Variations in alloy composition of roman brooches

1981 ◽  
Vol 1 (1) ◽  
pp. 29-36
Author(s):  
Justine Bayley ◽  
S. Butcher
Keyword(s):  
Alloy Composition

Chemical partitioning of elements in Ni-base MC-carbide reinforced eutetic superalloys

1983 ◽  
Vol 41 ◽  
pp. 250-251
Author(s):  
E. F. Koch ◽  
E. L. Hall ◽  
S. W. Yang
Keyword(s):  
Alloy Composition ◽  
Volume Fraction ◽  
Lattice Mismatch ◽  
Turbine Blades ◽  
Eutectic Alloys ◽  
Alloy Matrix ◽  
X Ray ◽  
Gas Turbine Blades ◽  
Analytical Electron ◽  
Analytical Electron Microscope

The plane-front solidified eutectic alloys consisting of aligned tantalum monocarbide fibers in a nickel alloy matrix are currently under consideration for future aircraft and gas turbine blades. The MC fibers provide exceptional strength at high temperatures. In these alloys, the Ni matrix is strengthened by the precipitation of the coherent γ' phase (ordered L12 structure, nominally Ni3Al). The mechanical strength of these materials can be sensitively affected by overall alloy composition, and these strength variations can be due to several factors, including changes in solid solution strength of the γ matrix, changes in they γ' size or morphology, changes in the γ-γ' lattice mismatch or interfacial energy, or changes in the MC morphology, volume fraction, thermal stability, and stoichiometry. In order to differentiate between these various mechanisms, it is necessary to determine the partitioning of elemental additions between the γ,γ', and MC phases. This paper describes the results of such a study using energy dispersive X-ray spectroscopy in the analytical electron microscope.

Influence of Heat Treatments on Microstructures in an Fe-Co-V Alloy

1974 ◽  
Vol 32 ◽  
pp. 512-513
Author(s):  
S. Mahajan ◽  
M. R. Pinnel ◽  
J. E. Bennett
Keyword(s):  
Single Phase ◽  
Alloy Composition ◽  
Supersaturated Solid Solution ◽  
Cell Formation ◽  
Heat Treatments ◽  
Air Cooling ◽  
Iced Brine ◽  
Transmission Electron ◽  
The Matrix ◽  
Bcc Structure

The microstructural changes in an Fe-Co-V alloy (composition by wt.%: 2.97 V, 48.70 Co, 47.34 Fe and balance impurities, such as C, P and Ni) resulting from different heat treatments have been evaluated by optical metallography and transmission electron microscopy. Results indicate that, on air cooling or quenching into iced-brine from the high temperature single phase ϒ (fcc) field, vanadium can be retained in a supersaturated solid solution (α2) which has bcc structure. For the range of cooling rates employed, a portion of the material appears to undergo the γ-α2 transformation massively and the remainder martensitically. Figure 1 shows dislocation topology in a region that may have transformed martensitically. Dislocations are homogeneously distributed throughout the matrix, and there is no evidence for cell formation. The majority of the dislocations project along the projections of <111> vectors onto the (111) plane, implying that they are predominantly of screw character.

NiAl precipitation in Fe-12w/o Cr-5w/o Ni-4w/o Al

1983 ◽  
Vol 41 ◽  
pp. 202-203
Author(s):  
L.E. Murr ◽  
J.S. Dunning ◽  
S. Shankar
Keyword(s):  
Solid Solution ◽  
Stainless Steel ◽  
Stainless Steels ◽  
Alloy Composition ◽  
Chromium Content ◽  
Scale Up ◽  
Optical Metallography ◽  
Property Evaluation ◽  
310 Stainless Steel ◽  
Microstructural Studies

Aluminum additions to conventional 18Cr-8Ni austenitic stainless steel compositions impart excellent resistance to high sulfur environments. However, problems are typically encountered with aluminum additions above about 1% due to embrittlement caused by aluminum in solid solution and the precipitation of NiAl. Consequently, little use has been made of aluminum alloy additions to stainless steels for use in sulfur or H2S environments in the chemical industry, energy conversion or generation, and mineral processing, for example.A research program at the Albany Research Center has concentrated on the development of a wrought alloy composition with as low a chromium content as possible, with the idea of developing a low-chromium substitute for 310 stainless steel (25Cr-20Ni) which is often used in high-sulfur environments. On the basis of workability and microstructural studies involving optical metallography on 100g button ingots soaked at 700°C and air-cooled, a low-alloy composition Fe-12Cr-5Ni-4Al (in wt %) was selected for scale up and property evaluation.

