Consensus preferred recurrence-interval and vertical slip-rate estimates : review of Utah paleoseismic-trenching data by the Utah Quaternary Fault Parameters Working Group

2005 ◽  
Keyword(s):  
Working Group ◽  
Slip Rate ◽  
Recurrence Interval ◽  
Fault Parameters

Bounds on the Average Recurrence Interval of Major Earthquakes Along the Haiyuan Fault In North-Central China

1988 ◽  
Vol 59 (3) ◽  
pp. 81-89 ◽  
Author(s):  
Zhang Peizhen ◽  
Peter Molnar ◽  
Zhang Weigi ◽  
Deng Qidong ◽  
Wang Yipeng ◽  
...  
Keyword(s):  
Slip Rate ◽  
Recurrence Interval ◽  
Central China ◽  
Great Earthquake ◽  
Average Amount ◽  
Earthquake Recurrence ◽  
Surface Rupture ◽  
North Central ◽  
Recurrence Intervals ◽  
Historic Record

Abstract Evidence of surface rupture has been found in trenches near Caiyuan and Shaomayin along the Haiyuan fault, where a great earthquake occurred in 1920. In addition to the 1920 earthquake, faulting occurred at least once between 2590 ± 190 years and 1525 ± 170 years B.P. in Caiyuan, and there probably was another event since 1525 ± 170 years B.P. The formation and later tilting of fault-related, scarp-derived colluvial wedges in the Shaomayin trench appear to record the occurrence of two pre-1920 events in the last 2200–3700 years, but there could have been three or more events. The average recurrence interval for great earthquakes along the Haiyuan fault probably exceeds 700 years, for the 1920 Haiyuan earthquake is the only major event to have been reported in this area in as many years of recorded history. Using a Holocene slip rate along this fault of 8 ± 2 mm/yr, and 8 m as the average amount of offset associated with past great events that have been determined by our previous studies, the resultant earthquake recurrence intervals would be from 800 to 1400 years. The results from our trenches and the historic record are consistent with this range.

scholarly journals Active fault databases: building a bridge between earthquake geologists and seismic hazard practitioners, the case of the QAFI v.3 database

2017 ◽  
Vol 17 (8) ◽  
pp. 1447-1459 ◽  
Author(s):  
Julián García-Mayordomo ◽  
Raquel Martín-Banda ◽  
Juan M. Insua-Arévalo ◽  
José A. Álvarez-Gómez ◽  
José J. Martínez-Díaz ◽  
...  
Keyword(s):  
Seismic Hazard ◽  
Active Fault ◽  
Slip Rate ◽  
Seismic Hazard Assessment ◽  
Recurrence Interval ◽  
Maximum Magnitude ◽  
Geological Evidence ◽  
Seismic Parameters ◽  
Standard Quality

Abstract. Active fault databases are a very powerful and useful tool in seismic hazard assessment, particularly when singular faults are considered seismogenic sources. Active fault databases are also a very relevant source of information for earth scientists, earthquake engineers and even teachers or journalists. Hence, active fault databases should be updated and thoroughly reviewed on a regular basis in order to keep a standard quality and uniformed criteria. Desirably, active fault databases should somehow indicate the quality of the geological data and, particularly, the reliability attributed to crucial fault-seismic parameters, such as maximum magnitude and recurrence interval. In this paper we explain how we tackled these issues during the process of updating and reviewing the Quaternary Active Fault Database of Iberia (QAFI) to its current version 3. We devote particular attention to describing the scheme devised for classifying the quality and representativeness of the geological evidence of Quaternary activity and the accuracy of the slip rate estimation in the database. Subsequently, we use this information as input for a straightforward rating of the level of reliability of maximum magnitude and recurrence interval fault seismic parameters. We conclude that QAFI v.3 is a much better database than version 2 either for proper use in seismic hazard applications or as an informative source for non-specialized users. However, we already envision new improvements for a future update.

