Recommendations for cleaning and sterilization of pipeline milking machine installations

1975 ◽  
Keyword(s):  
Milking Machine

Method of high frequency therapy at cows' mastitis during machine milking

2020 ◽  
pp. 9-12
Author(s):  
Viktor E. Lyubimov ◽  
Keyword(s):  
Dairy Cows ◽  
Electromagnetic Fields ◽  
High Frequency ◽  
High Efficiency ◽  
Environmentally Friendly ◽  
Ultrahigh Frequency ◽  
Machine Milking ◽  
High Frequency Electromagnetic Field ◽  
Milking Machine ◽  
Methods Of Treatment

Health of dairy cows ensures human health, so it is important that dairy products do not contain antibiotics that are used to treat any inflammation, including mastitis. In Russia at present, the problem of mastitis in cows exists with both attached and loose housing of cows. Mastitis of dairy cows are the great problem in milking husbandry. Losses from mastitis in milk yield can reach 15-20%. The main reasons for the occurrence of nonspecific mastitis of cows are the shortcomings of the working components of the milking machine: the degree of deterioration of the nipple rubber and the violation of machine milking technology (the reduction in pre-milking time and vacuum fluctuations account for 70% of all causes). Treatment of mastitis with antibiotics is effective, but not environmentally friendly and unacceptable. For the treatment of inflammation of the udder, it is necessary to use more environmentally friendly methods of treatment, one of which is the exposure to ultra-high frequency electromagnetic field tested by medicine. Use of three types of medical-mobile milking machines with the same method of exposure to ultrahigh-frequency electromagnetic fields on cow's nipples through electrodes in milking cups: LPDA-1-UHF, LPDA-2-UHF and LPDA-UHF-30 M, is described in the article. Author proved that cows with subclinical forms of mastitis recovered faster during milking with exposure to the ultrahigh frequency than when treated by antibiotics, and milking with the ultrahigh frequency device helps to recover 82% of the affected quarters with clinical forms and 100% of cows with subclinical forms of mastitis or with udder irritation. The high efficiency of the method of exposure to electromagnetic fields of the ultrahigh frequency during machine milking by means of medical-mobile milking machines LPDA-UHF for the prevention and treatment of mastitis of cows was shown.

DIFFERENT COW BREEDS MILKABILITY DEPENDING ON KAPPA-CASEIN AND BETA-GLOBULIN GENOTYPES

2019 ◽  
Keyword(s):  
Milk Fat ◽  
Animal Husbandry ◽  
Holstein Cows ◽  
Maintenance System ◽  
Plant Feeding ◽  
Beta Globulin ◽  
Ayrshire Breed ◽  
The Common ◽  
Milking Machine ◽  
Beta Lactoglobulin

Results of the Ayrshire breed cows, Holstein cows and Holstein-Yaroslavl cross breed cows milk productiv-ity analysis in the same environment conditions and depending on the kappa-casein and beta-lactoglobulin genotypes are presented in this article. The animals are kept in the common environmental conditions of the LLC Farming firm “Pakhma», the Ayrshire breeding plant. Feeding of cows here is carried out according to detailed norms, concentrated feed averages 43%. The maintenance system is year-round stalling, milking is carried out in the milk line, the DeLaval milking machine is used, and labor-intensive processes in animal husbandry are mechanized. The farm has a milk processing shop. It was established that all the inspected cows (n=91) had a prevailing AA kappa-casein genotype – 75,8% on average. BB Ayrshire breed and Hol-stein-Yaroslavl cross breed genotypes were not established. AB and BB beta-lactoglobulin genotypes are seen on average with a frequency of 44%. AA beta-lactoglobulin genotype in Holstein cows breed was not found. The indicators of statistically reliable difference in milkability among all groups and genotypes was not estab-lished. A higher consistence of protein in the milk of B-allele kappa-casein type cows is evident in all groups with no difference between breed belonging. The complex variant of CSN3/LGB genotypes showed that ac-cording to ultimate milk fat and protein yield the most productive cows were:АВ/ВВ, АВ/АВ genotype Ayr-shire cows, АВ/АВ Holstein genotype cows, AB/BB genotype Holstein-Yaroslavl cross breed cows. Hence, the most efficient cows are those with B-allele variants.

Method and results of experimental researches of modes of work of the adaptive milking equipment on the basis of the portion meter of the weight type

2020 ◽  
pp. 140-146
Author(s):  
I. A. Afanasiev ◽  
V. V. Tkach
Keyword(s):  
Regression Analysis ◽  
Vacuum Pressure ◽  
Limit Values ◽  
Operating Modes ◽  
Machine Milking ◽  
Milk Output ◽  
Mode Of Operation ◽  
Milking Machine ◽  
Experimental Researches

Annotation Purpose. Improving the efficiency of machine milking due to the improvement of milking equipment on the basis of the portion meter of the weight type. Methods. Studies have been conducted on the basis of the planned experiment. The data obtained were processed using the methods of regression analysis. Results. The technique of laboratory researches is developed, a prototype of a membrane regulator of vacuum is made and experimental researches of operating modes of the adaptive milking equipment on the basis of the portion meter of the weight type. According to the results of the research, the dependence between the parameters and the mode of operation of the membrane vacuum regulator was obtained. Conclusions. The dependence is obtained, between the vacuum pressure in the milk collection chamber of the collector, milk expense, the diameters of the milk pipe and the diameters of a throttle opening. The limit values of the intensity of milk output (0.2 m3/s) at which there is a critical drop in the working vacuum pressure in the milk collection chamber of the collector and the corresponding choke parameters (diameter of the throttle opening 0,001 m) are defined. This eliminates this negative phenomenon. Keywords: adaptive milking equipment, milking machine, machine milking, milk expense.

scholarly journals Simulation Tests of a Cow Milking Machine—Analysis of Design Parameters

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1358
Author(s):  
Ewa Golisz ◽  
Adam Kupczyk ◽  
Maria Majkowska ◽  
Jędrzej Trajer
Keyword(s):  
Mathematical Model ◽  
Simplified Model ◽  
Design Parameters ◽  
Degree Polynomial ◽  
Fourth Degree ◽  
Local Loss ◽  
Linear Drag ◽  
Milking Machine ◽  
Machine Analysis ◽  
The Impact

The objective of this paper was to create a mathematical model of vacuum drops in a form that enables the testing of the impact of design parameters of a milking cluster on the values of vacuum drops in the claw. Simulation tests of the milking cluster were conducted, with the use of a simplified model of vacuum drops in the form of a fourth-degree polynomial. Sensitivity analysis and a simulation of a model with a simplified structure of vacuum drops in the claw were carried out. As a result, the impact of the milking machine’s design parameters on the milking process could be analysed. The results showed that a change in the local loss and linear drag coefficient in the long milk duct will have a lower impact on vacuum drops if a smaller flux of inlet air, a higher head of the air/liquid mix, and a higher diameter of the long milk tube are used.

Sign in / Sign up

Export Citation Format

Share Document