saeed Ajeli ◽  
Zoleykhah Ahmadvand
Keyword(s):  
Diffuse Reflection ◽  
Specular Reflection ◽  
Knitted Fabric ◽  
Knitted Fabrics ◽  
Fabric Structure ◽  
Measuring Surface ◽  
Before And After ◽  
Dark Color ◽  
Points Of View ◽  
Warp Knitted Fabric

Consumer points of view determine economical value of fabrics. Fabric luster plays a momentous role in attracting people's attention, especially for clothing and domestic purposes. Luster is defined by intensity of both specular and diffuse light reflection off of a surface. There are various methods for measuring surface luster. Gloss. Luster is described as the ratio of specular reflection in one angle to diffuse reflection in another angle. Two-bar warp knitted polyester fabrics such as Tricot, Locknit, Satin, reverse Locknit and Sharkskin in three different densities were provided. A mini gloss apparatus was applied to measure fabric specular reflection in the angle of sixty degrees, before and after disperse dying with different colors of white, blue and yellow. Results suggest that luster is a function of knitted fabric type, color and density. Enhancement of technical back luster resulted from longer underlap of the front bar. However, it did not change the technical face luster significantly. Density increased in all knitted fabrics and caused the luster to decrease. Dark color fabrics showed lower luster compared to light ones.

Effect of Dyeing and Finishing Process on Anti-Ultraviolet Properties of PA6 Knitted Fabric

2013 ◽  
Vol 785-786 ◽  
pp. 651-655
Author(s):  
Wen Qin Du ◽  
Xiao Liang liu ◽  
Xin Chen
Keyword(s):  
Raw Material ◽  
Knitted Fabric ◽  
Concentration Increase ◽  
Knitted Fabrics ◽  
Finishing Process ◽  
Higher Temperature

This experiment used PA6 anti-ultraviolet properties fabric which specifications were adding a content of 0.3% nanomaterial 70D/24F SD DTY and adding a content of 0.7% nanomaterial 70D/48F SD DTY as raw material. After weaving, we analysis the influence on dye concentration and postboarding process for anti-ultraviolet properties of PA6 knitted fabrics. The result shows that the more dye concentration increase, the better anti-ultraviolet properties of fabric raise and the higher temperature or the slower speed of the postboarding, the faster anti-ultraviolet properties of fabric decline.

scholarly journals The Effect of Number and Position of Tuck Stitches within the Pattern Repeat on Air Permeability of Weft-knitted Fabrics from Glass Yarn

2019 ◽  
Vol 2 (3) ◽  
pp. 317-323
Author(s):  
Mehmet Erdem İnce
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Physical And Mechanical Properties ◽  
Air Permeability ◽  
Knitted Fabric ◽  
Knitted Fabrics ◽  
Synthetic Fibers ◽  
Fabric Structure ◽  
Knit Fabrics ◽  
Weft Knitted Fabric

The fact that weft knitted fabrics has a stretchable, 3D, porous and interlocking structure makes them unique when manufactured from high performance fibers. Knitted fabrics with different architectures exhibit different properties. Different loop forms like tuck and skip stitches with various loop lengths reveal different physical and mechanical properties. Literature review indicated that wisely arrangement of tuck stitches within the pattern repeat alter the weft-knitted fabric structure from natural and synthetic fibers. Therefore, we studied the effect of number and location of tuck stiches on air permeability of weft-knitted fabrics from glass yarn. Single-bed, flat weft knitting machine was used to knit fabrics with different architectures from three-ply glass yarn. The nominal single-end count of used E-glass yarn was 136 tex. It is anticipated that the number and location of tuck stitches within knit pattern effect physical and air permeability properties of weft-knitted fabrics from glass yarn.

scholarly journals Influence of Knitting Process Parameters on the Thermal Comfort Properties of Eri Silk Knitted Fabrics

2018 ◽  
Vol 26 (5(131)) ◽  
pp. 47-53 ◽  
Author(s):  
Balakrshnan Senthil Kumar ◽  
Thangavelu Ramachandran
Keyword(s):  
Thermal Properties ◽  
Thermal Comfort ◽  
Process Parameters ◽  
Loop Length ◽  
Knitted Fabrics ◽  
Vertical Wicking ◽  
Yarn Count ◽  
Thermal Comfort Properties ◽  
Fabric Structures ◽  
Eri Silk

Eri silk, a wild silk variety available in the northeastern states of India, has better softness, tensile and thermal properties. The present study aimed to develop different knitted structures and investigate the influence of knitting process variables on the thermal comfort and wicking properties. Knitted single jersey and single pique fabric structures were produced with two sets of yarns – 25 tex and 14.32 tex with three levels of loop length. Thermal properties of the fabric were analysed using an Alambeta instrument, and the wicking ability was measured with an vertical wicking tester. Thermal comfort properties of eri silk were also compared with those of conventional mulberry silk, with the experiment result revealing that eri silk has better comfort values. A statistically significant correlation is found between knitting process parameters viz. the yarn count, loop length knitting structure and the thermal and wickability values of the fabrics.

scholarly journals Strengthened Layered Polymer-Knitted Films And Coatings

2019 ◽  
Vol 8 (2) ◽  
pp. 5869-5872
Keyword(s):  
Composite Material ◽  
Raw Material ◽  
Knitted Fabric ◽  
Multilayer Material ◽  
Knitted Fabrics ◽  
Reinforced Composite ◽  
Reinforced Polymer ◽  
Polymer Laminates ◽  
Reinforced Composite Material

The article presents the results of a study of the properties of a new multi-layer reinforced composite material based on polyethylene and mesh knitted fabric. The physical and mechanical and operational properties of the reinforced polymer laminates depend on the type of raw material, the geometric dimensions and shape of the lumen of the mesh knitted fabrics, on the methods and modes of formation of the multilayer material.

Sign in / Sign up

Export Citation Format

Share Document