Identification of vehicles and infrastructures compatibility - Graphical expression for consumer information on EV power supply

2019 ◽  
Author(s):  
A. Tanaka ◽  
M. Yamaguchi ◽  
T. Hirano

The plasma polymerization replica method and its apparatus have been devised by Tanaka (1-3). We have published several reports on its application: surface replicas of biological and inorganic specimens, replicas of freeze-fractured tissues and metal-extraction replicas with immunocytochemical markers.The apparatus for plasma polymerization consists of a high voltage power supply, a vacuum chamber containing a hydrocarbon gas (naphthalene, methane, ethylene), and electrodes of an anode disk and a cathode of the specimen base. The surface replication by plasma polymerization in negative glow phase on the cathode was carried out by gassing at 0.05-0.1 Torr and glow discharging at 1.5-3 kV D.C. Ionized hydrocarbon molecules diffused into complex surface configurations and deposited as a three-dimensionally polymerized film of 1050 nm in thickness.The resulting film on the complex surface had uniform thickness and showed no granular texture. Since the film was chemically inert, resistant to heat and mecanically strong, it could be treated with almost any organic or inorganic solvents.


2012 ◽  
Vol 82 (3) ◽  
pp. 209-215 ◽  
Author(s):  
Simone Bell ◽  
Heikki Pakkala ◽  
Michael P. Finglas

Food composition data (FCD) comprises the description and identification of foods, as well as their nutrient content, other constituents, and food properties. FCD are required for a range of purposes including food labeling, supporting health claims, nutritional and clinical management, consumer information, and research. There have been differences within and beyond Europe in the way FCD are expressed with respect to food description, definition of nutrients and other food properties, and the methods used to generate data. One of the major goals of the EuroFIR NoE project (2005 - 10) was to provide tools to overcome existing differences among member states and parties with respect to documentation and interchange of FCD. The establishment of the CEN’s (European Committee for Standardisation) TC 387 project committee on Food Composition Data, led by the Swedish Standards Institute, and the preparation of the draft Food Data Standard, has addressed these deficiencies by enabling unambiguous identification and description of FCD and their quality, for dissemination and data interchange. Another major achievement of the EuroFIR NoE project was the development and dissemination of a single, authoritative source of FCD in Europe enabling the interchange and update of data between countries, and also giving access to users of FCD.


2019 ◽  
Vol 2 (1) ◽  
pp. 8-16 ◽  
Author(s):  
P. A. Khlyupin ◽  
G. N. Ispulaeva

Introduction: The co-authors provide an overview of the main types of wind turbines and power generators installed into wind energy devices, as well as advanced technological solutions. The co-authors have identified the principal strengths and weaknesses of existing wind power generators, if applied as alternative energy sources. The co-authors have proven the need to develop an algorithm for the selection of a wind generator-based autonomous power supply system in the course of designing windmill farms in Russia. Methods: The co-authors have analyzed several types of wind turbines and power generators. Results and discussions: The algorithm for the selection of a wind generator-based autonomous power supply system is presented as a first approximation. Conclusion: The emerging algorithm enables designers to develop an effective wind generator-based autonomous power supply system.


2019 ◽  
Vol 5 (1) ◽  
pp. 35-45
Author(s):  
Markus Dwiyanto Tobi ◽  
Alimuddin Mappa

The role of the power supply device is to produce, process and distribute energy sources. Telecommunication equipment can only operate if it has continuous supply. Therefore, to maintain the continuity of the supply, a UPS (Uninterruptable Power Supply) device system is needed so that the supply to the Essential Load device will remain available so that continuity will be maintained. This research designs and proposes how a series of automatic redundant switch systems on UPS to ensure the availability of power supply for the main equipment of telecommunications systems. The Auto switch circuit is designed to have 3 (three) working stages which will trigger the relay driver as control circuit, namely the normal working condition of the contactor input K1 is present, the input condition is zero (lost), and the input condition is present. This system can automatically supply power to telecommunications equipment.


2020 ◽  
Vol 20 (3) ◽  
pp. 209-215
Author(s):  
Hyun-Seok Song ◽  
Min-Ho Son ◽  
Sung-Ju Yoo ◽  
Do-Hyun Jung ◽  
Boo-Hee Park

Sign in / Sign up

Export Citation Format

Share Document