Light conveyor belts. Determination of the maximum tensile strength

AbstractWeld quality mainly depends on the weld bead geometry and mechanical-metallurgical characteristics of the welded joint which has a direct relationship with the type of welding process being used and its input process parameters i.e. welding current, arc voltage, travel speed etc. In the present study, determination of tungsten inert gas (TIG) welding input parameters for achieving maximum tensile strength of 316L austenitic stainless steel is investigated. Box-Behnken design of response surface methodology has been employed to formulate the experimental plan to identify the effect of process parameters on tensile strength. Square butt joint configuration has been made using three factors - three levels of welding input parameters. Joint strength has been evaluated by notch tensile strength (NTS) and Unnotch tensile strength (UTS) method and correlated with microstructure and micro hardness of the weld. The results indicate that gas flow rate has greater influence on both NTS and UTS followed by welding current.

Download Full-text

A Proposition for the Estimation of the Maximum Tensile Strength of Variously Charged Nanocellulosic Film Materials Provided by Vacuum Filtration

Nanomaterials ◽

10.3390/nano11020543 ◽

2021 ◽

Vol 11 (2) ◽

pp. 543

Author(s):

Tom Lindström

Keyword(s):

Tensile Strength ◽

Strength Properties ◽

Vacuum Filtration ◽

Suggested Procedure ◽

Maximum Tensile Strength ◽

Research Activities ◽

Experimental Laboratory ◽

Two Measures ◽

The Impact

This short investigation deals with a review of the tensile strength properties of six different types of nanocellulose films (carboxymethylated, carboxymethylcellulose-grafted, enzymatically pretreated, phosphorylated, sulfoethylated, and alkoxylated nanocellulose films) manufactured using identical protocols and the determination of the apparent nanocellulose yield of the same nanocelluloses and their tensile strength properties at different extents of delamination (microfluidization). The purpose was to test a previously suggested procedure to estimate the maximum tensile strength on these different procedures. A second goal was to investigate the impact of the nanocellulose yield on the tensile strength properties. The investigations were limited to the nanocellulose research activities at RISE in Stockholm, because these investigations were made with identical experimental laboratory protocols. The importance of such protocols is also stressed. This review shows that the suggested procedure to estimate the maximum tensile strength is a viable proposition, albeit not scientifically proven. Secondly, there is a relationship between the nanocellulose yield and tensile strength properties, although there may not be a linear relationship between the two measures.

Download Full-text