Hot, warm or cold forging. Repair conditions prior to delivery

2015 ◽  
Keyword(s):  
Cold Forging

A modern technique for high productivity cold forging

1962 ◽  
Vol 41 (9) ◽  
pp. 552 ◽  
Author(s):  
R. Hayward ◽  
P.J. Mullins
Keyword(s):  
Cold Forging ◽  
High Productivity ◽  
Modern Technique

Some investigations on punch force in cold forging process by FE simulation

2021 ◽  
Author(s):  
Praveenkumar M. Petkar ◽  
V. N. Gaitonde ◽  
T. K. G. Raju
Keyword(s):  
Fe Simulation ◽  
Cold Forging ◽  
Punch Force ◽  
Forging Process

scholarly journals Anti-Galling Cold, Dry Forging of Pure Titanium by Plasma-Carburized AISI420J2 Dies

2021 ◽  
Vol 11 (2) ◽  
pp. 595
Author(s):  
Tatsuhiko Aizawa ◽  
Tomoaki Yoshino ◽  
Yohei Suzuki ◽  
Tomomi Shiratori
Keyword(s):  
Pure Titanium ◽  
Solid Lubrication ◽  
Cold Forging ◽  
Contact Interface ◽  
Metallic Titanium ◽  
Low Friction ◽  
Debris Particles ◽  
Titanium Wire ◽  
Oxide Debris

A bare AISI420J2 punch often suffers from severe adhesion of metallic titanium as well as titanium oxide debris particles in dry, cold forging of biomedical titanium alloys. This punch was plasma-carburized at 673 K for 14.4 ks to harden it up to 1200 HV on average and to achieve carbon supersaturation in the carburized layer. This plasma-carburized punch was employed in the cold, dry forging of a pure titanium wire into a flat plate while reducing the thickness by 70%. The contact interface width approached the forged workpiece width with increasing the reduction ratio. This smaller bulging deformation reveals that the workpiece is upset by homogeneous plastic flow with a lower friction coefficient. This low-friction and anti-galling forging process was sustained by an in situ solid lubrication mechanism. Unbound free carbon was isolated from the carbon-supersaturated AISI420J2 matrix and deposited as a thin tribofilm to protect the contact interface from mass transfer of metallic titanium.

scholarly journals Cold Forging Effect on the Microstructure of Motorbike Shock Absorbers Fabricated by Tube Forming in a Closed Die

2021 ◽  
Vol 11 (5) ◽  
pp. 2142
Author(s):  
Trung-Kien Le ◽  
Tuan-Anh Bui
Keyword(s):  
Material Flow ◽  
Cold Forging ◽  
Technological Parameters ◽  
Forming Process ◽  
Tube Forming ◽  
Shock Absorbers ◽  
Thin Walled Tube ◽  
Thin Walled ◽  
Quality Of Products ◽  
Forming Defects

Motorbike shock absorbers made with a closed die employ a tube-forming process that is more sensitive than that of a solid billet, because the tube is usually too thin-walled to conserve material. During tube forming, defects such as folding and cracking occur due to unstable tube forming and abnormal material flow. It is therefore essential to understand the relationship between the appearance of defects and the number of forming steps to optimize technological parameters. Based on both finite element method (FEM) simulations and microstructural observations, we demonstrate the important role of the number and methodology of the forming steps on the material flow, defects, and metal fiber anisotropy of motorbike shock absorbers formed from a thin-walled tube. We find limits of the thickness and height ratios of the tube that must be held in order to avoid defects. Our study provides an important guide to workpiece and processing design that can improve the forming quality of products using tube forming.

scholarly journals Multi-Stage Cold Forging Process for Manufacturing a High-Strength One-Body Input Shaft

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 532
Author(s):  
A Jo ◽  
Myeong Jeong ◽  
Sang Lee ◽  
Young Moon ◽  
Sun Hwang
Keyword(s):  
High Strength ◽  
Microstructural Characterization ◽  
Fatigue Tests ◽  
Machining Process ◽  
Cold Forging ◽  
Element Analysis ◽  
Forging Process ◽  
Input Shaft ◽  
Multi Stage ◽  
The One

A multi-stage cold forging process was developed and complemented with finite element analysis (FEA) to manufacture a high-strength one-body input shaft with a long length body and no separate parts. FEA showed that the one-body input shaft was manufactured without any defects or fractures. Experiments, such as tensile, hardness, torsion, and fatigue tests, and microstructural characterization, were performed to compare the properties of the input shaft produced by the proposed method with those produced using the machining process. The ultimate tensile strength showed a 50% increase and the torque showed a 100 Nm increase, confirming that the input shaft manufactured using the proposed process is superior to that processed using the machining process. Thus, this study provides a proof-of-concept for the design and development of a multi-stage cold forging process to manufacture a one-body input shaft with improved mechanical properties and material recovery rate.

A combined approach to determine workpiece-tool-press deflections and tool loads in multistage cold-forging

2011 ◽  
Vol 211 (1) ◽  
pp. 35-42 ◽  
Author(s):  
V. Krušič ◽  
M. Arentoft ◽  
S. Mašera ◽  
A. Pristovšek ◽  
T. Rodič
Keyword(s):  
Cold Forging ◽  
Combined Approach
Sign in / Sign up

Export Citation Format

Share Document