Specification for acrylic resin teeth

1966 ◽  
Keyword(s):  
Acrylic Resin

Immunocytochemistry after fast freeze fixation-freeze substitution: Advantages and limits

1990 ◽  
Vol 48 (3) ◽  
pp. 42-43
Author(s):  
Marie-Thérèse Nicolas
Keyword(s):  
Osmium Tetroxide ◽  
Freeze Substitution ◽  
Acrylic Resin ◽  
Expected Improvement ◽  
List Type ◽  
Chemical Fixation ◽  
Freeze Fixation ◽  
Liquid Chemical ◽  
Luciferase Enzyme ◽  
Lower Background

An alternative to aqueous chemical fixation consists in immobilizing physically the specimen by freezing it as fast as possible without using any cryoprotectant. This Fast Freeze Fixation (FFF) followed by Freeze Substitution (FS) avoids osmotic artefacts due to the slow penetration of liquid chemical fixative. Associated with Immuno-Gold labeling (IGS), FFF-FS allows a more precise localization of antigens.Using the bioluminescent bacteria Vibrio harveyi, a comparison of IGS with an antibody directed against its luciferase (enzyme of the luminescent reaction) has been done after liquid chemical fixation versus FFFFS. This later technique, beside an expected improvement of the ultrastructure always shows a better preservation of antigenicity and a lower background. In the case of FFF-FS technique (Figure 3):–labeling in acrylic resin (LRWhite) is 2 to 4 fold more intense than in epoxy resin (Epon),–but the ultrastructure is always better in Epon.–but the ultrastructure is always better in Epon.–The addition of fixatives in the substitution medium, results in a decrease of labeling which is more important in the case of a mixture of fixatives than with osmium tetroxide alone; with one exception: the substitution with glutaraldehyde which produces a dramatic increase in the density of the labeling but also, at the same time, a swelling of the cells of about 30%.

Comparative study of some properties of flexible and conventional heat cured acrylic resin denture base material

2018 ◽  
Vol 21 (1) ◽  
pp. 87-91
Author(s):  
Wesam E Badr ◽  
Hassan M Sakr ◽  
Muhammad A Masoud ◽  
Mohamed A Quassem
Keyword(s):  
Comparative Study ◽  
Base Material ◽  
Acrylic Resin ◽  
Denture Base

scholarly journals Comparison of Fracture Resistance in Thermal and Self-Curing Acrylic Resins—An In Vitro Study

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1234
Author(s):  
António Sérgio Silva ◽  
Aurora Carvalho ◽  
Pedro Barreiros ◽  
Juliana de Sá ◽  
Carlos Aroso ◽  
...  
Keyword(s):  
Fracture Resistance ◽  
Research Work ◽  
Testing Machine ◽  
In Vitro Study ◽  
Dimensional Accuracy ◽  
Acrylic Resin ◽  
Thermosetting Resins ◽  
Acrylic Resins ◽  
The Difference

Thermal and self-curing acrylic resins are frequently and versatilely used in dental medicine since they are biocompatible, have no flavor or odor, have satisfactory thermal qualities and polishing capacity, and are easy and fast. Thus, given their widespread use, their fracture resistance behavior is especially important. In this research work, we comparatively analyzed the fracture resistance capacity of thermo and self-curing acrylic resins in vitro. Materials and Methods: Five prosthesis bases were created for each of the following acrylic resins: Lucitone®, ProBase®, and Megacryl®, which were submitted to different forces through the use of the CS® Dental Testing Machine, usually mobilized in the context of fatigue tests. To this end, a point was defined in the center of the anterior edge of the aforementioned acrylic resin bases, for which the peak tended until a fracture occurred. Thermosetting resins were, on average, more resistant to fracture than self-curable resins, although the difference was not statistically significant. The thermosetting resins of the Lucitone® and Probase® brands demonstrated behavior that was more resistant to fracture than the self-curing homologues, although the difference was not statistically significant. Thermosetting resins tended to be, on average, more resistant to fracture and exhibited the maximum values for impact strength, compressive strength, tensile strength, hardness, and dimensional accuracy than self-curing resins, regardless of brand.