Coseismic Displacement and Recurrence Interval of the 1973 Ragay Gulf Earthquake, Southern Luzon, Philippines

2015 ◽  
Vol 10 (1) ◽  
pp. 83-90 ◽  
Author(s):  
Hiroyuki Tsutsumi ◽  
◽  
Jeffrey S. Perez ◽  
Jaime U. Marjes ◽  
Kathleen L. Papiona ◽  
...  
Keyword(s):  
Slip Rate ◽  
Recurrence Interval ◽  
Geologic Mapping ◽  
Fault Creep ◽  
Coseismic Displacement ◽  
Surface Rupture ◽  
The Past

The 1973 Ragay Gulf earthquake produced an onshore surface rupture approximately 30 km in length along the Guinayangan segment of the Philippine fault in southern Luzon Island. Through geologic mapping and paleoseismic trenching, we have characterized the amount of coseismic offsets, the average recurrence interval, and the slip rate of the segment. The coseismic offsets we identified in the field were fairly constant along the fault, ranging from 1 to 2 m. Paleoseismic trenching at the Capuluan Tulon site exposed stratigraphic evidence for three or possibly four surfacerupturing events after the deposition of strata dated at AD 410–535. The average recurrence interval was calculated to be 360–780 years, which is close to that for the Digdig fault, the source fault of the 1990 central Luzon earthquake. The slip rate, based on the calculated recurrence interval and offsets during the 1973 earthquake, has been calculated to be 2.1–4.4 mm/yr. This rate is significantly smaller than the geodetic slip and creep rates of 20–25 mm/yr estimated for the Philippine fault on the islands of Masbate and Leyte. The slip rate deficit may be explained by the possibilities of underestimation of the recurrence interval due to possible missing paleoseismic events within the stratigraphic records, the occurrence of larger earthquakes in the past, and the aseismic fault creep between the surface-rupturing earthquakes.

scholarly journals Active fault databases: building a bridge between earthquake geologists and seismic hazard practitioners, the case of the QAFI v.3 database

2017 ◽  
Author(s):  
Julián García-Mayordomo ◽  
Raquel Martín-Banda ◽  
Juan M. Insua-Arévalo ◽  
José A. Álvarez-Gómez ◽  
José J. Martínez-Díaz ◽  
...  
Keyword(s):  
Seismic Hazard ◽  
Active Fault ◽  
Slip Rate ◽  
Seismic Hazard Assessment ◽  
Recurrence Interval ◽  
Maximum Magnitude ◽  
Geological Evidence ◽  
Seismic Parameters ◽  
Standard Quality

Abstract. Active fault databases are a very powerful and useful tool in seismic hazard assessment, particularly when singular faults are considered as seismogenic sources. Active fault databases are also a very relevant source of information for earth scientists, earthquake engineers and even teachers or journalists. Active fault databases, hence, should be updated and through reviewed on a regular basis in order to keep a standard quality and uniformed criteria. Desirably, active fault databases should indicate somehow the quality of the geological data and, particularly, the reliability attributed to crucial fault-seismic parameters, as Maximum Magnitude and Recurrence Interval. In this paper we explain how we tackled these issues during the process of updating and reviewing the Quaternary Active Fault Database of Iberia (QAFI) to its current version 3. We devote particular attention to describing the scheme devised for classifying the quality and representativeness of the geological evidence of Quaternary activity and the accuracy of the slip rate estimation in the database. Subsequently, we use this information as input for a straightforward rating of the level of reliability of Maximum Magnitude and Recurrence Interval fault seismic parameters. We conclude that QAFI v.3 is a much better database than version 2 either for a proper use in seismic hazard applications or as an informative source for non-specialized users. However, we already envision new improvements for a future update.

scholarly journals Which Fault Threatens Me Most? Bridging the Gap Between Geologic Data-Providers and Seismic Risk Practitioners

2021 ◽  
Vol 8 ◽  
Author(s):  
Oona Scotti ◽  
Francesco Visini ◽  
Joanna Faure Walker ◽  
Laura Peruzza ◽  
Bruno Pace ◽  
...  
Keyword(s):  
Seismic Hazard ◽  
Slip Rate ◽  
End Users ◽  
Central Apennines ◽  
Slip Rates ◽  
Relative Contribution ◽  
Fault Parameters ◽  
Main Fault ◽  
Hazard And Risk ◽  
Geologic Data

The aim of the Fault2SHA European Seismological Commission Working Group Central Apennines laboratory is to enhance the use of geological data in fault-based seismic hazard and risk assessment and to promote synergies between data providers (earthquake geologists), end-users and decision-makers. Here we use the Fault2SHA Central Apennines Database where geologic data are provided in the form of characterized fault traces, grouped into faults and main faults, with individual slip rate estimates. The proposed methodology first derives slip rate profiles for each main fault. Main faults are then divided into distinct sections of length comparable to the seismogenic depth to allow consideration of variable slip rates and the exploration of multi-fault ruptures in the computations. The methodology further allows exploration of epistemic uncertainties documented in the database (e.g., main fault definition, slip rates) as well as additional parameters required to characterize the seismogenic potential of fault sources (e.g., 3D fault geometries). To illustrate the power of the methodology, in this paper we consider only one branch of the uncertainties affecting each step of the computation procedure. The resulting hazard and typological risk maps allow both data providers and end-users 1) to visualize the faults that threaten specific localities the most, 2) to appreciate the density of observations used for the computation of slip rate profiles, and 3) interrogate the degree of confidence on the fault parameters documented in the database (activity and location certainty). Finally, closing the loop, the methodology highlights priorities for future geological investigations in terms of where improvements in the density of data within the database would lead to the greatest decreases in epistemic uncertainties in the hazard and risk calculations. Key to this new generation of fault-based seismic hazard and risk methodology are the user-friendly open source codes provided with this publication, documenting, step-by-step, the link between the geological database and the relative contribution of each section to seismic hazard and risk at specific localities.

