Glass in building. Coated glass

2015 ◽  
Keyword(s):  
Coated Glass

Thrombin Stimulated Platelet Accumulation on Protein Coated Glass Capillaries: Role of Adhesive Platelet α-Granule Proteins

1989 ◽  
Vol 62 (03) ◽  
pp. 989-995 ◽  
Author(s):  
Juliette N Mulvihill ◽  
J Andrew Davies ◽  
Florence Toti ◽  
Jean-Marie Freyssinet ◽  
Jean-Pierre Cazenave
Keyword(s):  
Human Platelets ◽  
Capillary Perfusion ◽  
Coated Glass ◽  
Bovine Collagen ◽  
Glass Capillaries ◽  
Human Thrombin ◽  
Platelet Accumulation ◽  
Granule Proteins ◽  
Von Willebrand

SummaryThe generation of trace amounts of thrombin at artificial surfaces in contact with blood is likely to be a contributing factor in thrombosis on biomaterials. Using an in vitro capillary perfusion system, platelet accumulation on glass surfaces, uncoated or precoated with purified bovine collagen or human plasma proteins, was determined in the presence or absence of preadsorbed purified human thrombin. Static adsorption for 15 min at 22° C from solutions of thrombin 100 NIH units (33 μg)/ml gave surface concentrations in the range 0.019-0.101 μg/cm2. Protein coated capillaries, thrombin treated or untreated, were perfused for 2 min at 37° C with suspensions of washed 111In-labeled human platelets in Tyrode's-albumin buffer containing 40% washed red blood cells, under conditions of controlled, non pulsatile laminar flow (50 s−1 or 2,000 s−1). Platelet accumulation was increased in the presence of surface adsorbed thrombin on uncoated and albumin or fibrinogen coated glass but little affected on fibronectin or collagen coated glass. On von Willebrand factor (vWF) coated glass, thrombin enhancement was observed only at high shear forces. In experiments using antibodies against human platelet α-granule proteins, thrombin stimulated platelet deposition in uncoated glass capillaries was inhibited at 2,000 s−1 by anti-vWF and to a lesser extent by anti-fibrinogen but not by antithrombospondin antibodies.

Selective Inhibition of Thromboxane Synthetase with Dazoxiben - Basis of Its Inhibitory Effect on Platelet Adhesion

1983 ◽  
Vol 49 (02) ◽  
pp. 096-101 ◽  
Author(s):  
V C Menys ◽  
J A Davies
Keyword(s):  
Arachidonic Acid ◽  
Platelet Adhesion ◽  
Fold Increase ◽  
Selective Inhibition ◽  
Inhibitory Effect ◽  
Selective Inhibitor ◽  
Coated Glass ◽  
Thromboxane Synthetase ◽  
Pre Treatment

SummaryPlatelet adhesion to rabbit aortic subendothelium or collagen-coated glass was quantitated in a rotating probe device by uptake of radio-labelled platelets. Under conditions in which aspirin had no effect, dazoxiben, a selective inhibitor of thromboxane synthetase, reduced platelet adhesion to aortic subendothelium by about 40% but did not affect adhesion to collagen-coated glass. Pre-treatment of aortic segments with 15-HPETE, a selective inhibitor of PGI2-synthetase, abolished the inhibitory effect of dazoxiben on adhesion. Concentrations of 6-oxo-PGFlα in the perfusate were raised in the presence of dazoxiben alone, and following addition of thrombin (10 units/ml) there was a 2-3 fold increase in concentration. Perfusion of damaged aorta with platelets labelled with (14C)-arachidonic acid in the presence of thrombin and dazoxiben resulted in the appearance of (14C)-labelled-6-oxo-PGFiα. Inhibition of thromboxane synthetase limits platelet adhesion probably by promoting vascular synthesis of PGI2 from endoperoxides liberated from adherent platelets, which subsequently promotes detachment of cells from the surface.

scholarly journals Water Influence on the Uniaxial Tensile Behavior of Polytetrafluoroethylene-Coated Glass Fiber Fabric

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 846
Author(s):  
Hastia Asadi ◽  
Joerg Uhlemann ◽  
Natalie Stranghoener ◽  
Mathias Ulbricht
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Operation Time ◽  
Uniaxial Tensile ◽  
Membrane Structures ◽  
Strength Deterioration ◽  
Coated Glass ◽  
Reversible Loss ◽  
The Impact ◽  
Loss Of Strength

Polytetrafluoroethylene (PTFE)-coated glass fiber fabrics are used for long-lasting membrane structures due to their outstanding mechanical properties, chemical stabilities, and satisfying service life. During their operation time, different environmental impacts might influence their performance, especially regarding the mechanical properties. In this contribution, the impact of water on the tensile strength deterioration was assessed experimentally, providing evidence of considerable but partially reversible loss of strength by up to 20% among the various types of investigated industrially established fabrics.

Chitosan‐Coated Glass Beads in a Fluidized Bed for Use in Fixed‐Bed Dye Adsorption

2021 ◽  
Author(s):  
Daniele Costa da Silva Alves ◽  
Roni Anderson Capa Verde Pires ◽  
Francine Fonseca Diniz Algã ◽  
Janaina Oliveira Gonçalves ◽  
Guilherme Luiz Dotto ◽  
...  
Keyword(s):  
Fluidized Bed ◽  
Fixed Bed ◽  
Dye Adsorption ◽  
Glass Beads ◽  
Coated Glass

Solvent diffusion mechanism of PMMA/ acetone coated glass fiber fabric during curing process

2021 ◽  
pp. 152808372110362
Author(s):  
Zhenrong Zheng ◽  
Yuejiao Bi ◽  
Lihuan Tong ◽  
Yalan Liu
Keyword(s):  
Glass Fiber ◽  
Diffusion Mechanism ◽  
Coating Film ◽  
Curing Process ◽  
Curing Time ◽  
Solvent Concentration ◽  
Solvent Diffusion ◽  
Coated Glass ◽  
Drying Model ◽  
Fiber Fabric

Fabric it is not an impermeable substrate because of fiber porosity. To study the solvent diffusion mechanism of coated fabric in the curing process, the drying model of PMMA/acetone coated glass fiber fabric was established. This drying model was verified by confocal Raman spectroscopy. Finally, the impact of fabric structure, thickness and porosity on the solvent diffusion process in coated fabrics was studied by the model. It was shown that the predicted solvent concentrations by the model were consistent with the experimental values. This model can be used to quantitatively calculate the solvent concentration at any position and at any time inside the coating film during the drying process. Moreover, it can also predict the curing time and residual solvent concentration of the coating fabric required to reach drying equilibrium. Compared with coated 3/1 twill, 5/3 satin and 2/1 twill, the solvent diffusion of coated plain fabric was faster during curing. Under the same environmental conditions, the thinner the fabric was and the greater the porosity was, the shorter the curing time was. The fitting equations for fabric thickness, fabric porosity and drying time were obtained, which can provide a theoretical guidance for the preparation, performance research and drying conditions optimization of PMMA coated textile materials.

Adsorption-induced polymerization of 3-methylthiophene at silver-coated glass surfaces and electroactive characteristics

2011 ◽  
Vol 127 (1-2) ◽  
pp. 185-190
Author(s):  
Chien-Hsin Yang ◽  
Chen-Hao Wu ◽  
Ying-Jie Cai ◽  
Chen-Yan Li ◽  
Yen Wei ◽  
...  
Keyword(s):  
Coated Glass ◽  
Glass Surfaces
Sign in / Sign up

Export Citation Format

Share Document