scholarly journals Antibacterial Effect of Amino Acid–Silver Complex Loaded Montmorillonite Incorporated in Dental Acrylic Resin

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1442
Author(s):  
Kumiko Yoshihara ◽  
Noriyuki Nagaoka ◽  
Aya Umeno ◽  
Akinari Sonoda ◽  
Hideki Obika ◽  
...  
Keyword(s):  
Amino Acid ◽  
Antibacterial Agents ◽  
Antibacterial Effect ◽  
Dental Materials ◽  
Silver Ions ◽  
Acrylic Resin ◽  
Chloride Ions ◽  
Antibacterial Efficacy ◽  
Growth Measurement ◽  
Dental Acrylic

Several dental materials contain silver for antibacterial effect, however the effect is relatively low. The reason for the lower antibacterial efficacy of silver is considered to be the fact that silver ions bind to chloride ions in saliva. To develop new effective silver antibacterial agents that can be useful in the mouth, we synthesized two novel amino acid (methionine or histidine)–silver complexes (Met or His–Ag) loaded with montmorillonite (Mont) and analyzed their antibacterial efficacy. At first the complexes were characterized using nuclear magnetic resonance (NMR), and amino acid–Ag complex-loaded Mont (amino acid–Ag–Mont) were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The antibacterial efficacy of these materials in dental acrylic resin was then investigated by bacterial growth measurement using a spectrophotometer. As controls, commercially available silver-loaded zeolite and silver-zirconium phosphate were also tested. Dental acrylic resin incorporating His–Ag–Mont strongly inhibited Streptococcus mutans growth. This was explained by the fact that His-Ag complex revealed the highest amounts of silver ions in the presence of chloride. The structure of the amino acid–Ag complexes affected the silver ion presence in chloride and the antibacterial efficacy. His–Ag–Mont might be used as antibacterial agents for dental materials.

scholarly journals Enhancement of the Thermal Performance of the Paraffin-Based Microcapsules Intended for Textile Applications

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1120
Author(s):  
Virginija Skurkyte-Papieviene ◽  
Ausra Abraitiene ◽  
Audrone Sankauskaite ◽  
Vitalija Rubeziene ◽  
Julija Baltusnikaite-Guzaitiene
Keyword(s):  
Thermal Conductivity ◽  
Thermal Performance ◽  
Comparative Method ◽  
Multiwall Carbon Nanotubes ◽  
Acrylic Resin ◽  
Positive Influence ◽  
Outer Shell ◽  
Ir Camera ◽  
Spacer Fabric ◽  
Thermally Conductive

Phase changing materials (PCMs) microcapsules MPCM32D, consisting of a polymeric melamine-formaldehyde (MF) resin shell surrounding a paraffin core (melting point: 30–32 °C), have been modified by introducing thermally conductive additives on their outer shell surface. As additives, multiwall carbon nanotubes (MWCNTs) and poly (3,4-ethylenedioxyoxythiophene) poly (styrene sulphonate) (PEDOT: PSS) were used in different parts by weight (1 wt.%, 5 wt.%, and 10 wt.%). The main aim of this modification—to enhance the thermal performance of the microencapsulated PCMs intended for textile applications. The morphologic analysis of the newly formed coating of MWCNTs or PEDOT: PSS microcapsules shell was observed by SEM. The heat storage and release capacity were evaluated by changing microcapsules MPCM32D shell modification. In order to evaluate the influence of the modified MF outer shell on the thermal properties of paraffin PCM, a thermal conductivity coefficient (λ) of these unmodified and shell-modified microcapsules was also measured by the comparative method. Based on the identified optimal parameters of the thermal performance of the tested PCM microcapsules, a 3D warp-knitted spacer fabric from PET was treated with a composition containing 5 wt.% MWCNTs or 5 wt.% PEDOT: PSS shell-modified microcapsules MPCM32D and acrylic resin binder. To assess the dynamic thermal behaviour of the treated fabric samples, an IR heating source and IR camera were used. The fabric with 5 wt.% MWCNTs or 5 wt.% PEDOT: PSS in shell-modified paraffin microcapsules MPCM32D revealed much faster heating and significantly slower cooling compared to the fabric treated with the unmodified ones. The thermal conductivity of the investigated fabric samples with modified microcapsules MPCM32D has been improved in comparison to the fabric samples with unmodified ones. That confirms the positive influence of using thermally conductive enhancing additives for the heat transfer rate within the textile sample containing these modified paraffin PCM microcapsules.