AEM analysis of solidification catalysts in atomized Fe-Ni

1986 ◽  
Vol 44 ◽  
pp. 584-585
Author(s):  
Matthew R. Libera
Keyword(s):  
Powder Particle ◽  
Alloy Composition ◽  
Particle Diameter ◽  
Metastable Phases ◽  
Liquid Droplets ◽  
Nucleation Kinetics ◽  
Ni Alloys ◽  
Nonequilibrium Solidification

The liquid droplets produced by atomization processes are believed to undergo substantial supercooling during solidification, because the catalytic heterogeneities, for statistical reasons, tend to be isolated in the larger droplets. This supercooling can lead to the nucleation of metastable phases. As part of a study on the effect of liquid supercooling on nonequilibrium solidification, three binary Fe-Ni alloys have been produced by conventional argon atomization (Fe-20Ni, Fe-30Ni, and Fe-40Ni). The primary variables in these experiments are: i) the alloy composition; and ii) the powder particle diameter (inversely proportional to supercooling). Of particular interest in this system is the competitive nucleation kinetics between the stable fee and metastable bec phases. Bcc is expected to nucleate preferentially with decreasing %Ni and decreasing particle diameter.

scholarly journals Inverse Design of Fe-Based Bulk Metallic Glasses Using Machine Learning

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 729
Author(s):  
Junhyub Jeon ◽  
Namhyuk Seo ◽  
Hwi-Jun Kim ◽  
Min-Ha Lee ◽  
Hyun-Kyu Lim ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Metallic Glasses ◽  
Alloy Composition ◽  
Relevant Literature ◽  
Bulk Metallic Glasses ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ann Models ◽  
Wide Scale ◽  
Artificial Neural Network Ann

Fe-based bulk metallic glasses (BMGs) are a unique class of materials that are attracting attention in a wide variety of applications owing to their physical properties. Several studies have investigated and designed the relationships between alloy composition and thermal properties of BMGs using an artificial neural network (ANN). The limitation of the wide-scale use of these models is that the required composition is yet to be found despite numerous case studies. To address this issue, we trained an ANN to design Fe-based BMGs that predict the thermal properties. Models were trained using only the composition of the alloy as input and were created from a database of more than 150 experimental data of Fe-based BMGs from relevant literature. We adopted these ANN models to design BMGs with thermal properties to satisfy the intended purpose using particle swarm optimization. A melt spinner was employed to fabricate the designed alloys. X-ray diffraction and differential thermal analysis tests were used to evaluate the specimens.

Photoconductivité dans l'alliage GaAsxSb1−x en présence d'un champ magnétique

1974 ◽  
Vol 52 (8) ◽  
pp. 743-747 ◽  
Author(s):  
A. Filion ◽  
E. Fortin
Keyword(s):  
Magnetic Fields ◽  
Band Gap ◽  
Effective Mass ◽  
Alloy Composition ◽  
Longitudinal Optical ◽  
Optical Phonons ◽  
Champ Magnétique

The intrinsic photoconductivity of several samples of the alloy GaAsxSb1−x has been studied at 4.2 K in the presence of magnetic fields of up to 65 kG. Values for the band-gap, the reduced effective mass of the carriers, the energy of the longitudinal optical phonons across the alloy composition are deduced from the measurements.

Effect of substrate alloy composition on the oxidation behaviour and degradation of aluminide coatings on two Ni base superalloys

2020 ◽  
Vol 167 ◽  
pp. 108494 ◽  
Author(s):  
W. Leng ◽  
R. Pillai ◽  
D. Naumenko ◽  
T. Galiullin ◽  
W.J. Quadakkers
Keyword(s):  
Alloy Composition ◽  
Oxidation Behaviour ◽  
Aluminide Coatings ◽  
Substrate Alloy
Sign in / Sign up

Export Citation Format

Share Document