Determining the Slip Rate and Earthquake Recurrence Interval on the Tip of a Foreberg in the Gobi-Altai, Mongolia

2021 ◽  
Author(s):  
C.H. Lee ◽  
Y.B. Seong ◽  
J.-S. Oh
Keyword(s):  
Surface Deformation ◽  
Slip Rate ◽  
Alluvial Fan ◽  
Recurrence Interval ◽  
Luminescence Dating ◽  
High Mountain ◽  
Earthquake Recurrence ◽  
Mountain Ranges ◽  
Earthquake Recurrence Interval ◽  
Exposure Ages

Abstract ––The Gobi-Altai, Mongolia, includes high mountain ranges that have accommodated the compressional stresses derived from the collision between the Eurasian and Indian Plates. The Gurvan Bogd, which is one of the main mountain ranges in the Gobi-Altai, is a restraining bend along the Bogd sinistral fault. Although surface ruptures did not form near the Artz Bogd during the Mw = 8.1 Gobi-Altai earthquake of 1957, it is still active, as evidenced by a growing topography (i.e., forebergs). Six foreberg ridges have formed in the foreland of the Artz Bogd, which are considered to be the result of surface deformation of alluvial fans due to thrusting. One stream has cut down to expose a foreberg tip, providing the opportunity to explore the slip evolution of the region. Here we map a growing fault structure related to blind thrusting. We identify five faulting events from an analysis of the outcrop and apply optically stimulated luminescence dating to the faulted sedimentary layers, yielding an average slip rate of 0.045 ± 0.007 m/kyr and an earthquake recurrence interval of 5.8 ± 0.5 kyr over the last ~32 kyr. Furthermore, the long-term (~600 kyr) uplift rate of the foreberg is 0.067 ± 0.007 m/kyr, as deduced by dividing the vertical displacement of the alluvial fan surface by the 10Be surface exposure ages of boulders on the fan. The discrepancy (20–30%) between these two deformation rates may be due to the different timescales they cover and an along-strike gradient in slip rate.

scholarly journals A 2600-year-long paleoseismic record for the Himalayan Main Frontal Thrust (western Bhutan)

Solid Earth ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 2359-2375
Author(s):  
Romain Le Roux-Mallouf ◽  
Matthieu Ferry ◽  
Rodolphe Cattin ◽  
Jean-François Ritz ◽  
Dowchu Drukpa ◽  
...  
Keyword(s):  
Radiocarbon Dating ◽  
Late Holocene ◽  
Slip Rate ◽  
Large River ◽  
Recurrence Interval ◽  
Fault Propagation ◽  
Coseismic Slip ◽  
Alluvial Deposits ◽  
Fault Propagation Fold ◽  
Cumulative Deformation

Abstract. In spite of an increasing number of paleoseismic studies carried out over the last decade along the Himalayan Arc, the chronology of historical and prehistorical earthquakes is still poorly constrained. In this paper, we present geomorphologic and paleoseismic studies conducted over a large river-cut exposure along the Main Fontal Thrust in southwestern Bhutan. The Piping site reveals a 30 m high fault-propagation fold deforming late Holocene alluvial deposits. There, we carried out detailed paleoseismic investigations and built a chronological framework on the basis of 22 detrital charcoal samples submitted to radiocarbon dating. Our analysis reveals the occurrence of at least five large and great earthquakes between 485±125 BCE and 1714 CE with an average recurrence interval of 550±211 years. Coseismic slip values for most events reach at least 12 m and suggest associated magnitudes are in the range of Mw 8.5–9. The cumulative deformation yields an average slip rate of 24.9±10.4 mm yr−1 along the Main Frontal Thrust over the last 2600 years, in agreement with geodetic and geomorphological results obtained nearby.

Sign in / Sign up

Export Citation Format

Share Document