scholarly journals Educational material of dental anatomy applied to study the morphology of permanent teeth

2004 ◽  
Vol 15 (3) ◽  
pp. 238-247 ◽  
Author(s):  
Selma Siéssere ◽  
Mathias Vitti ◽  
Luiz Gustavo de Sousa ◽  
Marisa Semprini ◽  
Simone Cecílio Hallak Regalo
Keyword(s):  
Acrylic Resin ◽  
Dental Students ◽  
Educational Material ◽  
Permanent Dentition ◽  
Permanent Teeth ◽  
Dental Student ◽  
Large Individual ◽  
Morphologic Characteristics ◽  
Dental Anatomy

The purpose of this report is to present educational material that would allow the dental student to learn to easily identify the morphologic characteristics of permanent teeth, and how they fit together (occlusion). In order to do this, macro models of permanent teeth with no attrition were carved in wax and later molded with alginate. These molds were filled with plaster, dental stone and/or cold-cured acrylic resin. The large individual dental stone tooth models were mounted on a wax base, thus obtaining maxillary and mandibular arches which were occluded. These dental arches were molded with plaster or dental stone. The authors suggest that these types of macro models allow an excellent visualization of the morphologic characteristics of permanent teeth and occlusion. Dental students are able to carve the permanent dentition in wax with great facility when they can observe macro models.

scholarly journals Shear bond strength of novel calcium aluminate-based cement (EndoBinder) to root dentine

2014 ◽  
Vol 08 (04) ◽  
pp. 498-503 ◽  
Author(s):  
Lucas da Fonseca Roberti Garcia ◽  
Hebert Luis Rossetto ◽  
Fernanda de Carvalho Panzeri Pires-de-Souza
Keyword(s):  
Bond Strength ◽  
Calcium Aluminate ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Mineral Trioxide Aggregate ◽  
Acrylic Resin ◽  
Promising Alternative ◽  
Mean Values ◽  
Significant Difference ◽  
Molar Teeth

ABSTRACT Objective: To evaluate the shear bond strength of a novel calcium aluminate-based cement, EndoBinder (EB), to dentine in comparison with Grey and White Mineral Trioxide Aggregate (MTA). Materials and Methods: Root canal hemi-sections obtained from 30 extracted molar teeth were embedded in self-polymerized acrylic resin and were grounded wet in order to obtain a flat dentine surface. Next, the roots were randomly assigned into three groups (n = 10), according to the cement used, as follows: EB: EndoBinder; WMTA: White MTA and GMTA: Grey MTA. The shear bond strength test was performed using a Universal Testing Machine (0.5 mm/min) and the data were submitted to statistical analysis (1-way ANOVA and Tukey tests, P < 0.05). Results: EB presented the highest shear bond strength values; however, there was no statistically significant difference in comparison with GMTA (P > 0.05). WMTA presented the lowest mean values, which were significant in comparison with EB (P < 0.05). Conclusions: The novel calcium aluminate-based cement presented higher shear bond strength than WMTA, and should be considered as a promising alternative in endodontic therapy.

Effect of Interchanging Liquid Components of Two Auto-Polymerizing Orthodontic Acrylic Resins in their Flexural Properties

2014 ◽  
Vol 1025-1026 ◽  
pp. 797-802 ◽  
Author(s):  
Tassanaporn Saen-Isara ◽  
Surachai Dechkunakorn ◽  
Niwat Anuwongnukroh ◽  
Toemsak Srikhirin ◽  
Siriporn Tanodekaew
Keyword(s):  
Setting Time ◽  
Acrylic Resin ◽  
Flexural Properties ◽  
Acrylic Resins

Objective: To evaluate the effects of interchanging the liquid components of two commercially available orthodontic auto-polymerizing acrylic resin in their flexural properties, clarity and setting time

Sign in / Sign up

Export Citation Format

Share Document